1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
TRUCK MOUNTED COMBINED SUCTION CUM JETTING MACHINES - 8000 LTRS Where Material of Tank is SS-304..
| Other Specifications Download Specification | |
|---|---|
| Chassis Certification ARAI/VRDE/ICAT | Yes |
| Form 22 A - For Compliance With Pollution Standards, Safety Standards Of Components And Road Worthiness As Per CMVR Rules. | Yes |
| Conforming To IS:13496 For Suction Machine For Cleaning Sewers. Manholes And Ancillary Structures Provided On Sewer Line And Closed Storm Water Drains. | Yes |
| Conforming To IS:11387 For High Pressure Jetting Machine For Sewer Cleaning. | Yes |
| Registration To Local RTO (Regional Transport Office)/RTA(Regional Transport Authority) By Seller | Yes |
| NGT Approval Needs To Be Provided By The Govt. Department | Yes |
| Availability Of Test Reports For All Critical Components From The Manufacturer Or OEM Of Jetting Pumps, Vacuum Pumps, Power Takeoff Unit, Jetting Hose Etc. Shall Be From Any ILAC /NABL Accredited / Central Govt. Lab To Be Furnished To Buyers On Demand. | Yes |
| Chassis Model Number | TATA LPT1613/42 BSIV |
| Chassis Type | Heavy Motor Vehicle |
| Type Of Fuel | Diesel |
| Chassis Gross Vehicle Weight | 16200 Kg |
| Kerb Weight | 4490 Kg |
| Engine Capacity | 5675 cc |
| Pay Load Capacity | 11 Tonne Load |
| Vehicle Emission Compliance | BS-IV |
| Engine BHP | 134 HP |
| Engine Torque Max@rpm (Engine Torque Max@rpm) | 490 N-M@rpm |
| Maximum Speed Of Vehicle | 80 Kmph |
| No. Of Speed/ Forward Gears | 6 |
| Braking Distance | 5 metre |
| Gradeability Of Vehicle | 23 % |
| Wheel Base | 4225 mm |
| Engine Aspiration SystemTurbocharged Intercooler | Turbocharged Intercooler |
| Mount Type | Truck Mounted Unit |
| Fuel Tank Capacity | 225 Litre |
| Split Shaft PTO Of The Vehicle | 400 kgm |
| Derrick Arm Available | Yes |
| Type Of Cooling | WATER COOLED |
| Vacuum Pump Flow | 660 cu.m/hr |
| Vacuum Pump Power | 18.4 hp @ rpm |
| Vacuum Relief Valve Size | 3 inch |
| Vacuum Suction Depth | 9 metre |
| Suction Hose - Lightweight, Heavy Duty ,reinforced ,PVC Along With Quick Connect Coupling Arrangement | Yes |
| Suction Hose Internal Diameter | 100 mm |
| Suction Hose Length | 3 metre |
| Number Of Suction Hose | 5 |
| Safety Equipment | YES |
| Silencer/ Filter(Micro Strainer) | Yes |
| Exhaust Silencer And Injection Cooling Air Inlet Silencer/ Filter | Yes |
| Blower Outlet And Air- Exhaust Silencer | Yes |
| Check Valve | Yes |
| Vacuum Limitation Valve | Yes |
| Drain Off Valve | Yes |
| High Pressure Jetting Pump With Pressure Regulating Arrangement | yes |
| Jetting Pump - Triplex Plunger Reciprocating Pump | Yes |
| Working Range Of Jetting Pump | 150 bar |
| Water Flow For Pump Of Jetting Machine | 260 LPM |
| Pressure Relief Valve Size | 1.5 inch |
| Jetting Hose Inner Diameter (Capable Of Withstanding 1.5 Times The Maximum Pressure Generated By The Pump) | 25 mm |
| Number Of Nozzles For Removing Blockage (Conical Head) | 1 |
| Number Of Nozzles For Flushing Sewer Lines (Round Head) | 1 |
| Number Of Balanced Nozzles For Dry Silt | 1 |
| Water Storage Tank Capacity | 5000 Litres |
| Sludge Storage Tank Capacity | 3000 Litres |
| Total Tank Capacity | 8000 Litres |
| Maximum Working Pressure Of Jetting Hose | 206.8 Bar |
| Minimum Burst Pressure Of Jetting Hose | 517.1 Bar |
| Thickness Of Tank Plate Minimum 6 (mm) Of SS 304 With Proper Reinforcement To Withstand The Required Forces.. | 6 mm |
| Material Of Tank - Steel Of Grade SS-304 | Yes |
| Surface Preparation And Finish Of Tank's Exterior - Sanded Prior To Spray Painting And Spray Painted With Two Coats Of Superior Quality Anti Corrosive Primer And Two Coats Of Enamel Metal Paint | Yes |
| Chassis Certification ARAI/VRDE/ICAT No. | AAFN 0260 |
| Overall Length | 7730 mm |
| Overall Width | 2440 mm |
| Equipment Length | 5600 mm |
| Equipment Height | 3440 mm |
| Equipment Rear Over Hang | 2490 mm |
| Type Of Front Axle And Suspension System | Extra heavy duty forged I beam Reverse Elliot type and Semi-elliptical leaf springs |
| Type Of Rear Axle And Suspension System | Single reduction, Extra Heavy duty,Hypoid gears, Fully floating axle shafts and Semi-elliptical leaf springs |
| Surface Preparation And Finish Of Tank's Interior - Clean Water Two Coats Anti Corrosive Primer & Two Coats Of Grey Enamel Paint & Sludge Shall Be With Two Coats Of Epoxy Paint To Resist Corrosion | Yes |
| Provision For Locking And Unlocking Arrangement Of Rear Gate Of Tank, To Be Operated Hydraulically For Quick Tipping And Cleaning. | Yes |
| Hose Reel Drive Operated By Hydraulic Motor | Yes |
| Dished Head | Yes |
| Tank Rear Door Opening By Hydraulic System | Yes |
| Reinforcement Rings In Pipes | Yes |
| Hydraulic Pump Type | Gear type |
| Water Level Indicator Type (with Safety Coverage) | YES |
| Water Level Indicator Nos. | 2 |
| Thickness Of Cover For Engine, Pump And Hose Reel Compartment | 3 mm |
| Material Of Cover For Engine, Pump And Hose Reel Compartment | MS sheet |
| Full Bore Quick Acting Valves In The Sewage Path. | Yes |
| Air Pumps To Safeguard The Pump From Overloading. | Yes |
| Sludge Trap Between The Air Pump And The Tank | Yes |
| Float Cut Out Valve To Seal The Pump Suction Line | Yes |
| Lubricating System For Reducing Friction Loss | Yes |
| Three Sewer Cleaning Nozzles With Varying Rearward Angles | Yes |
| One Nozzle Extension For Easy Fixing Of The Hose And The Nozzle | Yes |
| Two Stop Tank Strainer Elements | Yes |
| Two Sets Of Operation And Service Manuals And Spare Parts Lists | Yes |
| Hose Guide | Yes |
| Counter | Yes |
| Four Reels Of Hose Pipe, Each Of 100m Length | Yes |
| Set Of Spares For 3 Year Operation | Yes |
| Warranty Time | 24 Months |
| Warranty Distance | 10000 km |
| No. Of Free Service (with Consumable) | 6 |
| Make And Model Of Vehicle Chassis | TATA LPT1613/42 BSIV |
| Make And Model Of Vacuum Pump | JUROP SPA ITALY/BATTIONNI(ITALY) / GARDENER DENVER (USA) MASPORT, (USA) / MORO(ITALY) |
| Make And Model Of Jetting Pump | Pratissoli/WOMA(Germany)/Hammelman HPP(ITALY)/ MYERS(USA)/SPECK(ITALY)/ TPS or any other equivalent make |
| Make And Model Of Jetting Hose | Thermoplastic of Polyhose/Parker/Aeroquip/Piranha or any equivalents |
| Make And Model Of P.T.O. | TATA/VAS/PZB,ITALY/OMSI,ITALY or equivalent |
| Make And Model Of Hydraulic Motor | M+S/ DYNAMATIC OR EQUIVALENT |
| Make And Model Of Hydraulic Pump | DYNAMATIC OR EQUIVALENT |
| Make And Model Of Suction Hose | DUTRON/KANAFLEX OR EQUIVALENT |
| Make And Model Of Jetting Nose | NOVA CONTEC OR EQUIVALENT |
| Chassis Make And Model | TATA LPT1613/42 BSIV |
| Comprehensive Operation And Maintenance During First Yeas Warrenty Period For 8 Hours Shift, 26 Working Days In A Month (One -driver, 02-helper Along With Vehicle And Maintenance/admin/managerial Staff As Per Requirement) | Yes |
| Vacuum Pump - Rotary Vane / Sliding Vane | Yes |
Price Dekho Price List in india© 2018 GeM All rights reserved.
