PQA for Single Phase-2 wire and 3 wire, Three Phase 3 wire and 4 wire, DC Measurement, Transient Measurement 6000V, Current 500 ma to 5.0000kA, 6.5 inch TFT color display 640 x 480 dots. Accessories Include Instructional Manual, Measurement Guide, Voltage Cord one set, AC adapter Z1002, USB cable, Battery Pack Z1003, SD memory card 2GB Z4001, Carrying Case C1001. Clamp on Sensor 500A AC 9661 x 4nos included.
Other Specifications Download Specification | |
---|---|
Type Of Power Analyzer | Three phase |
Display Type | LCD Backlit |
Display Mode | 6.5-inch TFT color LCD (640 × 480 dots) |
Number Of Current Channels | 4 Nos. |
Number Of Voltage Channels | 4 Nos. |
Facility To Measure RMS Voltage | Available |
Measurable Voltage Range | 600.00 V rms Volts |
Measurable Voltage Accuracy | ±0.1% of nominal voltage |
Measurable Voltage Resolution | 0.01 Volts |
Facility To Measure RMS Current | Available |
Measurable Current Range | 5.0000 kA AC (depends on current sensor in use) Ampere |
Measurable Current Accuracy | ±0.2 % rdg. ±0.1 % f.s. + current sensor accuracy |
Measurable Current Resolution | 0.01 mA ( Depend on Clamp Sensor Ampere |
Facility To Measure Active, Reactive And Apparent Power | Available |
Maximum Power That Can Be Measured | 300.00 W to 3.0000 MW KW |
Power Accuracy | ±0.2 % rdg. ±0.1 % f.s. + current sensor accuracy |
Power Resolution | 0.01 W Watt |
Facility To Measure Active, Reactive And Apparent Energy | Available |
Facility To Measure Sag(dips) And Swell(surge) | Available |
Facility To Measure Frequency | Available |
Frequency Range That Can Be Measured | 700 Hz Hz |
Facility To Measure Total Harmonic Distortion | Available |
Accuracy In Measurement Of Total Harmonics Distortion | 1 |
Resolution In Measurement Of Total Harmonics Distortion | 0.01 |
Facility To Measure Inter Harmonics | Available |
Order(n) To Which Facility To Measure Harmonics Available | up to 50th Order |
Facility To Measure Power Factor | Available |
Accuracy In Measurement Of Power Factor | 1 |
Facility To Measure Distortion Factor | Available |
Accuracy In Measurement Of Distortion Factor | 1 |
Facility To Measure Ripple Factor | Available |
Accuracy In Measurement Of Ripple Factor | 0 |
Facility To Measure Voltage And Current Unbalance | Available |
Facility To Measure Inrush Current | Available |
Facility To Measure Flicker | Available |
Facility To Measure Crest Factor | Available |
Measurable Crest Factor Range | Voltage : 2, Transient Over Voltage : 1, Current : 4 |
Measurable Crest Factor Accuracy | 1 |
Measurable Crest Factor Resolution | 1 |
Screen Memory | 1 |
Data Transfer Software Provided For Analysis On PC | Yes |
Internal Memory | 2 GB to 32 GB MB |
Type Of Battery Used | Lithium Battery |
Battery Backup | 3 Hours |
Power Supply(volts In AC) | 230 |
Weight Of The Analyser | 2.6 KG Grams |
Dimensions(LXWXH) | 3000 W× 2110 H × 680 D cm cmXcmXcm |
Provision For External SD Card | Yes |
Operating Temperature Range | 0 to 50 degree celsius |
Operating Humidity | 80 % |
All Connecting Cables And Accessories To Be Supplied Along With The Analyzer | Yes |
Details Of All Connecting Cables And Accessories To Be Supplied Along With The Analyzer | Instruction manual, Measurement guide, VOLTAGE CORD L1000 (8 cords, approx. 3 m each: 1 each red, yellow, blue, and gray plus 4 black; 8 alligator clips: 1 each red, yellow, blue, and gray plus 4 black), Spiral Tube, Input Cable Labels (for identifying channel of voltage cords and clamp-on sensors), AC ADAPTER Z1002, Strap, USB cable (1 m length), BATTERY PACK Z1003, SD MEMORY CARD (2GB) Z4001 |
Compliance To IEC 61000-4-30 | Yes |
Category Of Safety Rating | 600 V CAT III |
Dry Heat Test As Per IS :9000(Part 3/Section 5) | Yes |
Damp Heat(cyclic Test): Two Cycles Of 24 Hours Each As Per IS: 9000(Part 5/section 1) | Yes |
Cold Test At -20 Degree C For Four Hours As Per IS: 9000(Part2 /section 4) | Yes |
Availability Of Type Test Report From Central Govt. /NABL/ILAC Accredited Lab. To Prove Confirmity To The Specification. | Yes |
Type Test Report No. | NA |
TTC Report Date | NA |
Name Of Lab | NA |
Address Of Lab | NA |
Interface | SD Memory Card, USB, RS-232C and LAN |