ROLLABLE SOLAR CHARGER Its a portable battery charger suitable for applications requiring power for charging batteries of Li-ion,/ NiMh / NiCd, of less than 100 VAH capacity , used in electronic /communication/surveillance equipment in offline mode It consist of Rollable flexible thin layer Solar Panel , battery placed in casing , stand and standard accessories PV MODULE APV Module is Flexible Rollable of minimum 20 watt peak under Standard test Condition irradiance 1000 Watt/square metre, Mass of the air 15 , Temperature of panel 25C and roll over the casing when packed BThe PV module efficiency be minimum 12 CThin film rollable solar panel is made of CIGS DOuter covering on both sides of solar module is made of water repellent ETFE / suitable material covering both sides of solar module have anti reflective surface specular reflection on surface to be less than 05 measured at 670 nm with spectrophotometer CASING Casing and cap is made of Glass Filled Nylon / Polycarbonate Casing is circular with OD 95 mm , and thickness minimum 200 mm Rechargeable Maintenance free Li-ion / Lithium polymer / LiFe-Po4 battery ofminimum 100 VAH capacity at C5 rate housed inside casing It has Input Output Interface Connectors Displays , both housed separately on the two sides of the casing Equipment excluding accessories is rain resistant Equipment when in unfolded / laid condition works even if exposed to rain for 15 minutes Charge controller / electronics are housed inside the casing Input side has a Solar panel impit connector b LED indication for DC input c Numeric LED / LCD display of Battery Percentage through push button Output side has a 5V DC Twin / Dual USB output port b 144V DC output c Numeric LED / LCD display of AC voltage 15 variation through push button when connected to compatible DC-AC adapter accessorySTANDStand provide approx 30 deg angle from horizontal for fixing Solar panelIt easy assemble without tools, within five minutes Stand is made of Powder coated metal pipe , having plastic cap on ends holding the solar panel Suitable four locking / holding system in stand pipes is provided to prevent Solar panel from flying off in winds when installedESSENTIAL ACCESSORIES Each system be supplied with one each of following standard accessoriesDC-AC Adaptor 12V DC to 220 V AC, AC adaptor of minimum 125 Watt capacity with AC voltage display compatabilityAC-DC adopter / charger input 220 V AC , output suitable for charging battery in-liu of solar of minimum 1 Amp ratingMobile charger 5 in 1 USB mobile chargerPacking Bag Complete equipment including all essential accessories should be packed in a water resistant bag, with shoulder strap GENERAL FEATURES Complete system weight including all accessories is less than 350 kgs Volumetric space in packed condition including all essential accessories is less than 035 metres cube Run time test 100 watt bulb load once battery fully charged runs for minimum 60 minutes Suitable four locking / holding system in stand pipes is provided to prevent Solar panel from flying off in winds when installedSolar panel roll over the casing when in packed condition.
Other Specifications Download Specification | |
---|---|
System Type | Rollable |
Make & Model Of Solar Panel | FUTURE MIL 110 |
Type Of PV Module | ROLLABLE |
Frame Provided For Laying The Solar Panel | Yes |
Solar Panel Is Scratch Resistant | Yes |
Suitable For Charging Type Of Batteries (Battery Chemistry) | ALL TYPES OF BATTERIES LEAD ACID , LI-ION, NI-MH, NI-CD , LI-PO4 ETC |
Battery Voltage To Be Charged | 1.2V to 14.4V Volts |
Battery AH To Be Charged | 0.50AH TO 12 AH AH |
System Weight (including Accessories) | 3500 GRAMS Kg |
Maximum Over All Dimensions Of PV Module When Un Folded ( LengthxWidth) | 900 MM X 250 MM cm X cm |
Length Of Electric Chord Attached With Solar Panel | 2 MTRS meter |
Size After Folding PV Module | ROLLABLE PANEL cm X cm |
Folding Endurance Of Foldable Solar Panel | 50000 ROLLING |
PV Module (Wp) (min.) | 20 Watt |
PV Module Efficiency(min.) | 12 % |
PV Module Open Circuit Voltage | 20 Volts |
PV Module Short Circuit Current | 1 Amperes |
PV Module Rated Voltage | 18 Volts |
PV Module Rated Current | .9 Amperes |
PV Module Material | CIGS |
Type Of Connectors Provided For Charging | STANDARD CONNECTORS FOR CHARGING ALL MOD EQUIPMENTS LIKE HAND HELD RADIO SETS , MOTOROLA SETS , MOBILES, SAT PHONES, LAPTOPS, UAV , THERMAL IMAGER & NITE VISION BATTERIES ETC, INCLUDING 220V AC 3 PIN |
Charging (output) Voltage Range | 18 Volts |
Charging (out Put) Current Range | 0.9 Amperes |
Details Of Accessories Included | CARRYING BAG , DC-AC CONVERTOR , STANDARD CONNECTORS FOR CHARGING ALL MOD EQUIPMENTS LIKE HAND HELD RADIO SETS , MOTOROLA SETS , MOBILES, SAT PHONES, LAPTOPS, UAV , THERMAL IMAGER & NIGHT VISION BATTERIES ETC |
Water Resistant Bag For Packing Complete Equipment Including Accessories. | Yes |
Confirmity Of PV Module To Cold Temp. Test(Test No.20) As Per JSS:55555/2000 ( Revision-2) Or Equivalent | Yes |
Confirmity Of PV Module To Drop Test(Test No.13) As Per JSS:55555 / 2000 (revision-2) Or Equivalent | Yes |
Confirmity Of PV Module To Bump Test(Test No.5) As Per JSS:55555 / 2000 (revision-2) Or Equivalent | Yes |
Confirmity Of PV Module To Driving Rain Test(Test No.12) As Per JSS:55555 / 2000 (revision-2) Or Equivalent | Yes |
Confirmity Of PV Module To Dust Test(Test No.14) As Per JSS:55555/2000(revision-2) Or Equivalent | Yes |
Confirmity Of PV Module To Vibration Test(Test No.28) As Per JSS:55555 (revision-2) Or Equivalent | Yes |
Confirmity Of PV Module To Altitude Test(Test No.3) As Per JSS:55555/2000(revision-2) Or Equivalent | Yes |
Confirmity Of PV Module To Salt Corrossion Test(Test No.9) As Per JSS:55555/2000(revision-2) Or Equivalent | Yes |
Confirmity Of PV Module To High Temp. Test(Test No.17) As Per JSS:55555 / 2000 (revision-2) Or Equivalent | Yes |
Any Other Additional Information / Declaration | PRODUCT PROTECTED BY 2 PATENTS ISSUED BY GOVT OF INDIA . |
Confirmaty Of PV Module To Damp Test (Test No.10) As Per JSS:55555/2000 ( Revision-2) Or Equivalent | Yes |