1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
This is fully touch screen POS with Aadhaar base Fingerprint reader. Its having inbuilt Mag-strip reader, Chip card reader, Smart card reader, receipt printer, QR code reader and optional Aadhaar enable fingerprint reader and Laser bar-code reader . We can use this terminal as for Aadhaar authentication and KYC usage ,e-Callahan , card payments , Hotel management , applicable on desk payment options with billing for various types of shops and marts , device can remotely used for outdoor purpose , ticketing purpose in rail, buses etc. Its fully touchscreen , easy to use as Android based , user can get reports on screen also. This certified by BIS, PCI , EMV L1, L2, RoHs, IP65, STQC..
| Other Specifications Download Specification | |
|---|---|
| Display Size | 5.5 Inch |
| Display Type | Colour TFT |
| Display Resolution | 1280X720 Pixels |
| Backlight | LED Backlight |
| Light Immunity | Clear Visibility and legibility under direct sunlight |
| Processor | Dual Core or higher ARM |
| Processor Speed | 1.2 GHz |
| Operating System | Android 4.0 or higher |
| RAM | 1024 MB |
| Inbuilt Storage (Flash Memory) | 1 or higher GB |
| Storage Expandability Through Micro SD Card | 8 GB |
| Integrated QRcode/ Barcode Reader | Available |
| Scanning Speed Of QRcode/ Barcode Reader | 2scans/sec Scans/sec |
| Camera (for Reading QRcode/ Barcode) | Available |
| Camera Resolution | Minimum 5 Mega Pixel with Flash pixels |
| Key Pad | Hard alphanumeric |
| Interface | USB 2.0 or higher |
| WI-fi Connectivity | Available |
| Bluetooth Connectivity | Available |
| GPS Connectivity | Available |
| GSM SIM Slot | Available |
| No. Of SIM Available | Single SIM with 4G |
| SAM Slot | Available |
| Built-in Speaker | Available |
| In Built Debit /Credit Card Reader | Available |
| In Built Debit /Credit Card Reader Specification | Inbuilt IC Card and MSR Card Supported with PCI 4.0 or higher Compliance and EMV (Europay, MasterCard and VISA) L1 & L2 Certification |
| In Built Contact Smart Card Reader/Writer | Available |
| In Built Contact Smart Card Reader/Writer | Inbuilt Minimum 1 number of contact type smart card reader (SCOSTA Compliant) |
| Integrated Printer | Minimum 2 thermal / Dot Matrix Printer integrated with hand held device |
| Software Development Kit (SDK) | Appropriate SDK need to be provided along with device |
| Inbuilt Finger Print Scanner | Available |
| Inbuilt Finger Print Scanner Specification | Aadhaar enabled In-built finger print scanner with latest certification. UIDAI/STQC certified finger print sensor and Scratch resistant sensor surface |
| Battery Chemistry | Lithium Ion |
| Battery Capacity | 7.4v22000MaH mAH |
| Battery Back Up (Device In Operation While All Function Of Device Active) | Minimum 6 Hour |
| Connectivity (presence/absence) Indicator | Available |
| Signal Strength Indicator | Available |
| Battery Status Indicator | Available |
| Accessories To Be Supplied With The Equipment | Supply Carrying case and User manual along with the devices. |
| Terminal Management | Device is remotely manageable in secured mode through functionality like MDM |
| Certifications Required | CE,RoHS,BIS,PCI |
| Environmental Resistance (IP Rating) | Available |
| If Available, Environmental Resistance ( IP 54 Or Better) | ip67 |
| Drop /Free Fall Test | Drop /Free Fall test in unpacked, switched off and normal handling conditions (Height: 1.2 m , Total No. of falls:2) |
| Vibration Test | Vibration Test should be in packed condition, switched off condition (10-150Hz, 0.15mm/2g, 10 sweep , cycles/axes) |
| Bump Test | Bump test should be in packed condition, switched off condition. (1000 Bumps, 40g, in vertical position |
| Operating Temperature Range | -10 to +50 degree Celsius Degree C |
| Operating Humidity | 10 90 noncondensing % |
| Dimensions (H X W X L) | 57x76x210 mmxmmxmm |
| Weight | 480 gms |
| BIS Registration No. Under Compulsory Registration Scheme & Its Validity | R-41071447 |
| Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : (a) Dry Heat : For 16 Hrs. At A Temp. Of 55 Degree C In Accordance With IS:9000/part-3/section-5/1977 (reaffirmed In 2007). (b) Cold Test : For 4 Hrs. At A Temp. Of -10 Degree C In Accordance With IS:9000/part-2/section-4/1977 (reaffirmed In 2007). (c) Damp Heat (Cyclic)Test : For 2 Cycles Of 24 H Each At A Temp. Of 40 Degree C & 95% RH In Accordance With IS:9000/part-5/section-1/ 1991 (reaffirmed In 2007). After Environmental Conditioning Sequence As Above And A Recovery Period Of Two Hours, The Instrument Shall Be Checked For Complete Functional Parameters, Which Should Be With In Limits Including 1:1 Authentication (Test Reports Are To Be Furnished When Demanded By Buyer) | Yes |
| Test Report No. | R-41071447 |
| Test Report Date | 21-8-2017 |
| Name Of The Lab | BIS |
| Warranty | 1 Year |
Price Dekho Price List in india© 2018 GeM All rights reserved.
