Overload Protection Not only does this UPS protect your system from unexpected power disruption but it also protects your system when there is a power overload. LED Indicator This UPS also comes with an LED indicator which signals you when the battery is low so that you can charge it for uninterrupted power supply. Battery This device offers 6 hours to 90% after complete discharge of recharge time..
Other Specifications Download Specification | |
---|---|
Rating In KVA/ Min VAH Capacity Of Battery | 0.5/84 KVA/VAH |
Technology | MOSFET-PWM |
Input | Single phase sinewave(160-280v) Volt |
Rated Output | Single phase sinewave 230v AC , 50Hz Volt |
Load Power Factor | NA |
Variation In AVR Output In AC Mode | NA % |
Variation In Output Voltage In Battery Mode | NA % |
Variation On Output Frequency In Battery Mode | NA Hz |
Inverter Efficiency | NA % |
Total Harmonic Distorsion | NA % |
Switching Over Time | NA Mili sec |
Overload | NA % |
Overload Time | NA Minutes |
Protection Against Short Circuit Of UPS | Yes |
Protection For Outside Input Voltage Range | NA Volt |
Protection Against Discharge Per 12v Battery | 10.5 Volt |
Degree Of Protection | IP-21 |
Type Of Battery | Tubular confirming to IS:13369 |
Type Of Enclosure | Mild steel |
Dry Heat Test At 45 Degree For 16 Hrs As Per IS:9000 Pt-3/sec-5 | Yes |
Damp Heat Test At 45 Degree , RH -95% For 2-cycle As Per IS:9000 Pt-5/sec-1 | Yes |
Cold Test As Per IS:9000 Pt-2/sec-4 | Yes |
Availability Of The Type Test Report From Central Govt./NABL/ILAC Accredited Lab | Yes |
Type Test Certificate No. And Date | NA |
Name Of Lab | NA |
Address Of Lab | NA |