Offered Model 50 MHz 2 Channel Digital Storage Oscilloscope with 500microV/Div to 10Volt/Div vertical sensitivity, Integrated 3-digit Digital Voltmeter Meter and 5 digit Frequency counter, Built-in training signals, that enable users to quickly learn to capture and analyze simple e.g. sine wave or complex e.g. radar pulse signals with controlled real-time signal generation and It includes dynamic teaching labs contains an array of built-in training signals, Future upgradable hardware based serial protocol decode and triggering application IC, UART/RS232. Offered price is inclusive of GST@18 percent. Delivery period is 45 days..
Other Specifications Download Specification | |
---|---|
Type | Digital |
Operating System | Non -Windows |
Bandwidth Upgradability | No |
No. Of Analog Channels | 2 Number |
Digital Channels | No |
No. Of Digital Channels | NA Number |
Record Length Per Digital Channel Simultaneously | NA GS/sec |
Sampling Rate Per Digital Channel Simultaneously | NA Mega Points |
Min. Detectable Pulse Width | NA ns |
Memory Upgradability | No |
Segmented Memory Feature Availability | No |
Vertical Sensitivity | 500mV per Div to 10 V/div |
Vertical Resolution | 8 bits |
Coupling | AC, DC and Ground on Screen |
Time Base Range | 5 ns/div to 50 s/div |
Trigger Types | Edge, pulse width, video, pattern/state, External |
Measurements | 24 Automatic Measurement in single snap shot, Peak-to-peak, maximum, minimum, amplitude, top, base, overshoot, pre-shoot, average- N cycles, average-full screen, DC RMS-N cycles, DC RMS-full screen, AC RMS-N cycles, AC RMS-full screen standard deviation, Period, frequency, counter, + width, - width, +duty cycle, -duty cycle, rise time, fall time, delay |
Frequency Analysis Feature | No |
In-built Frequency Counter | Yes |
In-built Function Generator | No |
Acquisition Modes | Normal, Peak Detect, Averaging, High Resolution |
Display Type | Colour |
Display Size | 7 Inches WVGA Display CM |
I/O Interface | USB Interface |
Standard Accessories To Be Supplied | Two Nos. 1:1/10:1 Switchable 75MHz Passive Probe, Power Chord, Certificate of calibration, |
Operating Temperature Range | 0 to +50 Degree C Degree C |
Operating Humidity (RH) | Up to 95 Percent RH at or below +40 Degree C (non condensing) % |
Power Supply | 230V +- 10 , 50Hz |
Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : 1. Dry Heat Test : 45 Deg C For 16 Hours As Per IS:9000/Pt.3/sec.5/1977 (reaffirmed In 2007) 2. Cold Test : 0 Deg C For 4 Hours As Per IS:9000/Pt.2/sec.4/1977 (reaffirmed In 2007) 3. Damp Heat Test: 95% RH At 40 Deg C, Two Cycles Of 24 Hours Each Separated By A Gap Of 4 Hours As Per IS:9000/Pt.5/sec. 1/1991 (reaffirmed In 2007) The Oscilloscopes Shall Be Checked Functionally Before And After Recovery Period Of 1-2 Hours Of The The Environmental Test Sequence As Above. Functional Tests Shall Include Switching ON And Calibration | yes |
Test Report No. | EDUX1002ACN56530228 |
Test Report Date | 05-JAN-2017 |
Name Of The Lab | Keysight Technologies Malaysia Sdn Bhd (463532-M) |
Warranty | 3 Year |
Real Time Bandwidth | 50 MHz |
Record Length Per Analog Channel Simultaneously | 100 Kpts Mega Point |
Sample Rate Per Analog Channel Simultaneously | 1 GSa/s GS/sec |
Waveform Update Rate | 50000 Wfrm/s Waveforms/ |
Time Base Accuracy | 50 PPM |