14 Cu.M Hook Loader on ASHOK LEYLAND 1618 /1C - 4X2 Haulage 4330 MM 170.5 WB goods chassis fitted with H Series BS IV diesel engine, 6 speed gear box, Cargo sleeper Cabin..
Other Specifications Download Specification | |
---|---|
Main Engine Capacity | 5760 cc |
Chassis Certification No. ARAI/VRDE/ICAT | ARAI.AAKN0066 |
Make Of Chassis | AshokLeyland |
Type Of Chassis Frame | Full Frame Chassis |
Category Of Vehicle For Which Chassis To Be Used | Heavy Capacity Waste/Garbage Collection Trucks |
Type Of Chasssis | Chassis with Facecowl |
Type Of Fuel | Diesel |
Vehicle Emission Complaince | BS-IV |
Fuel Consumption ( Declared By OEM As Certified By Test Agency Under Rule 115of CMVR 1989) | 0 Ltr/Hr |
Speed, Max | 80 Km/Hr |
Main Engine Power BHP@rpm | 132KW @ 2400RPM BHP@rpm |
Engine Torque Max,@ Rpm | 660NM @ 1200-1900RPM Nm@rpm |
Main Engine Aspiration | Turbocharged Intercooled |
No. Of Cylinder In Main Engine | 6 |
Fuel Tank Capacity | 300 Ltrs |
Length Of Chassis | 7788 mm |
Width Of Chassis | 2432 mm |
Height Of Chassis | 3200 mm |
Gradeability Of Vehicle With Load( %) | 31 % |
Gradeability Of Vehicle Without Load( %) | 31 % |
Ground Clearance | 250 mm |
Wheel Base | 4330 mm |
Kerb Weight | 6515 Kg |
Gross Vehicle Weight | 16200 Kg |
No Of Axle | 2 |
No.of Front Tyres | 2 |
No. Of Rear Tyres | 4 |
Type Of Front Axle And Suspension System | Semi-elliptic multi leaf |
Type Of Front Axle And Suspension System | Semi-elliptic multi leaf |
Type Of Vehicle Tyre | Radial |
Size Of Front Tyres | 10.00 X 20 – 16PR Radial |
Size Of Rear Tyres | 10.00 X 20 – 16PR Radial |
Size Of Wheel | 10 mm |
Chassis Transmission System | Automatic |
Type Of Steering | Power Operated |
Turning Radius,Min | 8300 mm |
Speed Governers | Yes |
ABS Fitted | Yes |
Type Of Clutch | Single Plate Dry plate |
Bottom Frame Of Hook Loader ( Comprising Of Two Longitudinal Domex/ Equivalent Steel Runners With A Yield Strength Of Approx 700 Mpa And A Key Reinforcement Of The Same Material) | Yes |
Tipping Frame Of Hook Loader Should Pivot At The Rear Of The System Bottom Frmae And Supports The Rear Rollers Made From Steel Or High Grade Cast Iron. | Yes |
Main Frame Of Hook Loader To House The Hook Must Sliding Arm Type And Should Be Enable The Dismounting Processthis Frame Should Pivot Around An Axle Which Rotates In Bearing Situated In Front Of The Tipping Frame | Yes |
Sliding Arm Should Provide The Possibility To Transport Containers Of Various Length | Yes |
PA6G/Equivalent Oil Polyamide Synthetics (used For Better Sliding ,Lubrication Free Action) | Yes |
Shot Blasting For Every Component Of Hook Loader | Yes |
Anti Corrosive Double Coated Paint On Hook Loader | Yes |
Type Of Compactor For Waste Collection | Front Loading Type with Hydraulic Operated |
Volume Of The Compactor | 10 m3 |
Length Of The Compactor ,Exterior | 4880 mm |
Width Of The Compactor ,Exterior | 2400 mm |
Height Of The Compactor ,Exterior | 2300 mm |
Tip Cart Capacity | 1800 Ltrs |
ISO 9001:2008 Certified Hydraulic And Allied Components | Yes |
Hydraulic Tank Capacity | 68 Ltrs |
Type Of Pump Used In Hydraulic Assembly | Vane Pump |
Control | Hydraulic |
Filter | 10 Micron |
Operating Pressure,Max | 140 Bar |
Arm Cylinder/Lift Cylinder(Doble Acting ,Equipped With Counter Balance Valve And Built In By Pass Valve ) | Yes |
No. Of Arm Cylinder/Lift Cylinder | 2 |
Jib Cylinder/Slide Cylinder(Doble Acting ,Equipped With Counter Balance Valve Hoses,tubes And Fittings | Yes |
No. Of Jib Cylinder / Slide Cylinder | 2 |
Front Vehicle Brake | Drum |
Rear Vehicle Brake | Drum |
No. Of Containers Locking Cylinder( Double Acting) | 2 |
Type Of Boom Locking | Hydraulic |
Stablizers At Suitable Location Along The Rear Of Vehicle To Ensure Stability Of The Vehicle During Loading / Unloading | Yes |
Lifting /Dumping Capacity Of Hook Loader | 12000 Kg |
Self Weight Of Hookloader | 3 Tonn |
Hooklift Length | 1850 mm |
Hooklift Height( From The Bottom Of The Hookbar) | 1300 mm |
Dumping Angle | 45 Degree |
Tipping Time | 30 second |
Container Locking With Hydraulic Mechanism | Yes |
Load Distribution Of Fully Loaded Portable Compactor And Hook Loading Should Be Within The Tolerable Limit Of Axle In A Range Of 30 % On Frnot Axle And 70% On The Rear Axle Of The Total Payload | Yes |
Container Locking Arrangement | Yes |
No. Of Container Locking Arrangement | 2 |
Guiding Rolling Assembly | Yes |
No. Of Guiding Rolling Assembly | 2 |
No. Of Holding Bracket | 2 |
Standard Sparewheel And Tool Kit | Yes |
Warranty Time | 1 Years |
Warranty Distance | 150000 km |
Battery Warranty | 12 months |
No. Of Free Service | 3 |
Transportation Charge In Rupees Per Km | 18 Rs/km |
No. Of Speed/ Forward Gears | 6 |