1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
The Fluke 1623-2 GEO Earth Ground Tester offers data storage and download capabilities via USB port. World class accessories will simplify and speed up testing time.3- and 4-pole Fall-of-Potential, earth resistance loop testing,4-pole Soil Resistivity testing,Selective earth ground rod testing using 1 clamp,Stakeless earth ground rod testing using 2 clamps,IP56 rated for outdoor use,Rugged carrying case,USB data storage and transfer, Internal memory storage up to 1500 records accessible via USB port,Display with special symbols, digit height 25 mm, Wide Measuring range- 0.020 ohm to 19.99 k ohm, Protection by double and/or reinforced insulation. max. 50 V to earth. IEC61010-1 Pollution degree 2,Automatic range selection,You can also perform earth ground tests in places youve not considered before inside bldgs, power pylons, or anywhere you dont have access to soil...
| Other Specifications Download Specification | |
|---|---|
| Display Type | 3 digit LCD display |
| Measurable Earth Resistance Range | Auto ranging |
| 2-pole Method For Resistance Measurement | YES |
| 3-pole Method For Resistance Measurement | YES |
| 4-pole Method For Resistance Measurement | YES |
| Number Of The Stakes | 04 NOS. |
| Material Of The Stakes | GI Steel |
| Length Of The Stakes | 46 cm |
| Diameter Of The Stakes | 0.8 cm |
| Number Of The Test Leads | 1 set of Testleads and Reel Cables of.. (1) 50 m cable reel of red wire.. (1) 25 m cable reel of blue wire.. (1) 25 m cable reel of green wire Nos. |
| Length Of The Test Leads | Test leads- 1.5 M and Reel Cables 25 m - 2 nos and 50 m- 1 no cm |
| No. Of Test Leads With Clamps | 02 Nos. |
| Length Of Test Leads With Clamps | 150 cm |
| Measuring Range1 For Earth Resistance | 0.02 Ohm to 19.99 K Ohms |
| Measuring Range2 For Earth Resistance | 0.02 Ohm to 19.99 K Ohms |
| Measuring Range3 For Earth Resistance | 0.02 Ohm to 19.99 K Ohms |
| Measuring Range4 For Earth Resistance | 0.02 Ohm to 19.99 K Ohms |
| Measuring Range5 For Earth Resistance | 0.02 Ohm to 19.99 K Ohms |
| Measuring Range6 For Earth Resistance | NA Ohms |
| Measuring Range7 For Earth Resistance | NA Ohms |
| Measurable Earth Resistance Resolution For Range1 | 0.001 to 10 Ohms |
| Measurable Earth Resistance Resolution For Range2 | 0.001 to 10 Ohms |
| Measurable Earth Resistance Resolution For Range3 | 0.001 to 10 Ohms |
| Measurable Earth Resistance Resolution For Range4 | 0.001 to 10 Ohms |
| Measurable Earth Resistance Resolution For Range5 | 0.001 to 10 Ohms |
| Measurable Earth Resistance Resolution For Range6 | NA Ohms |
| Measurable Earth Resistance Resolution For Range7 | NA Ohms |
| Measurable Earth Resistance Accuracy For Range1 | (2 rdg + 3 d) reading digits ±% reading ± digits |
| Measurable Earth Resistance Accuracy For Range2 | (2 rdg + 3 d) reading digits ±% reading ± digits |
| Measurable Earth Resistance Accuracy For Range3 | (7 rdg + 3 d) reading digits ±% reading ± digits |
| Measurable Earth Resistance Accuracy For Range4 | (7 rdg + 3 d) reading digits ±% reading ± digits |
| Measurable Earth Resistance Accuracy For Range5 | (7 rdg + 3 d) reading digits ±% reading ± digits |
| Measurable Earth Resistance Accuracy For Range6 | NA ±% reading ± digits |
| Measurable Earth Resistance Accuracy For Range7 | NA ±% reading ± digits |
| Stakeless Test(Clamp On) | yes |
| Facility To Measure Earth Voltage | Not Available |
| If Yes,Measurable Earth Voltage Range | NA Volts |
| If Yes,Measurable Earth Voltage Accuracy | NA % |
| Minimum Open Circuit Output Voltage | 48 Volts |
| Low Battery Indication | Available |
| Over Range Indication | Available |
| If Yes,Measurable Earth Voltage Resolution | NA Volts |
| Internal Memory | 1500 |
| Type Of Battery Used In The Power Supply | AA |
| Battery Backup Time | >3000 measurements, typical, RH + RE 6000 measurements, typical, RH + RE > 10 kOhm Hours |
| Battery Charger Provided With The Meter. | NA |
| Weight Of The Tester | 1100 grams |
| Dimensions(LXWXH) | 25X13.3X18.7 cmXcmXcm |
| Provision For External SD Card | No |
| Interface | YES, USB |
| Operating Temperature Range | -10 C to 50 C degree celsius |
| Operating Humidity Range | 5-95 % |
| All Connecting Cables And Accessories To Be Supplied Along With The Tester. | Yes |
| Details Of All Connecting Cables And Accessories To Be Supplied Along With The Tester. | GEO Earth Ground Tester Users Manual Batteries Quick Reference Guide USB Cable 2 Clamps C1620 Professional Carrying Case 4 Earth Ground Stakes 3 Cable Reels |
| Availability Of Type Test Report From Central Govt. /NABL/ILAC Accredited Lab. To Prove Confirmity To The Specification Including Environmental Test Sequence. 1. Dry Heat Test As Per IS :9000(Part 3/Section 5) 2.Damp Heat(cyclic Test): Two Cycles Of 24 Hours Each As Per IS: 9000(Part 5/section 1) 3.Cold Test At -20 Degree C For Four Hours As Per IS: 9000(Part2 /section 4). After Completion Of Environmental Conditioning Sequence As Specified And Recovery Of 2 Hours, The Functional Parameters Of Earth Resistance Meter Shall Be Checked. | Yes |
| Type Test Report No. | 3945666 |
| TTC Report Date | 10 Oct 17 |
| Name Of Lab | Fluke |
| Address Of Lab | USA |
Price Dekho Price List in india© 2018 GeM All rights reserved.
