High Performance AC-DC Power Supply - 5550 VA AC -1850 per phase DC - The CSW Series represents a new generation of AC/DC power sources that address the increasing demands on test equipment to perform additional functions at a lower cost. By combining a flexible AC/DC power source with a high performance power analyzer, the Compact CSW Series is capable of handling complex applications that have traditionally required multiple systems. The sleek integrated approach of the CSW avoids cable clutter that is commonly found in test systems. All connections are made internally and the need for digital multimeters, power harmonics analyzers, and current shunts or clamps is eliminated.Since many components in the CSW are shared between the AC/DC source and the power analyzer, the total cost of the integrated system is less than the typical cost of a multiple unit system..
Other Specifications Download Specification | |
---|---|
Power Supply Type | AC + DC |
Input For Power Supply | 342 to 457 Vrms, 3ø L-L (4 wire) |
Number Of Output Phase For AC Power Supply | Three Phase |
Number Of Outputs | 1 |
Waveshape Of Output | AC(Sine, square, clipped, user defined), DC, AC+DC |
AC Output Power | 5550 VA |
Programmable Output Frequency (Min.) | 40 Hz Hz |
Programmable Output Frequency (Max.) | 500 Hz Hz |
Programmable Output Frequency Resolution | "40 Hz to 81.91 Hz (0.01 Hz) 81.90 Hz to 500 Hz (0.01 Hz)" Hz |
Output Voltage | Dual Value |
Output Current | Dual Value |
Output Voltage Range For AC Power Supply | 0-156 V / 0-312V V |
Setup Resolution For AC Power Supply (Voltage) | "0.1 V from Front Panel 0.01 V from remote " mV |
Accuracy For AC Power Supply (Voltage) | ±0.1% of range |
Readback Resolution For AC Power Supply (Voltage) | 10mV mV |
Readback Accuracy For AC Power Supply (Voltage) | 0.5% + 250 mV |
Output Current Range For AC Power Supply | "High : 8 Arms (per phase) Low : 16 Arms (per phase)" A |
Setup Resolution For AC Power Supply (Current) | NA mA |
Accuracy For AC Power Supply (Current) | ± 1% of Range |
Readback Resolution For AC Power Supply (Current) | 1mA mA |
Readback Accuracy For AC Power Supply (Current) | ±1% of range |
DC Output Power | 1850 per phase Watt |
Output Voltage Range For DC Power Supply | "Low: 0-156 VDC High: 0-312 VDC" V |
Setup Resolution For DC Power Supply (Voltage) | "0.1 V from Front Panel 0.01 V from remote " mV |
Accuracy For DC Power Supply (Voltage) | NA |
Readback Resolution For DC Power Supply (Voltage) | 10mV mV |
Readback Accuracy For DC Power Supply (Voltage) | 0.5% + 250 mV |
Output Current Range For DC Power Supply | "High : 8 A (per phase) Low : 16 A (per phase)" A |
Setup Resolution For DC Power Supply (Current) | NA mA |
Accuracy For DC Power Supply (Current) | NA |
Readback Resolution For DC Power Supply (Current) | 1mA mA |
Readback Accuracy For DC Power Supply (Current) | ±1% of range |
Multiple Steps To Cover The Voltage And Current Ranges | Yes |
Line Regulation | ±0.015% % |
Load Regulation | ±0.025% % |
Total Harmonic Distortion (THD) | " 0.25% max, 40 to 100 Hz 0.5% max 100 to 500 Hz" |
Output Ripple & Noise (Max.) | > 60 dB rms below FS voltage mVrms |
Transient Response | NA µSec |
Protection | "Input: Over Current, Over Voltage, Transients Output: Over Current, Over Temperature, Short Circuit " |
Display And Control Features | Backlit LCD display, Keyboard, Encloder knob, fault LED indicators |
Meter | Digital display on LCD |
Input-Output Interfaces | USB, RS-232, GPIB / IEEE-488.2 |
Efficiency | 70% % |
Power Factor | 0 lagging / leading to 1 |
Certificates | Designed to meet EN50081-2 and EN50082-2 European Emissions and Immunity standards. Designed EN61010-1 European safety standards |
Operating Temperature Range | 0 to +45 °C Degree C |
Operating Humidity Range | 0-85 %, non-condensing % |
Accessories To Be Supplied | Software CD, output power safety cover |
Availability Of Type Tests Reports From A Central Govt. Lab OR International Laboratory Accreditaion Cooperation (ILAC)or Their Worldwide Affiliated/ Recognised Labs OR NABL Approved Lab Showing Confirmity To The Specifications | Available |
Name Of The Lab | Ametek Programmable Power |
Address Of The Lab | 9250 Brown Deer Road, Sandiego, CA 92121, U.S.A |
Test Report No. And Date | Yes |
Dimensions | 222 x 597 x 483 mm mmxmmxmm |
Weight | 57.2 Kg Kg |
Warranty | 1 Year |