1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
HMT High Speed Precision Lathe Model NH26 /3000 With A2-8 Inches , straight bed with Gap version with removal bridge pieces .Built With 11 Kw Motor Power For Heavy Stock Removal, Precision And Versatility , Self -Compensating Hydraulic Clutch For Spindle Forward Reverse RPM , heavy box type tail stock ,Forged Steel Spindle Hardened Ground Supported On Gamet Double Row Taper Roller Bearing . Computer Optimized Bed And Head Stock Drive . All Drive Gears Case Hardened And Ground . Dry Sump Lubrication For Minimum Thermal Deformation .Rigid Carriage Cross Slide To Withstand Heavy Metal Removal, Induction hardened integral guide ways , Emergency push button , star delta starter ,set of spares ,3 jaw precision self centering chuck dia 250mm, Precision face plate 355,Universal face plate 480mm ,550 mm , Inch /Metric dual dial for cross,top slide,Apron and Tail stock ,work driver with mounting flange dia. 12-63mm , Special cutting tool kit ,Roller follow rest and with full packing.
| Other Specifications Download Specification | |
|---|---|
| Lathe Machine Confirming To IS 6893-1988part 1 With Latest Amndmt. | Yes |
| Lathe Machine Confirming To IS 210 :1993 With Latest Amndmt. | Yes |
| Manually Operated Lathe | Yes |
| Geared Mechanism | Yes |
| Distance Between Centers (mm) X Swing Over Bed (mm) | 3000 x 600 |
| Type | Optional |
| Distance Between Centres | 3000 mm |
| Swing Over Bed | 575 mm |
| Center Height | 260 mm |
| Swing Over Cross Slide | 350 mm |
| Swing Over Carriage Wing | 545 mm |
| Swing In Gap | 800 mm |
| Width Of Gap In Front | 175 mm |
| Type Of Bed | Straight Gap Bed 2 V 2 Flat |
| Length Of Bed | 4270 mm |
| Width Of Bed | 415 mm |
| Gap In Bed | 175 mm |
| Rapid Transverse Of Saddle | 0 mm |
| Rapid Transverse Of Cross Slide | 0 mm |
| Maximum Feed Force | 5000 N |
| Maximum Facing Diameter | 600 mm |
| Maximum Weight Of Workpiece That Can Be Held Between Chuck And Supported By Live Centre | 320 kg |
| Maximum Weight Of Workpiece That Can Be Held Between Chuck And Supported By Dead Centre | 600 kg |
| Torque ,Maximum On Spindle | 11 Nm |
| Type Of Spindle | ASA 350 |
| Size Of Spindle | 165 mm |
| Type Of Spindle Nose | A2 8 inches |
| Taper Bore In Spindle As Per IS 2582-1972 With Latest Amndmt. | ASA 350 |
| Taper Bore In Spindle Sleeve As Per IS1715-1986 With Latest Amndmt. | MT5 |
| Bore In Spindle | 80 mm |
| No. Of Spindle Speed In Forward Direction | 16 |
| No. Of Spindle Speed In Reverse Direction | 7 |
| Spindle Speed Range In Forward Direction | 32 to 1632 |
| Spindle Speed Range In Reverse Direction | 48 to 1150 |
| Type Of Chuck | 3 Jaw Self Centered |
| Diameter Of Chuck ,Maximum | 600 mm |
| Diameter Of Chuck ,Minimum | 250 mm |
| Travel Of Cross Slide | 300 mm |
| Travel Of Top Slide | 150 mm |
| Type Of Tool Holder | Square Shank |
| Tool Shank Size As Per IS 1983:1958 With Latest Amndmt.(mm X Mm) | 25x25 |
| Tail Stock Sleeve Diameter | 90 mm |
| Tail Stock Spindle Taper As Per IS 1715:1986 With Latest Amndmt. | MT5 |
| Maximum Offset Of Tailstock On Either Side Of Center Line | 4 mm |
| Sleeve Travel Type ( Tail Stock) | Manual |
| Travel Of Sleeve | 200 mm |
| Lead Screw Diameter | 36 mm |
| Lead Screw Pitch | 6 mm |
| Lead Screw Feed Range ( Longitudnal Mm/min) | 0.04 to 2.24 |
| Lead Screw Feed Range ( Cross In Mm/min) | 0.02 to 1.12 |
| Metric Thread Range In Mm | 0.5 to 28 |
| British Thread Range In TPI | 1 to 28 |
| Module Of Thread | 14 mm |
| Diameteral Pitch | 112 mm |
| Rapid Traverse Motor Power In Kw | 0 kw |
| Type Of Cooling | Natural Air Cooling |
| Coolant Pump Output As Per IS 2161 :1962 With Latest Amndmt. | 0.1 kw |
| Coolant Pump Speed In Rev/min | 2800 |
| Coolant Pump Discharge At Maximum Working Height As Per IS 2161 :1962 With Latest Amndmt.in L/min | 30 |
| Type Of Lubrication | Dry sump Lubrication |
| Length Of Lathe Machine | 4455 mm |
| Width Of Lathe Machine | 1176 mm |
| Height Of Lathe Machine | 1490 mm |
| Weight Of Lathe Machine With Electrical And Standards Accessories | 3230 kg |
| Noise Emitted By Machine As Per IS 10998:1984with Latest Amndmt. | 85 dB |
| Mechanical Guarding As Per IS 9474 :1980 With Latest Amndmt. | Yes |
| Colour Of Lathe Machine As Per IS 5 :1978with Latest Amndmt. | Apple Green |
| In Possession Of Technical Evaluation Report As Per IS :11118 | Yes |
| Lead Screw -Ground Profile& Pitch Accuracy 0.03 Mm Over A Length Of 300 Mm. | Yes |
| Machine Confirming Full Power Cutting Load Test To Full Length Turning Capacity Of Machine | Yes |
| Lubrication System Requirement As Per IS:11118 | Yes |
| Cooling System Requirement As Per IS :11118 | Yes |
| Positioning Accuracy Meets The Minimum Requirement As Per IS:1878 For Cumulative Error | Yes |
| Positioning Accuracy Meets The Minimum Requirement As Per IS:1878 For Repeatibility | Yes |
| Positioning Accuracy Meets The Minimum Requirement As Per IS:1878 For Backlash | Yes |
| Positioning Accuracy Meets The Minimum Requirement As Per IS:1878 For Minimum Possible Requirement | Yes |
| Geometric Accuracy Test Of General Purpose Parallel Lathe Machines As Per IS 1878-1971 With Latest Amndmt. | Yes |
| Geometric Accuracy Test Of Precision Lathe Machines As Per IS 6040-1972 With Latest Amndmt. | Yes |
| Machine Bed & Tail Stock Casting Grade Confirming To FG-260 With Hardness 180-230BHN As Per IS 11118-1997 With Latest Amndmt. | Yes |
| Tailstock Sleeve Case Hardening Steel 15Ni7Cr4M02 ,, Hardened And Ground To A Hardness Of 58-62 HRCas Per IS 1118-1997 With Latest Amndmt. | Yes |
| Head Stock Drive Gears Confirming To Alloy Steel Material Specification 15 Ni 7 Cr 4 M02 , Hardened 58-62 HRC And Profile Ground With 0.8 Micron Surface Roughness Ra Value | Yes |
| Main Spindle Confirming To C2R Grade Forged Steel And Hardened 58-62 HRC. / Ground With 0.8 Micron Surface Roughness Ra Value | Yes |
| Main Spindle Bearing Confirming Pre-loaded GAMET/TIMKEN Make Spindle Bearing High Precision Class Double Row Taper Roller Bearings At Front & Single Row Taper Roller Bearing At Back | Yes |
| Machine Confirming Dynamically Balanced Spindle And Other Parts Rotating With Peripheral Speed Of More Than 3m/sec | Yes |
| Spindle Forward/Reverse Drive Transmission Through Hydraulic Friction Clutch | Yes |
| "Electric Equipment I.e. Motor And Control Gear Suitable For Operation On 415 V, 3 Phase, 50 Hz., 4 Wire, A.C.supply With Suitable Ammeter " | Yes |
| DRIVING PLATE WITH PEG | Yes |
| Coolant Equipment & Swarf Tray | Yes |
| SPLASH GAURD : | Yes |
| SPINDLE REDUCTION SLEEVE: | Yes |
| 60Deg.DEAD CENTRE-2 Nos.: | Yes |
| ROTATING CENTE-1Nos.: | Yes |
| QUICK CHANGE TOOL POST WITH TOOL HOLDERS | Yes |
| QUICK INDEXIBLE SQUARE TOOL POST | No |
| SET OPERTING INSTRUCTION MANUAL& A SET OF OPERATING TOOLS. | Yes |
| 3Jaw Self Centring Chuck | Yes |
| Precision 3 Jaw Self Centring Chuck ( Hydraulic /Pneumatic Complete Chuck ) | Yes |
| Chuck Gurad | Yes |
| Rear Tool Post | No |
| Universal Face Plate | Yes |
| Precision Face Plate | Yes |
| Cast Iron Face Plate | No |
| Collet Chuck & Collets. | Yes |
| Rear Tool Holder. | No |
| Steady Rest. | No |
| Roller Steady Rest | Yes |
| Follow Rest | No |
| Longitudinal Stop. | Yes |
| Roller Stop. | Yes |
| Taper Turning Attachment. | Yes |
| A Set Of Change Gear For DP Threads. | Yes |
| Multi Copying Attachment | No |
| Machine Lamp | Yes |
| Swraf Tray Complete With Coolant Equipment | No |
| Four Jaw Chuck | No |
| Availability Of Drawing For Foundation | Yes |
| Warranty | 1 Years |
| Annual Maintenance Contract For Machine | No |
| Period Of AMC | 0 Years |
| Availability Of Test Report From Central Govt./NABL/ILAC Acredited Lab To Prove Confirmity To Specification | Yes |
| Test Report No. | CHN15X029 |
| Test Report Date | 25-03-2015 |
| Name Of The Lab | Indian Register of shipping |
| Address Of The Lab | KOCHI PORT, KERELA |
| Purpose Classification | General Purpose |
| Lathe Machine Type | Gap Lathe |
| Main Motor Power ( For Light Duty Lathe ≥ 3kw,For High Speed Precision Lathe ≥ 11kw, For Heavy Duty Lathe ≥ 18kw) | 11 kw |
| Erection And Commisioning Charges Included In Offered Prices Without Foundation | Yes |
| Spindle Forward/Reverse Drive Transmission Through Electro Magnetic Double Clutch | No |
| Nature Of Duty Of Operation Of Lathe | High Speed Precision Lathe |
Price Dekho Price List in india© 2018 GeM All rights reserved.
