1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
Apparatus is to verify the Input, Output Transfer Characteristic of PNP NPN transistors in common emitter/base mode. Complete unit provided with all components, regulated power supplies, meters etc. to perform the experiment with LEDs. Two built in continuously variable regulated power supplies. Four MO-65 moving coil type meters are to be provided to monitor voltage current with separate terminals for each meter. Rugged construction, compact unit provided with self explanatory USERS Manual. Special design of non-breakable ABS box, gives maximum visibility for scale of meters. Common Emitter mode, Common base mode..
| Other Specifications Download Specification | |
|---|---|
| DC Voltage Output Rating | 0 to 30 Volt |
| DC Current Output Rating | 0 to 4 Ampere |
| Maximum Power | 120 Watt |
| Load Regulation (Voltage) ± (% Of Output + Offset) | less than 0.01 + 2 mV |
| Load Regulation (Current) ± (% Of Output + Offset) | less than 0.05 + 1.5 mA |
| Line Regulation (Voltage) ± (% Of Output + Offset) | less than 0.01 + 1 mV |
| Line Regulation (Current) ± (% Of Output + Offset) | less than 0.05 + 0.1 mA |
| Over Voltage Protection Accuracy | +- 0.5 + 0.5 V |
| Over Voltage Protection Response Time | less than 10 milli sec |
| Ripple And Noise Voltage (20 Hz To 20 MHz) | less than 1 mVrms less than 4 mVpp |
| Ripple And Noise Current (20 Hz To 20 MHz) | less than 4 mArms |
| Readback Voltage Accuracy | 0.05 + 10 mV |
| Readback Current Accuracy | 0.15 + 4 mA |
| Readback Voltage Resolution | 1 mV |
| Readback Current Resolution | 0.1 mA |
| Operating Temperature | 0-50 Degree C |
| Gperating Humidity (RH) | N/A % |
| PC Interface | USB |
| Dimensions | N/A mm x mm x |
| Weight | GPIB gms |
| Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : (a) Dry Heat : For 16 Hrs. At A Temp. Of 55 Degree C In Accordance With IS:9000/part-3/section-5/1977 (reaffirmed In 2007). (b) Cold Test : For 4 Hrs. At A Temp. Of -20 Degree C In Accordance With IS:9000/part-2/section-4/1977 (reaffirmed In 2007). (c) Damp Heat (Cyclic)Test : For 2 Cycles Of 24 H Each At A Temp. Of 40 Degree C & 95% RH In Accordance With IS:9000/part-5/section-1/ 1991 (reaffirmed In 2007). After Environmental Conditioning Sequence As Above And A Recovery Period Of Two Hours, The Instrument Shall Be Checked For Complete Functional Parameters, Which Should Be With In Limits.(Test Reports Are To Be Furnished When Demanded By Buyer) | Yes |
| Test Report No. | N/A |
| Test Report Date | N/A |
| Name Of The Lab | N/A |
| Warranty | 1 Year |
Price Dekho Price List in india© 2018 GeM All rights reserved.
