GWINSTEK GDS-1102 A-U 100 MHz with a real-time sampling rate of 1GSa/s 2M points of memory, the GDS-1102A-U employs Memory Prime technology. Using Memory Prime technology, the GDS-1102A-U is able to overcome the problems associated with memory constraints. High sample rates, rarely found in traditional DSOs, can be maintained over longer periods of time, without effecting performance. the data logger can continue monitoring input signals and storing their waveform data in USB flash disk when trigger conditions are met, saving users effort to tracking signals manually and allowing them to analyze and observe waveform data afterwards. Coupled with the high resolution 5.7 colour TFT display, with user-friendly interface USB device and host port make the GDS-1000A series feature-rich.Prices indicated including GST. Standard Delivery Period is 30 Days.
Other Specifications Download Specification | |
---|---|
Type | Digital |
Operating System | Non -Windows |
Bandwidth Upgradability | No |
No. Of Analog Channels | 2 Number |
Digital Channels | No |
No. Of Digital Channels | NA Number |
Record Length Per Digital Channel Simultaneously | NA GS/sec |
Sampling Rate Per Digital Channel Simultaneously | NA Mega Points |
Min. Detectable Pulse Width | NA ns |
Memory Upgradability | No |
Segmented Memory Feature Availability | No |
Vertical Sensitivity | 500mV per Div to 10 V/div |
Vertical Resolution | 8 bits |
Coupling | AC, DC, GND |
Time Base Range | 1ns~50s |
Trigger Types | Edge , Video, Pulse , CH1, 2, Line, Ext |
Measurements | 27 Automatic Measurements Vpp, Vamp, Vavg, Vrms, Vhi, Vlo, Vmax, Vmin, Rise Preshoot/ Overshoot, Fall Preshoot/ Overshoot Freq, Period, Rise Time, Fall Time, + Width, – Width, Duty Cycle Voltage difference (ΔV) and Time difference (ΔT) between cursors Resolution: 6 digits, Accuracy: ±2% Signal source: All available trigger source except the Video trigger |
Frequency Analysis Feature | Yes |
In-built Frequency Counter | Yes |
In-built Function Generator | No |
Acquisition Modes | Auto, Normal, Single, TV, Edge, Pulse |
Display Type | Colour |
Display Size | 14.5 CM |
I/O Interface | USB HOST, USB DEVICE |
Standard Accessories To Be Supplied | Two 10X probes, Power Cord, Manual,to be supplied with Calibration Certificate |
Operating Temperature Range | 0°C to 50°C Degree C |
Operating Humidity (RH) | ≤80% % |
Power Supply | 230V +- 10% , 50Hz |
Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : 1. Dry Heat Test : 45 Deg C For 16 Hours As Per IS:9000/Pt.3/sec.5/1977 (reaffirmed In 2007) 2. Cold Test : 0 Deg C For 4 Hours As Per IS:9000/Pt.2/sec.4/1977 (reaffirmed In 2007) 3. Damp Heat Test: 95% RH At 40 Deg C, Two Cycles Of 24 Hours Each Separated By A Gap Of 4 Hours As Per IS:9000/Pt.5/sec. 1/1991 (reaffirmed In 2007) The Oscilloscopes Shall Be Checked Functionally Before And After Recovery Period Of 1-2 Hours Of The The Environmental Test Sequence As Above. Functional Tests Shall Include Switching ON And Calibration | yes |
Test Report No. | PMR |
Test Report Date | 01/08/2017 |
Name Of The Lab | FACTORY CALIBRATION |
Warranty | 5 Year |
Real Time Bandwidth | 100 MHz |
Record Length Per Analog Channel Simultaneously | 2 Mega Point Record Length Mega Point |
Sample Rate Per Analog Channel Simultaneously | 1 GSa/s GS/sec |
Waveform Update Rate | 4000 Waveforms/ |
Time Base Accuracy | 100 PPM |