1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
Inflatable rescue boat for disaster management. with or without jason-s cradle. Length Of Engine Shaft 15 inch/20 inch.
| Other Specifications Download Specification | |
|---|---|
| Confirmity To Standards For 4.7 M Rubberised Inflated Boat (RIB) As Per ISO 6185-3 /IMO/ LSA | Yes |
| Confirmity To Standards For Boat Hull Design Accordance With Classification Society (IRS/ABS/LR/BV/GL/NK/DNV/RINA) Rules And Norms Issued By NCD 4003 Issue 6, 2015 | Yes |
| Hull Construction Material As Per Class Approved((IRS/ABS/LR/BV/GL/NK/DNV/RINA) | Multiaxial Non Crimp Fabric with Vinyl EsterEpoxy Resin Meeting Fire Standards of Class |
| Functions Performed At Sea And In Harbour | Life Boat , Search and Rescue Boat Transport Boarding and landing party on to own or enemy ships and shoreFor carrying of working parties Passengers |
| Make Of 4.7 Meters Rubberised Inflated Boat (RIB) | GEE PEE |
| Model No. Of 4.7 Meters Rubberised Inflated Boat (RIB) | GP10 |
| Exterior Size Of Boat , Min | Others as per ISO 6185-3 |
| If Others Than Specify The Exterior Size Of Boat | 4500mm X 1960mm (Minimum) |
| Interior Size Of Boat , Min ( Mm X Mm) | Others as per ISO 6185-3 mm x mm |
| If Others Than Specify The Interior Size Of Boat ( Mm X Mm) | 3200mm X 1000mm (Minimum) mm x mm |
| Deflated Size Of Hull (mm X Mm X Mm) | 1150 x 650 x 350 mm3 |
| If Others Than Specify The Deflated Size Of Hull, (mm X Mm X Mm) | na mm3 |
| Floor Board Size Of Boat | 775 x 1000 x 150 mm3 |
| If Others Than Specify The Floor Board Size Of Boat(mm X Mm Xmm) | na mm3 |
| Maximum Draught Including Appendages | 0.35 m for Hull and 0.45 m at OBM meters |
| Weight Of Boat Suitable For 10 Persons , Max( Including Members Too) | 970 Kg |
| Total Inflatable Chambers | 4 |
| Inflatable Chamber In Main Hull | 4 |
| Inflatable Chamber In Keel | 1 |
| Diameter Of Tube , Min | 48 cms |
| Boat Must Provide Suffucient Buyoncy That It Does Not Sink And Satisfactorly Clear Swamp Test | Yes |
| Max Speed At 85% MCR Of OBM In Light Load Conditions | 12 Knot |
| Economical Speed Under Full Load Condiotion | 6 Knot |
| Endurance At Economical Speed And At Full Load Condition | 8 Hrs |
| Inflatable Mechanism Of Boat | Foot Pump |
| The Hull, Air Tuber ( Chambers) , Keels Must Made From Hyplon With 1670 Denier | Yes |
| The Fabric Must Have Approval Of BSMA/IMO/LSA Or ISO 6185-3 | Yes |
| Plastic Coated Transom To Form Waterproof Cocoon As Per ISO 6185-3 | Yes |
| Overlapping Of Seam Of Boat | Quadruple |
| 5/8" Grab Line For Safety | Yes |
| Weight Of Boat Without OBM And Floor Board | 80 Kg |
| Inflatable Keel Diameter 18 Cm For Stability And Swift Water Rescue | Yes |
| Type Of Air Valve | One way Type Confirming to International Standards like C7 or equivalent |
| Make Of OutBoard Motor Engine (OBM) | Mercury |
| Model No.of OutBoard Motor Engine (OBM) | 30ML |
| Fuel | Petrol |
| No. Of Strokes | 4 |
| No . Of Cylinders | 3 |
| Fuel Capacity | 25 Ltrs |
| Power HP @ Rpm | 30 HP at RPM |
| Engine Starting | Manual Starting |
| Engine Stopping | Deadman switch |
| Fuel Injection System | Electronics Fuel Injection System |
| Engine Cooling System | Watercooled with Thermostat |
| Engine Lubrication | Wet Sump with Pressure |
| Engine Exhaust | Propeller Type |
| Trim System | Manual Type |
| Type Of Steering System | Tiller Handle |
| Type Of Bilge System | NA |
| Length Of Engine Shaft | 50 Meter |
| The Engine And Drive Line Shall Be Fitted In Enclosed Housing To Protect From Sea Water | Yes |
| Dry Weight ( Excluding Fittment And Accessories) | 75 Kg |
| Colour Of The Boat | Orange |
| 2 Paddle For Emergency Rowing | Yes |
| Floor Board Shall Be Interlocking Type Of Ployethene Material/marine Plywood With Fibre Glass Reinforced Plastic Coating With Carry Bag | Yes |
| Baot Shall Have Round/ Conical Pantoons For Rapid Planning | Yes |
| Built In Oarlocks For Easy Rowing | Yes |
| Two Stainless Steel "D " Rings For Towing | Yes |
| Two Layer Of Material On Lower Tubes For Better Puncture Resistance And Abrasion | Yes |
| Standard Tool Kit Including Open Spanner, Socket, T Handle,Extension For Socket, Screw Driver , Feeder Gauge, Box Spanner, And Torque Spanner Of Required Numbers And Sizes. | Yes |
| Rating For All Electrical Fitting / Switches | Others , Must equivelent to IP66 |
| Electric Horn Fitted On Console | 5 meters |
| Suitable For Continuous Operation Up To 50 Deg Cel, Relative Humidity Of 95 % At 35 Deg Cel And Roll Of 25 Deg Cel And Pitch Of 8 Degree | Yes |
| The Anchor Shall Be Connected To 27 M Long 16/20 Mm Dia Terylene Rope, Stowed On Special Hinged Horns | Yes |
| Fire Extinguishers, SOLAS Aaproved | Yes |
| Four Removable Rescue Patch Of 20 X 40 Cm Made Of Retro Reflecting Tape | Yes |
| Mast And Navigation Lights | Yes |
| Mandatory Fittment On Collar Including Rubbing Stakeof Vinyl/urethane/EPDM/Neoprene, D Rings,Anti Sid Coating Etc.as Per Standards | Yes |
| Additional Fittment On Collar Including 2 Paddle Blade Pocket,1 Drought Type Fair Lead, 2 Rope Stowage Pocket,4 Securing Rings,1 Bow Rings Etc | Yes |
| Life Saving Equipments In A Wooden Box Carrying First Aid Kits , One Aldi's Lamp One Throwing Quoits With Buyont Line , Distress Signal Box | Yes |
| Strong Points For Towing , Anchoring, Mooring As Per ISO15084 | Yes |
| Jason Cradle | Yes |
| Warranty In Years | 1 Years |
| Avaialbility Of Drwaing | Yes |
| Instruction Manual | Yes |
| No. Of Life Jackets | 8 |
| No. Of Life Buoys | 2 |
| Availability Of Test Report Including Environmental Testas Per ISO 6185-3 /LSA/IMO Latest Amndmt.from Central Govt./NABL/ILAC Acredited Lab To Prove Confirmity To Specification | Yes |
| Test Report No. | DLH16B060 |
| Test Report Date | 30-03-2016 |
| Name Of The Lab | INDIAN REGISTER OF SHIPPING |
| Address Of The Lab | COPIA CORPORATE SUITES, JASOLA, DELHI |
Price Dekho Price List in india© 2018 GeM All rights reserved.
