Offered Model 50 MHz 2 Channel Digital Storage Oscilloscope with 500microV/Div to 10Volt/Div vertical sensitivity, Integrated 3-digit Digital Voltmeter Meter and 5 digit Frequency counter, Built-in training signals, that enable users to quickly learn to capture and analyze simple e.g. sine wave or complex e.g. radar pulse signals with controlled real-time signal generation and It includes dynamic teaching labs contains an array of built-in training signals. Built in 20 MHz function generator with Sine, square, ramp, pulse, DC, noise and AM, FM and FSK Modulation capability. Built in Frequency response analyzer capability is achieved with a gain and phase measurement versus frequency Bode plot of any circuit from 20 Hz to 20 MHz. Future upgradable hardware based serial protocol decode and triggering application IC, UART/RS232. Offered price is inclusive of GST@18 percent. Delivery period is 45 days..
Other Specifications Download Specification | |
---|---|
Type | Digital |
Operating System | Non -Windows |
Bandwidth Upgradability | No |
No. Of Analog Channels | 2 Number |
Digital Channels | No |
No. Of Digital Channels | NA Number |
Record Length Per Digital Channel Simultaneously | NA GS/sec |
Sampling Rate Per Digital Channel Simultaneously | NA Mega Points |
Min. Detectable Pulse Width | NA ns |
Memory Upgradability | No |
Segmented Memory Feature Availability | No |
Vertical Sensitivity | 500mV per Div to 10 V/div |
Vertical Resolution | 8 bits |
Coupling | AC, DC and Ground on Screen |
Time Base Range | 5 ns/div to 50 s/div |
Trigger Types | Edge, pulse width, video, pattern/state, External |
Measurements | 24 Built-in Automatic Measurement in single snap shot), Peak-to-peak, maximum, minimum, amplitude, top, base, overshoot, pre-shoot, average- N cycles, average-full screen, DC RMS-N cycles, DC RMS-full screen, AC RMS-N cycles, AC RMS-full screen-standard deviation, Period, frequency, counter, + width, - width, +duty cycle, -duty cycle, bit rate, rise time, fall time, delay, phase, X at min Y, X at max Y |
Frequency Analysis Feature | Yes |
In-built Frequency Counter | Yes |
In-built Function Generator | Yes |
Acquisition Modes | Normal, Peak Detect, Averaging, High Resolution |
Display Type | Colour |
Display Size | 7 - Inches WVGA Display CM |
I/O Interface | USB Interface |
Standard Accessories To Be Supplied | Two Nos. 1:1/10:1 Switchable 75MHz Passive Probe, Power Chord, a comprehensive oscilloscope lab guide, a tutorial written specifically for undergraduate students, and an oscilloscope fundamentals PowerPoint slide set for professors and lab assistants. |
Operating Temperature Range | 0 to 50 Degree C Degree C |
Operating Humidity (RH) | Up to 95 Percent RH at or below +40 Degree C (non condensing) % |
Power Supply | 230V +- 10 , 50Hz |
Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : 1. Dry Heat Test : 45 Deg C For 16 Hours As Per IS:9000/Pt.3/sec.5/1977 (reaffirmed In 2007) 2. Cold Test : 0 Deg C For 4 Hours As Per IS:9000/Pt.2/sec.4/1977 (reaffirmed In 2007) 3. Damp Heat Test: 95% RH At 40 Deg C, Two Cycles Of 24 Hours Each Separated By A Gap Of 4 Hours As Per IS:9000/Pt.5/sec. 1/1991 (reaffirmed In 2007) The Oscilloscopes Shall Be Checked Functionally Before And After Recovery Period Of 1-2 Hours Of The The Environmental Test Sequence As Above. Functional Tests Shall Include Switching ON And Calibration | yes |
Test Report No. | EDUX1002GCN56532163 |
Test Report Date | 06-JAN-2017 |
Name Of The Lab | Keysight Technologies Malaysia Sdn Bhd (463532-M) |
Warranty | 3 Year |
Real Time Bandwidth | 50 MHz |
Record Length Per Analog Channel Simultaneously | 100 Kpts Mega Point |
Sample Rate Per Analog Channel Simultaneously | 1 GSa/s GS/sec |
Waveform Update Rate | 50000 Wfrm/s Waveforms/ |
Time Base Accuracy | 50 PPM |