1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
TRUCK MOUNTED SUPER SUCKER MACHINE ACCOMODATING 3 NO. SUCTION DUMP TANK, 1 NO. WATER TANK AND 1 NO. CRANE WITH TIPPER.
| Other Specifications Download Specification | |
|---|---|
| Complete Equipment ARAI/VRDE/ICAT Certification | Yes |
| If Yes, Please Mention ARAI/VRDE/ICAT No. | WILL PROVIDE |
| Chassis Certification ARAI/VRDE/ICAT | Yes |
| Chassis Certification ARAI/VRDE/ICAT No. | AAKN0054 |
| Form 22 A - For Compliance With Pollution Standards, Safety Standards Of Components And Road Worthiness As Per CMVR Rules. | Yes |
| Conforming To IS:13496 For Suction Machine For Cleaning Sewers. Manholes And Ancillary Structures Provided On Sewer Line And Closed Storm Water Drains. | Yes |
| Conforming To IS:11387 For High Pressure Jetting Machine For Sewer Cleaning. | Yes |
| Availability Of Test Reports For All Critical Components From The Manufacturer Or OEM Of Jetting Pumps, Vacuum Pumps, Power Takeoff Unit, Jetting Hose Etc. Shall Be From Any ILAC /NABL Accredited / Central Govt. Lab, To Be Furnished To Buyers On Demand. | Yes |
| Chassis Make And Model For Main Unit | MAN CLA 25.300 6X4 BSIV 9S WB 5300 mm |
| Chassis Model Number | MAN CLA 25.300 6X4 BSIV 9S WB 5300 mm |
| Chassis Type | Heavy Motor Vehicle |
| Type Of Fuel | Diesel |
| Chassis Gross Vehicle Weight | 25000 kg |
| Kerb Weight | 7000 kg |
| Engine Capacity | 6800 cc |
| Pay Load Capacity | 18 tonne load |
| Vehicle Emission Complaince | BS IV |
| Engine Torque Max@rpm | 1150 N-M@rpm |
| Gradeability Of Vehicle | 1st Gear - 43.15 % |
| Wheel Base | 5300 mm |
| Engine Aspiration System | Turbocharged Intercooler |
| Mount Type | Truck Mounted Unit |
| PTO Arrangement | Yes |
| Fuel Tank Capacity | 300 Litre |
| Split Shaft PTO Torque Of The Vehicle | 1800 kgm |
| Overall Length Of The Vehicle | 10101 mm |
| Overall Width Of The Vehicle | 2500 mm |
| Equipment Length | 6000 mm |
| Equipment Height | 2432 mm |
| Equipment Rear Over Hang | No |
| If Yes Please Mention The Extracted Length | 00 mm |
| Type Of Front Axle And Suspension System | MAN HEAVY DUTY FM08 DROP FORGED TYPE |
| Type Of Rear Axle And Suspension System | MAN H9 & HD9 13120 PLANETARY HUB REDUCTION |
| Vacuum Generation Plant | Yes |
| Air Mover - Air Cooled And Vacuum Blower | Yes |
| Vacuum Generation Drive System - Hydraulic Pump And Motor | Yes |
| Air-Material Separation System - Cyclone Separator | Yes |
| Vacuum Blower | Yes |
| Free Air Flow Rating | 6500 m3/hr |
| Vacuum Suction Depth | 8 metre |
| Rated Vacuum Of Blower | 9000 mm of water column (WC) |
| Vacuum Pump Power | 750 milli bar |
| Minimum Operating Pressure | 500 milli bar |
| Vacuum Relief Valve Size | 3 inch |
| Suction Hose Type - Lightweight, Heavy Duty, Reinforced, PVC | Yes |
| Suction Hose Internal Diameter | 152.4 mm |
| Suction Hose Length | 5 metre |
| Number Of Suction Hose | 3 Nos. |
| Silencer/ Filter(Micro Strainer) | Yes |
| Exhaust Silencer And Injection Cooling Air Inlet Silencer/ Filter | Yes |
| Blower Outlet And Air- Exhaust Silencer | Yes |
| Check Valve | Yes |
| Vacuum Limitation Valve | Yes |
| Discharge Pipe Diameter | 150 mm |
| Discharge Capacity Of The Tank | 250 LPM |
| Drain Off Valve | Yes |
| High Pressure Jetting Pump With Pressure Regulating Arrangement | Yes |
| Pressure Range Of Jetting Pump | 150 bar |
| Water Flow For Pump Of Jetting Machine | 406 LPM |
| Pressure Relief Valve Size | 3 inch |
| Jetting Hose Diameter (Capable Of Withstanding 1.5 Times The Maximum Pressure Generated By The Pump) | 31.75 mm |
| Number Of Nozzles For Removing Blockage (Conical Head) | 1 |
| Number Of Nozzles For Flushing Sewer Lines( Round Head) | 1 |
| Water Storage Tank Capacity | 4000 Litres |
| Thickness Of Water Tank Plate(Conforming To IS:2062 Grade-A) | 3 mm |
| Material Of Water Tank With Material Grade | SS:304 |
| Surface Preparation And Finish Of Equipment's Exterior | SPRAY PAINTED |
| Surface Preparation And Finish Of Tank's Interior | SPRAY PAINTED |
| The Locking And Unlocking Arrangementof The Rear Gate Of The Tank To Be Operated Pneumatic/ Hydraulically For Quick Tipping And Cleaning. | Yes |
| Hose Reel Drive Available | Yes |
| Hose Reel Type | ROTATE TYPE |
| Hose Reel Diameter | 500 mm |
| Dished Head | Yes |
| Primary Shutoff Device Available | Yes |
| Reinforcement Rings In Pipes | Yes |
| Shut Off Valve Diameter | 50 mm |
| Hydraulic Pump Type | AS PER REQUIREMENT |
| Hydraulic Pump Drive | CHASSIS SIDE PTO |
| Hydraulic Pump Displacement | 125.9 cc/rev or rpm |
| Pump Operational Time | 30 minutes |
| Water Level Indicator Type | TUBE TYPE |
| Water Level Indicator Nos. | 2 Nos. |
| Thickness Of Cover For Engine, Pump And Hose Reel Compartment | 3 mm |
| Material Of Cover For Engine, Pump And Hose Reel Compartment | Galvanised Iron Sheet |
| NGT Approval Needs To Be Provided By The Govt. Department | Yes |
| Registration To Local RTO(Regional Transport Office)/RTA(Regional Transport Authority) By Seller | Yes |
| Make And Model Of Centrifugal Pump | AVNI/BE PUMPS/KSB/KBL/EQUIVALENT |
| Make And Model Of Suction Hose | DUTRON KANAFLEX/JYOTIFLEX/EQUIVALENT |
| Make And Model Of Quick Release Couplings | JUROP AND IMPORTED EQUIVALENT MAKE |
| Make And Model Of Water Filter | JAIN OR EQUIVALENT MAKE |
| Make And Model Of Jetting Pump | PRATISSOLI SPA MK-65 (IMPORTED) OR EQUIVALENT MAKE |
| Make And Model Of Hydraulic Pump | BOSS/CASAPPA/DOWTY/HAWE/KAWASAKI/EQUIVALENT |
| Make And Model Of Gun | IPH ITALY/EQUIVALENT |
| Make And Model Of Hydraulic Cylinders | CANARA/DANTAL/WIPRO/EQUIVALENT |
| Make And Model Of Blower | JUROP,ITALY SPA PVT-1000(IMORTED)/EQUIVALENT |
| Make And Model Of Suction Hose | DUTRON KANAFLEX/JYOTIFLEX/EQUIVALENT |
| Make And Model Of Hydraulic Motors | CASAPPA/DOWTY/HAWE/REXROTH/GATES/BONDIOLI/EQUIVALENT |
| Make And Model Of Jetting Hose | PARKER,USA/ PIRANHA/ EQUIVALENT |
| Make And Model Of Jetting Nozzle | NUOVA CONTECT OR EQUIVALENT |
| Make And Model Of Split Shaft PTO Unit | PZB, ITALY OR EQUIVALENT MAKE |
| Make And Model Of Control Panel | MOBA/EQUIVALENT |
| Make And Model Of Water Filter | JAIN OR EQUIVALENT MAKE |
| Make And Model Of Hydraulic Crane | PALFINGER PK 10000C |
| Engine BHP@rpm (hp@rpm) | 300 hp@rpm |
| Vacuum Blower Type - Rotary Tri-lobe/Positive Displacement/Injection Air- Cooled | Yes |
| Hydraulic Jetting Pump | Yes |
| Complete Equipment ARAI/VRDE/ICAT Certification (Suction Dump Tank) | Yes |
| If Yes, Please Mention ARAI/VRDE/ICAT No. (Suction Dump Tank) | WILL PROVIDE |
| NGT Approval Needs To Be Provided By The Govt. Department (Suction Dump Tank) | Yes |
| Chassis Certification ARAI/VRDE/ICAT (Suction Dump Tank) | Yes |
| Chassis Certification ARAI/VRDE/ICAT No. (Suction Dump Tank) | AAFN 0260 |
| Form 22 A - For Compliance With Pollution Standards, Safety Standards Of Components And Road Worthiness As Per CMVR Rules (Suction Dump Tank) | Yes |
| Make And Model Of Suction Dump Tank Chassis | TATA LPT1613/42 BSIV |
| Number Of Suction Dump Tank | 3 Nos. |
| GVW Of Chassis (Suction Dump Tank) | 16200 Tonne |
| Vehicle Emission Complaince (Suction Dump Tank) | BS IV |
| Cooling System - Turbo Charged/Water Cooled (Suction Dump Tank) | Yes |
| Type Of Fuel (Suction Dump Tank) | Diesel |
| Engine BHP (Suction Dump Tank) | 134 HP |
| Tyre Size (Suction Dump Tank) | Others |
| If Others, Please Mention Tyre Size | 10R20-16PR |
| Wheelbase (Suction Dump Tank) | 4225 mm |
| Truck Chassis Should Be Fitted With Side P.T.O. On The Vehicles Gear Box (Suction Dump Tank) | Yes |
| Standard Cabin Sitting Capacity (No. Of Persons) | 2 Nos. |
| Hydraulic Tipping Arrangement (Suction Dump Tank) | YES |
| Rear Door Opening (Suction Dump Tank) | HYDRAULICALLY |
| Number Of Compartments (Suction Dump Tank) | 2 Nos. |
| Clean Water Compartment Capacity (Suction Dump Tank) | 2000 Litres |
| Sludge Compartment Capacity (Suction Dump Tank) | 8000 Litres |
| Total Compartment Capacity (Suction Dump Tank) | 10000 Litres |
| Thickness Of Water Tank Plate(Conforming To IS:2062 Grade-A) | 6 |
| Material Of Tank With Material Grade (Suction Dump Tank) | CORTEN STEEL |
| Jetting System For Sludge Tank Washing (Suction Dump Tank) | Yes |
| Jetting System Discharge Capacity (Suction Dump Tank) | 70 LPM |
| Jetting Pump Pressure (Suction Dump Tank) | 130 bar |
| Drive Rating @ Pump RPM (Suction Dump Tank) | 48 HP @ RPM |
| Pump Drive From PTO (Suction Dump Tank) | Yes |
| Torque (Suction Dump Tank) | 400 Kgm |
| PTO Arrangement (Suction Dump Tank) | Yes |
| Complete Equipment ARAI/VRDE/ICAT Certification (Water Tank) | Yes |
| If Yes, Please Mention ARAI/VRDE/ICAT No. (Water Tank) | WILL PROVIDE |
| NGT Approval Needs To Be Provided By The Govt. Department (Water Tank) | Yes |
| Chassis Certification ARAI/VRDE/ICAT (Water Tank) | Yes |
| Chassis Certification ARAI/VRDE/ICAT No. (Water Tank) | AAFN 0260 |
| Form 22 A - For Compliance With Pollution Standards, Safety Standards Of Components And Road Worthiness As Per CMVR Rules (Water Tank) | Yes |
| Make And Model Of Water Tank Chassis | TATA LPT1613/42 BSIV |
| Number Of Water Tank | 1 Nos. |
| GVW Of Chassis (Water Tank) | 16200 Tonne |
| Vehicle Emission Compliance (Water Tank) | BS IV |
| Cooling System - Turbo Charged/Water Cooled (Water Tank) | Yes |
| Type Of Fuel (Water Tank) | Diesel |
| Engine BHP (Water Tank) | 134 HP |
| Tyre Size (Water Tank) | Others |
| If Others, Please Mention Tyre Size | 10R20-16PR |
| Wheelbase (Water Tank) | 4225 mm |
| Truck Chassis Should Have A Provision For Side P.T.O. On The Vehicles Gear Box (Water Tank) | Yes |
| Standard Cabin Sitting Capacity (No. Of Persons) | 2 Nos. |
| Water Tank Capacity | 9000 Litres |
| Contruction Of Water Tank - Cylindrical With Dished Ends | Yes |
| Thickness Of Water Tank Plate (Conforming To IS:2062 Grade-A) | 6 mm |
| "Material Of Tank With Material Grade (Water Tank) " | SS 304 |
| Tank Mounting Frame (Water Tank) | ISMC-150 MS Section |
| Water Pump Set For Sucking Water From The Tank And Revert It To Main Unit | Yes |
| Fuel Type Of The Water Pump (Water Tank) | Diesel |
| Water Pump Capacity (Water Tank) | 7.2 HP @ RPM |
| Discharge Capacity (Water Tank) | 275 LPM |
| Length Of PVC Suction Hose (Water Tank) | 30 metre |
| PTO Arrangement (Water Tank) | Yes |
| Complete Equipment ARAI/VRDE/ICAT Certification (Crane) | Yes |
| If Yes, Please Mention ARAI/VRDE/ICAT No. (Crane) | WILL PROVIDE |
| NGT Approval Needs To Be Provided By The Govt. Department (Crane) | Yes |
| Chassis Certification ARAI/VRDE/ICAT (Crane) | Yes |
| Chassis Certification ARAI/VRDE/ICAT No. (Crane) | AAFN 0204 F03 Dtd. 21-10-2016 |
| Form 22 A - For Compliance With Pollution Standards, Safety Standards Of Components And Road Worthiness As Per CMVR Rules (Crane) | Yes |
| Make And Model Of Crane Chassis | LPT1109H EX2/42 |
| Number Of Crane | 1 Nos. |
| GVW Of Chassis (Crane) | 12990 Tonne |
| Vehicle Emission Compliance (Crane) | BS IV |
| Cooling System - Turbo Charged/Water Cooled (Crane) | Yes |
| Type Of Fuel (Crane) | Diesel |
| Engine BHP (Crane) | 125 |
| Tyre Size (Crane) | Others |
| If Others, Please Mention Tyre Size | 8.25 X 20 -16 PR |
| Wheelbase (Crane) | 4200 |
| Truck Chassis Should Have A Provision For Side P.T.O. On The Vehicles Gear Box (Crane) | Yes |
| Driver Cabin - Tilted Type (Crane) | Yes |
| Lifting Moment (Crane) | 9 Ton-Meter |
| Lifting Capacity (Crane) | 5700 |
| Horizontal Outreach (Crane) | 6 meter |
| Lifting Capacity At Max Outreach (Crane) | 1500 Kg |
| Stabiliser Spread (Std.) | 3.3 Metre |
| Stabiliser Spread (Max.) | 5.6 Metre |
| Hydraulic Pump (Op. Data) | 50 LPM |
| Dead Weight (Crane) | 1100 Kg |
| Tipper Body - Box Type/all Steel Welded (Crane) | Yes |
| Load Body Volume (Crane) | 5 Cu.m |
| Plate Thickness Of Body At Bottom (Crane) | 4 mm |
| Plate Thickness Of Body At Sides (Crane) | 2.5 mm |
| Plate Thickness Of Body At Door (Crane) | 2.5 mm |
| Tipping Angle (Crane) | 40 Degree |
| Pressure Regulating Valve | Yes |
| Safety Valve | Yes |
| Suction Strainer | Yes |
| Hydraulic System | Yes |
| Full Bore QuickActing Valves In The Sewage Path. | Yes |
| Air Pumps To Safeguard The Pump From Overloading. | Yes |
| Sludge Trap Between The Air Pump And The Tank | Yes |
| Float Cut Out Valve To Seal The Pump Suction Line | Yes |
| Three Sewer Cleaning Nozzles With Varying Rearward Angles | Yes |
| One Nozzle Extension For Easy Fixing Of The Hose And The Nozzle | Yes |
| Two Stop Tank Strainer Elements | Yes |
| Two Sets Of Operation And Service Manuals And Spare Parts Lists | Yes |
| Hose Guide | Yes |
| Counter | Yes |
| Four Reels Of Hose Pipe, Each Of 100m Length | Yes |
| Set Of Spares For 3 Year Operation | Yes |
| Warranty Time | 24 Months |
| Warranty Distance | 10000 km |
| No. Of Free Service (with Consumable) | 6 Nos. |
| Comprehensive Maintenance | Yes |
| Comprehensive Maintenance Duration | 1 |
| If Yes, During First Year Warranty Period For 8 Hours Shift, 26 Working Days In A Month ( One -driver, One Helper On Each Unit And 01 Driver, 04-helper Along With Main Unit And Maintenance/admin/managerial Staff As Per Requirement ) | yes |
| Water Pump Size | 75 X 63 metre |
Price Dekho Price List in india© 2018 GeM All rights reserved.
