Keysight N9917A Offered Configuration Has Full 2-Port Vector Network Analyzer From 30KHz To 18GHz, 90dB Dynamic Range, 42dB Directivity, Plus-Minus 0.7ppm Frequency Accuracy, Built In CalReady, Data Points Upto 10,001, User Interface And Smith Chart And Polar Display, Weather Resistant, Field-Friendly Design, And No Fans Or Vents With Full MIL-PRF-28800F Class 2 Compliance, Expand The Capabilities With Optional Spectrum Analyzer From 5KHz To 18GHz, Built-In Power Meter, Vector Voltmeter, GPS Receiver, Channels Scanner, Independent Signal Generator, Interference Analyzer, Real Time Spectrum Analyzer-RTSA, Pulse Measurement, Built-In Variable DC Source, TDR Measurement, ECal Support. USB, LAN Connectivity, 3.5 Hour Battery Operating Time, Standard 1 Year Warranty. Offered Configuration Is N9917A With Option 010,112,210,211,N9910X-701,85519A And 11878A. Refer Keysight Datasheet For Detailed Specifications. Prices Indicated Including GST @18 Percent. Delivery Period 60 Days..
Other Specifications Download Specification | |
---|---|
Description Of The Item | Two port vector network analyzers 6GHz(without spectrum analyser) |
Frequency Range | NA |
Aging Rate Of Spectrum Analyzer Frequency: Better Than 1x10-6 /Year | NA |
Frequency Counter Resolution(min.) | NA Hz |
Frequency Span | NA |
Spectral Purity:SSB Phase Noise @10KHz Offset Shall Be Less Than -90dBc/Hz At 1GHz | NA |
Spectral Purity :Harmonics @ -40 DBm Level Shall Be Less Than Or Equal To -60dBc | NA |
Sweep Time @span >or= 1 KHz | NA |
Sweep Time @span = 0 Hz | NA |
Resolution Bandwidth (-3dB) | NA |
Video Bandwidth | NA |
Amplitude : Max Input Level For Protection | NA dBm |
Amplitude : Max Input Level For Measurement | NA dBm |
Amplitude :level Measurement Uncertainity | NA dB |
Average Noise Level Displayed | NA |
Markers | NA |
Trigger | NA |
Display | TFT Colour display with provision for three traces |
Interface | USB and LAN |
Measurement Features | NA |
Software For Transfer Of Screen Shot/measurement Data To PC | Yes |
2-port Vector Network Analyzer Functionality ,for General Purpose Testing Applications In The Field,specially For Cable And Antenna Measurements, Is Available. | Yes |
Frequency Range For 2port Vector Network Analyzer | 2 MHz to 6 GHz |
Frequency Resolution (CW ON) For 2port Vector Network Analyzer | 10 Hz |
Return Loss For 2port Vector Network Analyzer | 0.00 to 60 dB |
VSWR For 2port Vector Network Analyzer | 1.01 to 10.00 |
Cable Loss For 2port Vector Network Analyzer | 0.00 to 30.00 dB |
For 2port Vector Network Analyzer: Calibration With Precision Calibration Components-open, Short, Load Should Be Included To Achieve Directivity > 35 DB | Yes |
For 2port Vector Network Analyzer: Distance-to-fault In Co-axial Cables Shall Be Possible | Yes |
Phase Range For 2port Vector Network Analyzer | -180 to +180 degree |
Phase Resolution For 2port Vector Network Analyzer | 0.01 deg |
RF Output Port For 2port Vector Network Analyzer | Type N, female, 50Ohm |
Dynamic Range For 2port Vector Network Analyzer | 60 dB |
Nominal Port Power Output For 2port Vector Network Analyzer:Hi Power/Lo-Power Selectable(power Levels Corresponding To Hi And Lo Levels Shall Be Indicated By Bidder. | Selectable And Hi-Power= + 3 DB At 3 GHz Low-Power = -45dBm |
Measurement Of S11 & S21 And Smith Chart Measurement Shall Be Possible | Yes |
For 2port Vector Network Analyzer :Vector Voltmeter For Comparision And Verification Of The Phase Of The Phase-matched Cables Shall Be Available | NA |
For 2port Vector Network Analyzer:Group Delay Measurement Shall Be Possible.Details To Be Declared | Yes Available |
Operating Temperature | 5 to 40 degree C & 80 RH 40 degree C |
Power Requirement | 230 +- 10 VAC, 50Hz & External DC Input +12.5V to 15V with rechargeable battery of 1500 mAH or higher |
Warranty | 1 years |
OEM Shall Have ISO:14001 Certification For Their Manufacturing Works | yes |
One Set Of Operation And Maintenance Manual Shall Be Supplied | yes |
Standard Accessories Shall Be Supplied | yes |
Availability Of Test Reports From Central Govt/NABL/ILAC Accredited Lab Covering All The Features & Functional Requirements Including Environmental Tests As Per Specifications | yes |
Test Report No | 4212891-5070622-1 |
Test Report Date | 23-NOV-2016 |
Name Of Lab | Keysight Technologies |
Address Of The Lab | Keysight Technologies Penang Malaysia |