1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
Jetting Cum Sewer Suction Machine Capacity 8000 Litter Mounted On TATA 1613 LPT Use For Public Work Sludge/Sewer Water With 1 Year Comprehensive Operation. The HCV Mounted Sewer Line Cleaning Jetting Cum Suction Machine Of 8000 Litres Capacity Use Public Work Machinery This Is Then Collected Into The Tank By Operating The System In Vacuum Mode. It Should Consist Of A Twin Compartment Separately For Jetting As Well As Suction, Cylindrical Cross Section Tank Having A Volume Tic Capacity Of 5000 Litres For Fresh Water And 3000 Litres For Sludge/Sewer Water. The Complete Equipment Should Be Mounted On A Vehicle Chassis Of GVW Not Less Than 16 Tons, And A Horsepower Rating Of Not Less Than 136 HP With Side PTO Provision. PTO Will Be Used For All Required Operations Of Equipment..
| Other Specifications Download Specification | |
|---|---|
| Chassis Certification ARAI/VRDE/ICAT | Yes |
| Form 22 A - For Compliance With Pollution Standards, Safety Standards Of Components And Road Worthiness As Per CMVR Rules. | Yes |
| Conforming To IS:13496 For Suction Machine For Cleaning Sewers. Manholes And Ancillary Structures Provided On Sewer Line And Closed Storm Water Drains. | Yes |
| Conforming To IS:11387 For High Pressure Jetting Machine For Sewer Cleaning. | Yes |
| Registration To Local RTO (Regional Transport Office)/RTA(Regional Transport Authority) By Seller | Yes |
| NGT Approval Needs To Be Provided By The Govt. Department | Yes |
| Availability Of Test Reports For All Critical Components From The Manufacturer Or OEM Of Jetting Pumps, Vacuum Pumps, Power Takeoff Unit, Jetting Hose Etc. Shall Be From Any ILAC /NABL Accredited / Central Govt. Lab To Be Furnished To Buyers On Demand. | Yes |
| Chassis Model Number | LPT 1613 |
| Chassis Type | Heavy Motor Vehicle |
| Type Of Fuel | Diesel |
| Chassis Gross Vehicle Weight | 16000 Kg |
| Kerb Weight | 4000 Kg |
| Engine Capacity | 5675 cc |
| Pay Load Capacity | 16 ton Tonne Load |
| Vehicle Emission Compliance | BS-IV |
| Engine BHP | 136 HP |
| Engine Torque Max@rpm (Engine Torque Max@rpm) | 136 Bhp 2400 Rpm N-M@rpm |
| Maximum Speed Of Vehicle | 490 Nm 1400 Rpm Kmph |
| No. Of Speed/ Forward Gears | 6 |
| Braking Distance | 0 metre |
| Gradeability Of Vehicle | 23 % |
| Wheel Base | 4225 mm |
| Engine Aspiration SystemTurbocharged Intercooler | Turbocharged Intercooler |
| Mount Type | Truck Mounted Unit |
| Fuel Tank Capacity | 225 Litre |
| Split Shaft PTO Of The Vehicle | 400 kgm |
| Derrick Arm Available | Yes |
| Type Of Cooling | Injection Air Cooling System |
| Vacuum Pump Flow | 540 cu.m/hr |
| Vacuum Pump Power | 15.2 hp @ rpm |
| Vacuum Relief Valve Size | 1.5 inch |
| Vacuum Suction Depth | 8 metre |
| Suction Hose - Lightweight, Heavy Duty ,reinforced ,PVC Along With Quick Connect Coupling Arrangement | Yes |
| Suction Hose Internal Diameter | 100 mm |
| Suction Hose Length | 3 metre |
| Number Of Suction Hose | 5 |
| Safety Equipment | Pressure Relief Valve/Vacuum Safety Valve |
| Silencer/ Filter(Micro Strainer) | Yes |
| Exhaust Silencer And Injection Cooling Air Inlet Silencer/ Filter | Yes |
| Blower Outlet And Air- Exhaust Silencer | Yes |
| Check Valve | Yes |
| Vacuum Limitation Valve | Yes |
| Drain Off Valve | Yes |
| High Pressure Jetting Pump With Pressure Regulating Arrangement | yes |
| Jetting Pump - Triplex Plunger Reciprocating Pump | Yes |
| Working Range Of Jetting Pump | 150 bar |
| Water Flow For Pump Of Jetting Machine | 260 LPM |
| Pressure Relief Valve Size | 2.0 inch |
| Jetting Hose Inner Diameter (Capable Of Withstanding 1.5 Times The Maximum Pressure Generated By The Pump) | 25 mm |
| Number Of Nozzles For Removing Blockage (Conical Head) | 1 |
| Number Of Nozzles For Flushing Sewer Lines (Round Head) | 1 |
| Number Of Balanced Nozzles For Dry Silt | 1 |
| Water Storage Tank Capacity | 5000 Litres |
| Sludge Storage Tank Capacity | 3000 Litres |
| Total Tank Capacity | 8000 Litres |
| Maximum Working Pressure Of Jetting Hose | 206 Bar |
| Minimum Burst Pressure Of Jetting Hose | 517 Bar |
| Thickness Of Tank Plate Minimum 6 (mm) Of SS 304 With Proper Reinforcement To Withstand The Required Forces.. | 6 mm |
| Material Of Tank - Steel Of Grade SS-304 | Yes |
| Surface Preparation And Finish Of Tank's Exterior - Sanded Prior To Spray Painting And Spray Painted With Two Coats Of Superior Quality Anti Corrosive Primer And Two Coats Of Enamel Metal Paint | Yes |
| Chassis Certification ARAI/VRDE/ICAT No. | AAHN0151 F03 Dtd. 17-02-2017 |
| Overall Length | 7380 mm |
| Overall Width | 2325 mm |
| Equipment Length | 4800 mm |
| Equipment Height | 1400 mm |
| Equipment Rear Over Hang | 625 mm |
| Type Of Front Axle And Suspension System | Front: 10 X 20 - 16 PR |
| Type Of Rear Axle And Suspension System | Rear: 10 X 20 - 16 PR |
| Surface Preparation And Finish Of Tank's Interior - Clean Water Two Coats Anti Corrosive Primer & Two Coats Of Grey Enamel Paint & Sludge Shall Be With Two Coats Of Epoxy Paint To Resist Corrosion | Yes |
| Provision For Locking And Unlocking Arrangement Of Rear Gate Of Tank, To Be Operated Hydraulically For Quick Tipping And Cleaning. | Yes |
| Hose Reel Drive Operated By Hydraulic Motor | Yes |
| Dished Head | Yes |
| Tank Rear Door Opening By Hydraulic System | Yes |
| Reinforcement Rings In Pipes | Yes |
| Hydraulic Pump Type | Gear type |
| Water Level Indicator Type (with Safety Coverage) | Acrylic Glass Type |
| Water Level Indicator Nos. | 2 |
| Thickness Of Cover For Engine, Pump And Hose Reel Compartment | 3 mm |
| Material Of Cover For Engine, Pump And Hose Reel Compartment | Galvanized Iron Sheet |
| Full Bore Quick Acting Valves In The Sewage Path. | Yes |
| Air Pumps To Safeguard The Pump From Overloading. | Yes |
| Sludge Trap Between The Air Pump And The Tank | Yes |
| Float Cut Out Valve To Seal The Pump Suction Line | Yes |
| Lubricating System For Reducing Friction Loss | Yes |
| Three Sewer Cleaning Nozzles With Varying Rearward Angles | Yes |
| One Nozzle Extension For Easy Fixing Of The Hose And The Nozzle | Yes |
| Two Stop Tank Strainer Elements | Yes |
| Two Sets Of Operation And Service Manuals And Spare Parts Lists | Yes |
| Hose Guide | Yes |
| Counter | Yes |
| Four Reels Of Hose Pipe, Each Of 100m Length | Yes |
| Set Of Spares For 3 Year Operation | Yes |
| Warranty Time | 24 Months |
| Warranty Distance | 50000 km |
| No. Of Free Service (with Consumable) | 6 |
| Make And Model Of Vehicle Chassis | Tata LPT 1613 TCIC BS4 |
| Make And Model Of Vacuum Pump | Indian Make |
| Make And Model Of Jetting Pump | HAWK/Indian Make |
| Make And Model Of Jetting Hose | Parker usa/action/Equivalent Reputed make |
| Make And Model Of P.T.O. | Indian Make |
| Make And Model Of Hydraulic Motor | Hi-Tech/Dayna/action/indian make |
| Make And Model Of Hydraulic Pump | dental/wipro/action/euivalent reputed make |
| Make And Model Of Suction Hose | dupont/equivalent reputed make |
| Make And Model Of Jetting Nose | ms nuova cont/action/indian make |
| Chassis Make And Model | TATA LPT 1613 BS IV |
| Comprehensive Operation And Maintenance During First Yeas Warrenty Period For 8 Hours Shift, 26 Working Days In A Month (One -driver, 02-helper Along With Vehicle And Maintenance/admin/managerial Staff As Per Requirement) | Yes |
| Vacuum Pump - Rotary Vane / Sliding Vane | Yes |
Price Dekho Price List in india© 2018 GeM All rights reserved.
