IRON BOX SIZE 30X18X15 INCH.
Other Specifications Download Specification | |
---|---|
Mode Of Purchase On GeM | Bidding (Freight Intensive Item) |
Steel Trunk Size (LxWxH) | 800x525x375(Size A) mmXmmXmm |
Conforming To DGS&D Drawing No GE/RC-87/1, GE/RC-87/2 And GE/RC-87/3 | YES |
Read DGS&D Drawing And Fully Understood | YES |
Trunk Shall Comply With The Requirements Of Size Large (Big Steel Truns) Of IS 7257/1973 Unless Otherwise Specified In The DGS&D Drawings | YES |
Tolerance In Length, Width And Height | +-5 mm |
All Joint Shall Be Double Seamed | YES |
Method Of Component Fixing | By Riveting |
Hasp And Staple | Size 150 mm of Type-2 (Fig, 2) of IS 363-1993 |
Material Of Body,lid Cover, Pocket And Channel | CRC steel Sheet 0.8 mm thick conforming to Designation D (CR2) of IS 513-2008 |
Minimum Weight | 16.5 Kg ( Size A) |
Steel Trunk Shall Be Properly Cleaned, De-greased, Pickeled And Phosphated Conforming To Class C Of IS 3618/1996 | YES |
Finish | one coat of primer red oxide zinc chromate and then two coats of stove ennamel paint (Oven Dried) |
Colour | Outside Black colour and inside Blue colour of shade No 176- Phirozi of IS 5-2007 |
Embossing Of Indentor Inscription | Indentor inscription shall be embossed on lid having 35 mm word height |
Punching/Embossing Of Trade Mark Giving Manufacturer Name | Minimum 20 mm height on front right bottom corner |
Marking On Steel Trunk | Year of Manufacturing, Firm name or Trade mark, Steel trunk size and Minimum Weight |
Availability Of Test Reports Of From Central Govt./State Govt/NABL/IL AC Accredited Lab To Prove Conformity To The Specification | YES |
Test Report To Be Furnished To The Buyer On Demand | YES |
Test Report No | NA |
Test Report Date | NA |
Name Of The Lab | NA |
Address Of The Lab | NA |