DescriptionAn oscilloscope or as it is widely known, CRO cathode-ray oscilloscope, is a type of an electronic test instrument that allows observation of constantly varying signal voltages. It also allows other signals such as sound or vibrations to be converted into voltages that are displayed for readings.APPLICATIONAn oscilloscope can be used to observe the changes of an electrical signal over time. This observed waveform can be analyzed for several properties such as amplitude, frequency, time interval and distortion.MetroQ have been serving the industry of testing equipments for over 5 decades now. And with their SDS-5032E they have stepped into the manufacturing of Digital storage oscilloscope DSO. This DSO is equipped with the best in-line features that ensures an unmatched performance.FEATURESStorage the principal advantage of using a digital storage oscilloscope over an analogue model is that it enables storage of the readings and the measurements. This fe.
Other Specifications Download Specification | |
---|---|
Type | Digital |
Operating System | Non -Windows |
Bandwidth Upgradability | Yes |
No. Of Analog Channels | 2 Number |
Digital Channels | Yes |
No. Of Digital Channels | 8 Number |
Record Length Per Digital Channel Simultaneously | 14ns GS/sec |
Sampling Rate Per Digital Channel Simultaneously | NA Mega Points |
Min. Detectable Pulse Width | 4ns/div 100s/div ns |
Memory Upgradability | Yes |
Segmented Memory Feature Availability | Yes |
Vertical Sensitivity | 500mV per Div to 10 V/div |
Vertical Resolution | 8 bits |
Coupling | AC,DC,Ground |
Time Base Range | 4ns/div 100s/div |
Trigger Types | Edge, Pulse, Alternate, Internal, External |
Measurements | Add, Subtract, Maths, FFT |
Frequency Analysis Feature | Yes |
In-built Frequency Counter | Yes |
In-built Function Generator | Yes |
Acquisition Modes | Normal, Peak |
Display Type | Monochrome |
Display Size | 17.78 CM CM |
I/O Interface | USB |
Standard Accessories To Be Supplied | Probes 2 Nos., Power Chord |
Operating Temperature Range | 40 Deg. C Degree C Degree C |
Operating Humidity (RH) | 90 % |
Power Supply | 230V +- 10 , 50Hz |
Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : 1. Dry Heat Test : 45 Deg C For 16 Hours As Per IS:9000/Pt.3/sec.5/1977 (reaffirmed In 2007) 2. Cold Test : 0 Deg C For 4 Hours As Per IS:9000/Pt.2/sec.4/1977 (reaffirmed In 2007) 3. Damp Heat Test: 95% RH At 40 Deg C, Two Cycles Of 24 Hours Each Separated By A Gap Of 4 Hours As Per IS:9000/Pt.5/sec. 1/1991 (reaffirmed In 2007) The Oscilloscopes Shall Be Checked Functionally Before And After Recovery Period Of 1-2 Hours Of The The Environmental Test Sequence As Above. Functional Tests Shall Include Switching ON And Calibration | yes |
Test Report No. | 12145 |
Test Report Date | 16/3/2018 |
Name Of The Lab | BTC Instruments |
Warranty | 1 Year |
Real Time Bandwidth | 30 MHz |
Record Length Per Analog Channel Simultaneously | 250MS/s Mega Point |
Sample Rate Per Analog Channel Simultaneously | 250MS/s GS/sec |
Waveform Update Rate | 15 Wave Forms Waveforms/ |
Time Base Accuracy | 0.05 PPM |