1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
We provide ISI Mark Industrial Helmet made of high impact, Heat and Chemical resistant HDPE polymer with 6-point adjustable and comfortable Head harness in pin-lock fittings with high absorption and washable Sweatband. Safety Shoes we provide ISI mark Impact resistance, Electrical shock resistance, Chemical Oil Fuel resistant sole, Slip Resistance, Chemical resistant sole upper Temp Resistance 350 C, Energy Absorbing Heel. We are offering Cotton Dotted Hand Gloves. We provide Reflective Safety Jackets are used by person working in sensitive and dangerous areas. These safety jackets increase the visibility of individual at night and poor light conditions. We provide ISI mark Respiratory protection mask is made of comfortable and non-allergic materials which are further enabled with Textile Braided double elastic head bands stitched outside filter area to prevent leakage. In our kit we provide safety handbook. Also we provide free of cost safety kit bag..
| Other Specifications Download Specification | |
|---|---|
| Conformity To EN Standard | EN:471-2003 + A1:2007 |
| Drawing For Reflective Luminous Garments | http://www.dgserver.dgsnd.gov.in/rc/46161712.pdf |
| Drrawing Seen And Understood | Yes |
| This Garment As Per The Given Specification Is To Be Worn Over The Normal Clothing. The Said Specification Covers The Basic Regulations And Requirements That Enhance The Visibility Of The Person By The High Contrast Between The Clothing And The Ambient Background Against Which It Is Seen And By The Larger Areas Of The Conspicuous Materials. The Garment Will Be Effective Day And Night And Provide Greater Visibility, Contrast Level And Personal Recognition Of The Wearer. The Garment Will Provide The Same Qualities Even When Ambient Lighting For Luminaries, Train/automobile/Aircraft Headlamps Or Other Forms Of Lighting Is Present In Work Places. It Should Be Capable Of Signaling Of Wearers Presence Visually Intended To Provide Conspicuity Of Wearer In Hazardous Situation, Under Any Light Condition In Day Time, Night Time And Under Illumination From Luminaries, By Vehicle Headlights In The Dark As Well As Low Lighting Conditions At Dawn Or At Dusk. Garments Mentioned In This Docuements Are Not Applicable For Use Of Fire Fighting Personnel. | Yes |
| Reflective Luminous Garments | High visibility warning garments with synthetic slide fasteners |
| Type Of Garment | Waist coat |
| Size | Small (S) ( Suitable for person of height 152-160 cm, Chest Girth 96-102 cm, Waist Girth 76-81cm) |
| Garment Color | Fluorescent yellow ( for General Use ) |
| Patch Pocket | Yes |
| Marking Of Departmental Identification | Yes |
| BASIC CLOTH:- The Basic Fabric Used Shall Be High Visibility Fluorescent Dyed Material For Enhanced Day Time Visibility Consisting Of 100% Polyester Yarn In Warp And 100% Cotton Yarn In Weft, Woven In 5 End Warp Satin Weave So That Polyester Yarn Having High Reflection Property Will Project On The Upper Surface Of Garment And Cotton Yarn Having Low Reflection Property Will Remain In The Inner Surface Of Garment And Provide Sufficient Comfort To The Wearer Even Though Worn Over Regular Clothing. The Overall Blend Composition Shall Be 65 + / - 3 % Polyester And The Reminder Cotton When Tested As Per Specification No. IS: 3416-1988. Mass Of Background Material Shall Be 190 To 200g/m2) When Tested As Per Specification No. IS: 1964-1970 R.A. 1988. The Basic Fabric Shall Meet All The Requirements Of Specification No. EN 471-2003 +A1:2007. Cotton Yarn Used In The Weft Need Not Be Dyed. | Yes |
| "SEWING THREAD:- 100% Spun Polyester 3 Ply Sewing Thread Of Matching Colour Of Best Trade Quality Shall Be Used For Stitching." | Yes |
| Patch Pocket Confirmity To EN Standard Size | 15 x 15 cm |
| Marking Depaertmental Identifications (micro Prismatic Material) For Front | 15 x 5 cm |
| Marking Depaertmental Identifications (micro Prismatic Material) For Back | 20 x 15 cm |
| Marking Departmental Identifications (micro Prismatic Material) In Case Of Coverall, Bib And Brtaze Trouser | 30 x 5 cm |
| Area Of Back Ground Material For Front/back Side | 50/50 % |
| Total Area Of Back Ground Material Front Plus Back As Per EN 471:2003 | 0.8 / 0.5 sq. mtr |
| Area Of Retro Reflective Material - Front/back Side | 50/50 % |
| Total Area Of Retro Reflective Material Front / Back As Per EN 471:2003 | 0.20 / 0.13 sq. mtr |
| Ends Per Inch And Picks Per Inch Of Background Material | .02 |
| Chromaticity Co-ordinates And Luminous Factor Of Background Material As Per Table 2 Of EN 471-2003 | Yes |
| Chromaticity Co-ordinates And Luminous Factor Of Background Material After Exposure To Xenon Arc Lamp As Per Table 2 Of EN 471-2003 | Yes |
| HIGH GLOW RETROREFLECTIVE MATERIAL:- Micro Prismatic Material Of 50 Mm Wide Band Of New Material Conforming To EN 471-2003 + A1:2007 Shall Be Used. The Supply Shall Confirm To The Requirements Of Level 2 Of Separate Performance Material Confirming To Table 4 Of EN471:2003 +A1:2007 | Yes |
| FASTENERS For High Visibility Warning Garments With Synthetic Slide Fasters: For Jacket & Waist Coat The Same Shall Be Heavy Open Ended Flat Auto Lock Type. | Yes |
| Fastners For Hiigh Visibiloity Warning Garments With Syntehtic Hook And Loo0p Fasterr: Synthetic Hook & Loop Fastners 50 Mm Wide Tape Conforming To Specification No. IS: 8156 (RA 2004) Type I Shall Be Used. Minimum 3 Such Tapes Of 3 Cm Length Shall Be Fixed At Euqal Intervals In Respect Of Waist Coat And For Harness The Same Shall Be Single Piece Of 3 Cm Length. | Yes |
| The Garment Shall Provide 360 Degree Visibility | Yes |
| Retro Reflective Tape Shall Be Micro Prismatic Type, White Or Silver Colour Certified By The Manufacturer Of Retro Reflective Material. | Yes |
| There Shall Be No Joints At Face And Back Of The Garment Either On Background Material Or On Reflective Material. | Yes |
| Width Of Retro Reflective Material For All Types Of Garments | 50 mm |
| Piping Shall Be Given Using Self Material Of Background Cloth | Yes |
| FABRICATION | PVC |
| The Test Certficate Of Retroreflective Tapes Certified By The Manufacturer Or Any International Laboratory Shall Be Provided To Buyer On Demand.The Retro Reflective Material Should Be Certified By The Manufacturer To Withstand 75 Wash Cycles @ 60 Degree C And For Temperature Variation Test. | Yes |
| Manufacturers Test Certificate For Synthetic (Plastic) Slide Fastners Or Synthetic Hook And Loop Fastners Used In The Garment Shall Be Provided To Buyer On Demand. | Yes |
| Manufactures Test Report For Reflective Material Used For Printing Of Departmental Identity To Specification No. EN 13356-2001 High Visibility Accessories For Nonprofessinal Use Shall Be Provided To Buyer On Demand. | Yes |
| General Marking : Each Piece Of Warning Garment Shall Be Marked By Providing A Cloth Label Attached / Affixed To The Garment. The Label Shall Be Visible,legible And Durable Up To 75 Cycles Of Washing. The Marking Shall Be In Black On White Background Either Woven Or Printed. | Yes |
| Specific Marking. The Marking Shall Include The Following Information: Name Or Trade Mark Of The Manufacturer,Designation Of The Product, Class, Size Of Garment Level Of Performance And Specification No. | Yes. |
| Care Labeling: - Cleaning Washing Instructions Shall Be Indicated Either In Hindi Or English By Providing A Care Label. Maximum No. Of Process Shall Be Stated After The Word "Max" User Of The Garment Being Working Class Who Are Comparatively Less Educated, Where Ever Possible Symbols May Be Used In Care Labels.(Basic Symbols Are Washtub, Triangle, Iron,circle And Circle Inside A Square). | Yes |
| Packing : Each Piece Will Be Packed In Button Down Poly Bags Of 200 GSM And 50 Such Pieces To Be Packed In Corrugated Carton Boxes Of 6 Ply With 160 GSM Top Duplex Board. | Yes |
| Marking Required For The Identification Of The User Department, On Front And Back Of Garment. AND Requirement Of Patch Pocket In The Garment As Required For Each Garement Shall Be Ordered SeparatelyFabricator Will Have To Stitch The Same In To The Garment. | Yes. |
| Purchase Document For Co-relating The Luminous Material And Background Material Used In The Manufacturing Of The Supply Shall Be Maintained By Manufacturer And Same Shall Be Provided To Buyer On Demand. | Yes |
| Test Certificate Of Retro Reflective Tapes Certified By The Manufacturer Or Any International Laboratory Certifying That The Reflective Tape Confirms To EN 471-2003+A1:2007 Shall Be Provided To Buyer On Demand. Test Certificate Should Specifically Mention About The Batch/Lot Number And Manufacturers Marking And Product Code On It. | Yes |
| Test Reports To Be Provided To Buyer On Demand | Yes |
Price Dekho Price List in india© 2018 GeM All rights reserved.
