Keysights InfiniiVision 1000 X-Series Oscilloscopes Are Engineered To Give You Quality, Industry-Proven Technology At Unbelievably Low Prices. Now Its Easy To Get Professional Measurements And Accessible Expertise At Your Fingertips. Dont Settle For Less And Test To Impress. Keysight Model DSOX1102A - 100 MHz Bandwidth, 50,000 Waveform/S Update Rate, Record Length 1Mpts , Segmented Memory, Mask/Limit Test For Pass/Fail Analysis, Built 3-Digit Digital Voltmeter Meter, Frequency Counter, Built In Help Training Signals. Lowest Vertical Sensitivity 500microV/Div, Automatic Measurements Including Math, FFT. USB Interface, 3 Year Warranty. Optional Analog Bus And Protocol Triggering/Decode. Refer Keysight Datasheet For Detailed Specifications. Prices Indicated Including GST @18 Percent..
Other Specifications Download Specification | |
---|---|
Type | Digital |
Operating System | Non -Windows |
Bandwidth Upgradability | No |
No. Of Analog Channels | 2 Number |
Digital Channels | No |
No. Of Digital Channels | NA Number |
Record Length Per Digital Channel Simultaneously | NA GS/sec |
Sampling Rate Per Digital Channel Simultaneously | NA Mega Points |
Min. Detectable Pulse Width | NA ns |
Memory Upgradability | No |
Segmented Memory Feature Availability | Yes |
Vertical Sensitivity | 500mV per Div to 10 V/div |
Vertical Resolution | 8 bits |
Coupling | AC, DC, Ground On Screen |
Time Base Range | 5 nS/Div To 50 S/Div |
Trigger Types | Edge, Pulse Width, Video, Pattern/State, External |
Measurements | 24 Built-In Automatic Measurement In Single Snap Shot, Peak-To-Peak, Maximum, Minimum, Amplitude, Top, Base, Overshoot, Pre-Shoot, Average- N Cycles, Average-Full Screen, DC RMS-N Cycles, DC RMS-Full Screen, AC RMS-N Cycles, AC RMS-Full Screen (Standard Deviation), Period, Frequency, Counter, + Width, - Width, +Duty Cycle, -Duty Cycle, Bit Rate, Rise Time, Fall Time, Delay, Phase, X At Min Y, X At Max Y |
Frequency Analysis Feature | No |
In-built Frequency Counter | Yes |
In-built Function Generator | No |
Acquisition Modes | Normal, Peak Detect, Averaging, High Resolution |
Display Type | Colour |
Display Size | 7 Inches WVGA Display CM |
I/O Interface | USB Interface |
Standard Accessories To Be Supplied | Two Nos. 1:1/10:1 Switchable 200MHz Passive Probe, Power Chord |
Operating Temperature Range | 0 To +50 C Degree C |
Operating Humidity (RH) | Up To 95 RH At Or Below +40 C (Non Condensing) % |
Power Supply | 230V +- 10 , 50Hz |
Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : 1. Dry Heat Test : 45 Deg C For 16 Hours As Per IS:9000/Pt.3/sec.5/1977 (reaffirmed In 2007) 2. Cold Test : 0 Deg C For 4 Hours As Per IS:9000/Pt.2/sec.4/1977 (reaffirmed In 2007) 3. Damp Heat Test: 95% RH At 40 Deg C, Two Cycles Of 24 Hours Each Separated By A Gap Of 4 Hours As Per IS:9000/Pt.5/sec. 1/1991 (reaffirmed In 2007) The Oscilloscopes Shall Be Checked Functionally Before And After Recovery Period Of 1-2 Hours Of The The Environmental Test Sequence As Above. Functional Tests Shall Include Switching ON And Calibration | yes |
Test Report No. | DSOX1102ACN57114481 |
Test Report Date | 10-MARCH-2017 |
Name Of The Lab | Keysight Technologies Penang Malaysia |
Warranty | 3 Year |
Real Time Bandwidth | 100 MHz |
Record Length Per Analog Channel Simultaneously | 1 Mpts Mega Point |
Sample Rate Per Analog Channel Simultaneously | 1 GSa/s GS/sec |
Waveform Update Rate | 50000 wfrm/s Waveforms/ |
Time Base Accuracy | 50 PPM |