Liebert ITA 10 kVA 1x1 UPS System.
Other Specifications Download Specification | |
---|---|
Technology | (a) IGBT based PWM Technology (b) Microprocessor controlled Digital Design (c) Double Conversion True On-line UPS (d) Manufacturer: IS9001 and IS14001 Certifiedand Small 2U height maximizes available space. Rack-mount with user replaceable battery and Add on batteries for extended back-ups |
Overall Efficiency (AC-AC) (in %age) | > 87 Percentage % |
Input Voltage And Range (in Volt) | 230V 50Hz and Range 160 Volt - 280 Volt ( Full Load) and 230 Volt 50Hz and Range 100 Volt - 280 Volt ( Half Load) Volt |
Input Frequency Range (in Hz) | 50-60 Hz Hz |
In Put Phase | Single Phase with ground |
Input Power Factor | 0.95 or better |
Output Voltage | 220 Volt AC - 230 Volt AC |
Voltage Regulation (in %age) | +/-3 Percentage % |
Frequency (in Hz) | 50 Hz +/- 0.1 Percentage Hz |
Harmonic Distortion (THD) (in %age) | < 3 Percentage (linear load) % |
Output Waveform | Pure Sine wave |
Crest Factor | 3 ratio 01 |
Output Power Factor | 0.9 or more |
Battery Backup | Minimum 1 hour battery backup ( Min. VAH 12000) |
Battery Type | Sealed Lead Maintenance Free VRLA type (Lead Calcium SMF batteries NOT acceptable) |
DC Bus Voltage | As per OEM Architecture |
Transfer Time (in Milli Second) | 0 milli second ms |
Battery Enclosure | MS Rack Powder Coated |
Operating Temperature (in Degree C) | 0 to 40 Degree C deg.C |
Noise Level | < 55 dB at 1 Meter dB |
Alarms And Indications | All necessary alarms and indications essential for performance monitoring of UPS to be incorporated |
By Pass | Automatic By pass Switch |
Compatibility | UPS to be compatible with DG Set supply |
Communication Interface | (a) Standard RS 232 port for software interface (b) Standard SNMP interface support |
Dimension In Mm (Height X Width X Depth) | 85x435x500 mm |
Certifications | IS9001 and IS14000 and EN 60950 and EN/IEC 62040-2 and cULus and CE and Federal Communications Commission |
Environnemental Compliance | RoHS 7b Exemption |