Technical Specifications Features Description Capacity 1000VA/500W INPUT Voltage 230VAC Voltage Range 140-300VAC Frequency Range 50Hz OUTPUT AC Voltage Regulation Batt. Mode 10 Frequency Range Batt. Mode 50Hz 1 Transfer time Typical 4-8ms, Max. 10ms Waveform Batt. Mode Simulated Sine Wave BATTERY Battery Type Number 12V / 7AH x 2 Backup Time One PC Load 50 min. Typical Recharge Time 8 hours up to 90 capacity INDICATORS AC Mode Green Lighting Battery Mode Yellow Flashing Fault Red Lighting ALARM Battery Mode Sounding every 10 seconds Low Battery Sounding every seconds Overload Sounding every 0.5 seconds Fault Continuously sounding PHYSICAL Output Receptacles Input output x 4 Dimensions DxWxH mm 340 x 165 x 147 Net Weight Kgs 7.87 ENVIRONMENT Humidity 0-90 RH @ 0-400C non condensing Noise Level less than 40dB MANAGEMENT Optional USB/RS-232 Port Supports Windows 98/2000/2003/XP/Vista/2008.
Other Specifications Download Specification | |
---|---|
Rating In KVA | 1 KVA |
Technology | MOSFET-PWM |
Input Power | single phase 160V - 260V sinewave,50Hz |
Output Power | single phase 230V ±1% sinewave,50Hz |
Backup Time | 60 Minutes |
Minimum VAH | 1000 VAH |
Voltage Regulation From No Load To Full Load | 1 % |
Inbuilt Isolation Transformer | Yes |
20% Overload Limit For Minimum 10 Minutes | Yes |
50% Overload Limit For Minimum 1 Minutes | Yes |
Total Harmonic Distortion(THD) | 1 % |
Overall Efficiency | 90 % |
Type Of Battery | SMF-VRLA conforming to JISC:8702(Pt.I,II&III) |
Minimum Thickness Of M.S.Sheet Enclosure Duly Painted | 1.2 mm |
Degree Of Protection | IP21 |
Protection Of Over Voltage,Short Circuit & Over Load At UPS Output Terminal | Yes |
Protection For Under Voltage At Battery Terminal At 10.5V Per 12 V Battery. | Yes |
Maximum Overshoot And Under Shoot Of Output Rated Voltage | 4 |
Indicators For Mains Presence,Battery Charging And Discharging,Output Over Load, Low Battery Voltage | Yes |
Digital Metering In UPS For AC Input Voltage,Output AC Voltage,Current,Frequency,Battery Voltage And Current | Yes |
Movable Trolly For Batteries | Without |
Dry Heat Test : In Accordance With IS:9000 (part 3/sec.5)1977 (reaffirmed 2007) At 55 Degree C For 16 Hrs | Yes |
Damp Heat : In Accordance With IS:9000(part 5/sec.2)1981 At Temperature Of 40 Degree C,two Cycles Of (12+12) Hours Each 2007) | Yes |
Cold Test : In Accordance With IS:9000 (Part 2/Sec.4)1977 (Reaffirmed 2007) At -10 Degree C For 4 Hrs. | Yes |
Availability Of The Type Test Report From Central Govt. /NABL/ILAC Accredited Lab Covering All Technical Requirements. | Yes |
Type Test Certificate No. | n/a |
Type Test Certificate Date | n/a |
Name Of Lab | n/a |
Address Of Lab | n/a |
Supply & Commissioning | n/a |
Warranty | 1 Years |