1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
Good quality garbage cleaner..
| Other Specifications Download Specification | |
|---|---|
| Frame Structure | Made of MS Angle of Size 25x25x3 mm with 4 Nos horizontal at the top, 4 Nos horizontal at the bottom, 4 Nos verticle at corners and 2 nos verticle on sides |
| Length Of Frame Structure | 800 mm |
| Width Of Frame Structure | 700 mm |
| Height Of Frame Structure | 250 mm |
| Axle Diameter (Front) | 20 mm |
| Ball Bearing System On Front Wheels | Single Ball Bearing |
| Nos Of Wheels On Front Side | 2 Nos. |
| Diameter Of Front Side Wheel | 300 mm |
| Width Of Front Side Wheel | 50 mm |
| Type Of Tyre Of Front And Rear Wheel | Solid Rubber |
| Material Of Front And Rear Wheel | Virgin Nylon |
| Shaft Diameter | 20 mm |
| Ball Bearing System On Rear Wheel | Single Ball Bearing |
| Nos Of Wheels On Rear Side | 2 Nos |
| Diameter Of Rear Side Wheels | 200 mm |
| Width Of Rear Side Wheels | 50 mm |
| Swing Of Rear Wheels | 360 degree Swing on the shaft |
| Plateform Material Of Cart | Mild Steel |
| Thickness Of Sheet Of Plateform | 3 mm |
| Construction Of Plateform | Having 12 mm diameter holes at a distance of 200 mm square matrix |
| Lengthwise Number Of Stiffeners Below The Plateform To Support The MS Plate | 1 Nos |
| Widthwise Number Of Stiffeners Below The Plateform To Support The MS Plate | 3 Nos |
| Stiffener Material | M S Angle of size 25 x 25 x 3 mm |
| Handle Material Of The Handcart | M S Pipe of diameter 30 mm and thickness 1.6 mm |
| Length Of Handle Of The Hand Cart | 1500 mm |
| Width Of Handle Of Handcart | 700 mm |
| Height Of Handle Of Handcart From The Ground | 300 mm |
| Pretreatment | Two coats of red oxide after phsphating before painting |
| Paint | Powder coated |
| Colour Of Paint | Green |
| Number Of Plastic Containers Each With Lid And Handle In Each Cart | 4 Nos |
| Minimum Capacity Of The Each Container | 30 Litres |
| Material Of The Plastic Container And Lid | Virgin HDPE |
| Material Of Handle Of Container | Ss |
| Minimum Wall Thickness Of The Plastic Container | 4 mm |
| Maximum Ash Content Of The Container And Lid When Tested As Per Annex D Of IS 14887/2014 | 1 % |
| Colour Of The Container | Geeen |
| Loading Capacity Of The Handcart | 800 Kg |
| Manufacturer's Name Marked On Tha Cart | Yes |
| Year Of Manufacture Marked On The Cart | Yes |
| Manufacturer's Drawing No | Cc19 |
Price Dekho Price List in india© 2018 GeM All rights reserved.
