The MC9190-Z is Zebras new best-in-class standard for handheld RFID readers. With its high RF sensitivity that provides for greater accuracy,.
Other Specifications Download Specification | |
---|---|
Display Size | 3 mm |
Display Type | Colour TFT |
Display Resolution | 320 x 320 Pixels |
Processor | Dual Core or higher ARM |
Processor Speed | 1 GHz |
Operating System | Windows 6.5 or higher |
RAM | 256 MB |
Inbuilt Storage (Flash Memory) | 1 or higher GB |
Storage Expandability Through Micro SD Card | 8 GB |
Integrated QRcode/ Barcode Reader | Available |
If Available, Scanning Speed | NA Scans/sec |
Camera (for Reading QRcode/ Barcode) | Available |
If Available, Camera Resolution | NA |
Key Pad | Hard alphanumeric |
Interface | USB 2.0 or higher |
WI-fi Connectivity | Available |
Bluetooth Connectivity | Available |
GPS Connectivity | Not Available |
GSM SIM Slot | Not Available |
SAM Slot | Not Available |
Built-in Speaker | Available |
Battery Chemistry | Li Ion |
Battery Capacity | 4800 mAH |
Battery Back Up (Device In Operation While All Function Of Device Active) | Minimum 6 Hours |
Connectivity (presence/absence) Indicator | Available |
Signal Strength Indicator | Available |
Battery Status Indicator | Available |
Accessories To Be Supplied With The Equipment | Cradles, Charger,Charging cable |
Terminal Management | Device is remotely manageable in secured mode for Software/Patches updation through available communication |
Certification Available | UL, CE, RoHS |
Drop /Free Fall Test | Drop /Free Fall test in unpacked, switched off and normal handling conditions (Height: 1 m , Total No. of falls:2) |
Vibration Test | Vibration Test should be in packed condition, switched off condition (10-150Hz, 0.15mm/2g, 10 sweep , cycles/axes) |
Bump Test | Bump test should be in packed condition, switched off condition. (1000 Bumps, 40g, in vertical position |
Dimensions (H X W X L) | 19.34 cm H x 11.94 cm W x 16.26 cm mm x mm x |
Weight | 650 gms |
BIS Registration No. Under Compulsory Registration Scheme & Its Validity | On request |
Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : (a) Dry Heat : For 16 Hrs. At A Temp. Of 55 Degree C In Accordance With IS:9000/part-3/section-5/1977 (reaffirmed In 2007). (b) Cold Test : For 4 Hrs. At A Temp. Of -10 Degree C In Accordance With IS:9000/part-2/section-4/1977 (reaffirmed In 2007). (c) Damp Heat (Cyclic)Test : For 2 Cycles Of 24 H Each At A Temp. Of 40 Degree C & 95% RH In Accordance With IS:9000/part-5/section-1/ 1991 (reaffirmed In 2007). After Environmental Conditioning Sequence As Above And A Recovery Period Of Two Hours, The Instrument Shall Be Checked For Complete Functional Parameters, Which Should Be With In Limits Including 1:1 Authentication (Test Reports Are To Be Furnished When Demanded By Buyer) | Yes |
Test Report No. | On Request |
Test Report Date | On Request |
Name Of The Lab | On Request |
Warranty | 3 Year |