Keysight MSOX3012T is 100MHz 2-Analog Channels and 16-digital channels, 5GSa/s Sampling Rate, 4Mpts Memory with 8.5 inch capacitive touch screen, exclusive hardware base zone touch trigger with two-zone support, update rate of 1 million wfm/s, standard Gated FFT and Segmented Memory. Integrated 3-digit Digital Voltmeter and 8-digit Counter-totalizer. Wide range of hardware based serial protocol decodes options available for future upgrade like I2C, SPI, UART,CAN,CAN-FD,CAN symbolic,SENT, LIN,FlexRay,I2S,MIL-STD1553, ARINC429 and Time-frequency domain correlation, 20MHz built-in Arbitrary waveform Generator and many more. MSOX3012T will be delivered with two nos. of 500MHz switchable passive probes, power cord, certificate of calibration, N2756A 16-digital channels MSO Cable, documentation CD.Standard 3 Year warranty and 3-Years Calibration Interval.Refer Keysight datasheet for detailed specifications.Prices indicated including GST@18 percent.Delivery period 6 weeks..
Other Specifications Download Specification | |
---|---|
Type | Mixed Signal |
Operating System | Non -Windows |
Bandwidth Upgradability | Yes |
No. Of Analog Channels | 2 Number |
Digital Channels | Yes |
No. Of Digital Channels | 16 Number |
Record Length Per Digital Channel Simultaneously | 2 Mpts GS/sec |
Sampling Rate Per Digital Channel Simultaneously | 1.25 Gsa/s Mega Points |
Min. Detectable Pulse Width | 5 ns ns |
Memory Upgradability | No |
Segmented Memory Feature Availability | Yes |
Vertical Sensitivity | 500mV per Div to 10 V/div |
Vertical Resolution | 8 bits |
Coupling | AC, DC, Ground on Screen |
Time Base Range | 5 ns/div to 50 s/div |
Trigger Types | Edge, Pulse, video, hardware based zone trigger, runt, setup/hold, pattern, burst etc. |
Measurements | 37 Built-in Automatic Measurement, math function-Two, displays FFT and one math simultaneously. Can be cascaded. Add, subtract, multiply, divide, differentiate, integrate, FFT, Ax + B, squared, square root, absolute value, common logarithm, natural logarithm, exponential, base 10 exponential, low pass filter, high pass filter, averaged value, smoothing, envelope, magnify, max hold, min hold, measurement trend, chart logic bus (Timing or State) |
Frequency Analysis Feature | No |
In-built Frequency Counter | Yes |
In-built Function Generator | No |
Acquisition Modes | Normal, Peak Detect, Averaging, High Resolution, Segmented |
Display Type | Colour |
Display Size | 8.5-Inch Capacitive Touch Display CM |
I/O Interface | USB Interface and LAN, VGA and GPIB Optional |
Standard Accessories To Be Supplied | Two Nos. of Passive Probe 10:1, Power Chord, Certificate of Calibration, CD Containing Manual and 16 Channel Logic Probe for MSO |
Operating Temperature Range | 0 to +55 °C Degree C |
Operating Humidity (RH) | Up to 80% RH at or below +40 °C % |
Power Supply | 230V +- 10% , 50Hz |
Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : 1. Dry Heat Test : 45 Deg C For 16 Hours As Per IS:9000/Pt.3/sec.5/1977 (reaffirmed In 2007) 2. Cold Test : 0 Deg C For 4 Hours As Per IS:9000/Pt.2/sec.4/1977 (reaffirmed In 2007) 3. Damp Heat Test: 95% RH At 40 Deg C, Two Cycles Of 24 Hours Each Separated By A Gap Of 4 Hours As Per IS:9000/Pt.5/sec. 1/1991 (reaffirmed In 2007) The Oscilloscopes Shall Be Checked Functionally Before And After Recovery Period Of 1-2 Hours Of The The Environmental Test Sequence As Above. Functional Tests Shall Include Switching ON And Calibration | yes |
Test Report No. | YES |
Test Report Date | YES |
Name Of The Lab | YES |
Warranty | 3 Year |
Real Time Bandwidth | 100 MHz |
Record Length Per Analog Channel Simultaneously | Standard 4 Mpts, Standard segmented memory Mega Point |
Sample Rate Per Analog Channel Simultaneously | 5 GSa/s half channels, 2.5 GSa/s all channels GS/sec |
Waveform Update Rate | 1000000 wfrm/s Waveforms/ |
Time Base Accuracy | 2 PPM |