× All the transactions performed on 2.0 is available here. To access Market click "Home".

unity300 hybrid unified storage system 100 tb sas (dellemc)(unity300 hybrid unified storage system 100 tb sas)

` 11,326,164.00

  • MRP: `12944187.00

Unity300 Hybrid Unified Storage System 100 TB SASUnity300 Unified Storage System with 48GB of memory per Array, Dual Controller, 6U form factor, 88Gbps FC ports, 4 1Gbps ports, 100TB of usable capacity using 1.8TB 10K RPM SASRAID 5, Supported Protocols- NFSv3, NFSv4, NFSv4.1 CIFS SMB 1, SMB 2, SMB 3.0, SMB 3.02, and SMB 3.1.1 FTP and SFTP FC, iSCSI..

  • Availability: 1 In Stock
  • Min. Qty. Per Consignee: 1
  • Type of Drive - SAS
  • Minimum number of Front end ports - 8
  • Minimum number of back end ports - 2
  • Drive slot Scalability - 125 No.
  • Broad Specification of SAN System on SATA II/NL-SAS Drive 0n 7.2 K RPM : The system comprise of : 1. Set of fibre channel cables with LC-LC connectors 5 m long (for each active port on the storage). 2. Min Two controllers (or as applicable for model uploaded on the GeM ) in specified configuration. 3. SATA II disk array populated with dual ported SATA II or NL-SAS drives, redundant power supply and fans, hot-swappable. 4. Two redundant hot-swappable active-active RAID controllers configured for RAID 0, 5/6 RAID levels or better. The usable capacity should be configured on RAID 5/6 or better. For every 30 disk, one spare disks needs to be configured over and above the required capacity. 5. Storage management software for configuration and multi-pathing (part of the supply). 6. Multi-pathing and load balancing and fail over software with license for 16 windows/Linux servers or shall support native multipathing of OS (part of the supply). 7. All interconnecting cables and connectors. 8. Snapshot license of the provisioned capacity (part of the supply). 9. The array is supplied with 4 x 1 Gbps or higher iSCSI ports native or through additional controllers (part of the supply). The System shall support : 1. 1/2/3/4TB LFF 7200RPM SATA/NL-SAS drives. 2. Hardware based data replication at the array controller level. 3. The array is capable to support remote replication to DR location. 4. On line micro code upgrade and disk expansion upgrade without downtime. 5. Configuration in "No Single Point of Failure" for disk drives, power supply. 6. SAN Storage to be configured with Host kits which will connect to the SAN Storage. - NA
Other Specifications Download Specification
Usable Capacity Of SAN System 100 TB
Type Of Drive SAS
Minimum Number Of Front End Ports 8
Minimum Number Of Back End Ports 2
Total Configrable Cache Per Controller 16 GB
Drive Slot Scalability 125 No.
No Of Drive Slots Populated In The SAN System 75 No.
Broad Specification Of SAN System On 6Gbps Or Higher On SAS Drive 10 K RPM / SSD : The System Comprise Of : 1. Set Of Fibre Channel Cables With LC-LC Connectors 5 M Long (for Each Active Port On The Storage). 2. Min Two Controllers (or As Applicable For Model Uploaded On The GeM )in Specified Configuration With Front End Port, Back End Port And Disc With 6 Gbps Speed. 3. Disk Array Populated With Dual Ported Drives Of 6Gbps Or Higher Disk, Redundant Power Supply And Fans, Hot-swappable. For Every 30 Disk, One Spare Disks Needs To Be Configured Over And Above The Required Capacity. 4. Two Redundant Hot-swappable Active-active RAID Controllers Configured For RAID 5/6 RAID Levels Or Better. The Useable Capacity Shall Be Configured On RAID 5/6 Or Better. 5. Storage Management Software For Configuration And Multi-pathing(part Of The Supply). 6. Multi-pathing And Load Balancing And Fail Over Software (part Of Supply) With License For 16 Windows/Linux Servers Or Shall Support Native Multipathing Of OS. 7. All Interconnecting Cables And Connectors. 8. The Array Be Supplied With 4 X 1 Gbps Or Higher ISCSI Ports Native Or Through Additional Controllers(part Of The Supply) For Item Uploaded. 9. Snapshot License Of The Provisioned Capacity (part Of The Supply). 10. The Storage Is Configured To Connect Minimum 16 Hosts. 11. The Storage Is Configured Along With Host Kit. The System Supports: 1. Hardware Based Data Replication At The Array Controller Level. 2. Storage Array Based Management Of Complete Array, The Software For Array Management Shall Be Turning On Array Controllers In High Availability. 3. The Array Is Capable To Support Remote Replication To DR Location. 4. On Line Micro Code Upgrade And Disk Expansion Upgrade Without Downtime. 5. Configuration In "No Single Point Of Failure" For Disk Drives, Power Supply. 6. SAN Storage To Be Configured With Host Kits Which Will Connect To The SAN Storage. In-compliance with the specifications
Broad Specification Of SAN System On SATA II/NL-SAS Drive 0n 7.2 K RPM : The System Comprise Of : 1. Set Of Fibre Channel Cables With LC-LC Connectors 5 M Long (for Each Active Port On The Storage). 2. Min Two Controllers (or As Applicable For Model Uploaded On The GeM ) In Specified Configuration. 3. SATA II Disk Array Populated With Dual Ported SATA II Or NL-SAS Drives, Redundant Power Supply And Fans, Hot-swappable. 4. Two Redundant Hot-swappable Active-active RAID Controllers Configured For RAID 0, 5/6 RAID Levels Or Better. The Usable Capacity Should Be Configured On RAID 5/6 Or Better. For Every 30 Disk, One Spare Disks Needs To Be Configured Over And Above The Required Capacity. 5. Storage Management Software For Configuration And Multi-pathing (part Of The Supply). 6. Multi-pathing And Load Balancing And Fail Over Software With License For 16 Windows/Linux Servers Or Shall Support Native Multipathing Of OS (part Of The Supply). 7. All Interconnecting Cables And Connectors. 8. Snapshot License Of The Provisioned Capacity (part Of The Supply). 9. The Array Is Supplied With 4 X 1 Gbps Or Higher ISCSI Ports Native Or Through Additional Controllers (part Of The Supply). The System Shall Support : 1. 1/2/3/4TB LFF 7200RPM SATA/NL-SAS Drives. 2. Hardware Based Data Replication At The Array Controller Level. 3. The Array Is Capable To Support Remote Replication To DR Location. 4. On Line Micro Code Upgrade And Disk Expansion Upgrade Without Downtime. 5. Configuration In "No Single Point Of Failure" For Disk Drives, Power Supply. 6. SAN Storage To Be Configured With Host Kits Which Will Connect To The SAN Storage. NA
SAN Switch Not-Available
Storage System Is Compliance With IPv6 Yes
Scope Of Supply It includes installation, commissioning & integaration togather with all necessary software to make the system fully functional as intended.
Additional Capacity (Compatible With Main Usable Capacity Of SAN) No
If Yes, Additional Capacity Added NA TB
Capacity Of Each Drive, Number Of Drive & Type Of Drive To Achieve Additional Capacity NA
Operating Temp. Range 10°C to 35°C Degree C Degree C
Storage Temp. Range 25°C/hr Degree C Degree C
Operating Humidity (Rh) 20% to 80% relative humidity with 21C maximum dew point (maximum wet bulb temperature). %
Storage Humidity (Rh) Relative humidity: 20% to 80% non condensing %
BIS Registration Under CRS Of MeiTY Yes
BIS Registration No ( Shall Be Furnished When Demanded By The Buyer) NA
Other International Certification Yes
If Yes, Type Of Certification & Certification No (Shall Be Furnished When Demanded By Buyer) NA
Warranty 3 Year
No Of Contrllers Available In SAN System 2
Capacity Of Drive And Type SAS 1.8TB 10K RPM
RAID Option 1/0, 5, 6
No Of SAN Switch Provided With The Sorage System NA
If Available, Type Of SAN Switch (@ 8Gbps Or Higher FC) NA
No Of Active Ports In The SAN Switch NA
Standby Power Consumption Of System 1.32KVA KW KW
Max Power Consumption Of System 1.32KVA KW KW
Hardware Form Factor Of SAN System 6U RU
Hardware Form Factor Of SAN Switch NA RU RU
Protocols Supported By The Storage From Day 1 NFSv3, NFSv4, NFSv4.1; CIFS (SMB 1), SMB 2, SMB 3.0, SMB 3.02, and SMB 3.1.1; FTP and SFTP; FC, iSCSI.
Operating System Platforms And Clustering Supported By The Storage From Day 1 HP-UX, IBM AIX, Microsoft Windows Server, Novell Suse, Oracle Linux, RedHat , Solaris etc. For more details and updated information please refer to ESSM

Price Dekho Price Dekho Price List in india