GW-INSTEK GDS-2000A Series DSO offers 4-channel 100MHz bandwidth with 2GSa/s RTS 100GSa/s ETS .An 8-inch 800 x 600 high-resolution TFT LCD display, 1mV/div to 10V/div vertical range and 1ns/div to 100s/div time base, GDS-2104A is able to demonstrate waveforms of complicated and obscure signals. With 2M point record length and Waveform Search and Segmented Memory functions .The events of interest can be captured and saved into the Segmented Memory, Under Waveform Search mode, is able to Search and Mark the waveform sections, which comply with user-defined search condition and threshold level within the whole memory., with Zoom and Play/Pause button to scroll through whole displayed waveform, the user can rapidly navigate all the waveforms in an efficient way. Option to easy conversion from a DSO into a MSO under a plug-and-play plus DDS based function generator, Pl Refer GW-INSTEK datasheet for detailed specifications. Prices indicated including GST @18 ...
Other Specifications Download Specification | |
---|---|
Type | Digital |
Operating System | Non -Windows |
Bandwidth Upgradability | No |
No. Of Analog Channels | 4 Number |
Digital Channels | No |
No. Of Digital Channels | NA Number |
Record Length Per Digital Channel Simultaneously | NA GS/sec |
Sampling Rate Per Digital Channel Simultaneously | NA Mega Points |
Min. Detectable Pulse Width | NA ns |
Memory Upgradability | No |
Segmented Memory Feature Availability | Yes |
Vertical Sensitivity | 1mV/Div to 5 V/Div |
Vertical Resolution | 8 bits |
Coupling | AC, DC, GND |
Time Base Range | 1ns/div ~ 100s/div (1-2-5 increments) |
Trigger Types | Edge, Pulse Width, Video, Pulse Runt, Rise & Fall (Slope), Glitch Trigger, Timeout, Alternate, Event-Delay(1~65535 events), Time-Delay(Duration, 4nS~10S) and External Trigger |
Measurements | Automatic Measurements: 36 sets: Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, ROVShoot, FOVShoot, RPREShoot,FPREShoot, Frequency, Period, +Edges, -Edges, FRR, FRF, FFR, FFF, LRR, LRF,+Width, -Width, Duty Cycle, +Pulses, -Pulses,RiseTime, FallTime,LFR, LFF, Phase. Waveform Signal Process: Plus, -, ×, ÷, FFT, FFTrms, √, d/dt, ∫dt. Cursors for Amplitude, Time, Gating available |
Frequency Analysis Feature | Yes |
In-built Frequency Counter | Yes |
In-built Function Generator | No |
Acquisition Modes | Normal, Average, Peak Detect, Single |
Display Type | Colour |
Display Size | 20.32 CM |
I/O Interface | RS-232C, Go/NoGo BNC, USB 2.0 High-speed host port x 1, USB High-speed 2.0 device port x 1 |
Standard Accessories To Be Supplied | Four 10X probes, Power Cord, Manual,to be supplied Calibration Certificates |
Operating Temperature Range | 0°C to 50°C Degree C |
Operating Humidity (RH) | ≤80% at 40°C % |
Power Supply | 230V +- 10% , 50Hz |
Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : 1. Dry Heat Test : 45 Deg C For 16 Hours As Per IS:9000/Pt.3/sec.5/1977 (reaffirmed In 2007) 2. Cold Test : 0 Deg C For 4 Hours As Per IS:9000/Pt.2/sec.4/1977 (reaffirmed In 2007) 3. Damp Heat Test: 95% RH At 40 Deg C, Two Cycles Of 24 Hours Each Separated By A Gap Of 4 Hours As Per IS:9000/Pt.5/sec. 1/1991 (reaffirmed In 2007) The Oscilloscopes Shall Be Checked Functionally Before And After Recovery Period Of 1-2 Hours Of The The Environmental Test Sequence As Above. Functional Tests Shall Include Switching ON And Calibration | yes |
Test Report No. | ETDC(MH)/T&M/104 |
Test Report Date | 17/08/2015 |
Name Of The Lab | ETDC Mohali |
Warranty | 3 Year |
Real Time Bandwidth | 100 MHz |
Record Length Per Analog Channel Simultaneously | 2M Max; 1M per Channel for Full Channel Operation Mega Point |
Sample Rate Per Analog Channel Simultaneously | 2 GS/s Max; 1 GS/s per Channel for Full Channel Operation GS/sec |
Waveform Update Rate | 80000 Waveform per Second Waveforms/ |
Time Base Accuracy | 20 PPM |