× All the transactions performed on 2.0 is available here. To access Market click "Home".

led tl 4 t5 20 w batten 6500k (benlo bentec)(bl04bat20wt565k)

` 375.13

  • MRP: `750.00

SPECIFICATIONINPUT VOLTAGE RANGE -100V-300V, POWER FACTOR 0.90THD20, CRI75,SURGE PROTECTION2.5KV AVG LIFE 35000 HRS, BEAM ANGLE 180-320 DEG.FEATURES.LOW POWER CONSUMPTION,ELEGANT STUCTURE DESIGNED TO DISSIPATE HEAT , SOFT UNIFORM LIGHT, DRIVER EFFICIENCY 85 INSTANT START ELECTRONIC DRIVER.

  • Availability: 20,000 In Stock
  • Min. Qty. Per Consignee: 100
  • Led tube light power rating & corresponding Min Luminious flux - 20 Watt/2000 lumen
  • Colour Temperature - 6500 K
  • Light Source - SMD LED Chip
  • LED Chip Wattage (Individual) - 0 Watt
  • Lamp Shell material - Polycarbonate
Other Specifications Download Specification
LED Lamp Efficacy 6500 Lm/W
Led Tube Light Power Rating & Corresponding Min Luminious Flux 20 Watt/2000 lumen
Colour Temperature 6500 K
Light Source SMD LED Chip
LED Make 5013539
LED Chip Wattage (Individual) 0 Watt
Length Of Tube Light (Nominal) 1219.2 mm
Type Of Tube Light Cap G-13 Bi-pin
Lamp Shell Material Polycarbonate
LED Chip Efficacy 5013539 Lm/W
Colour Rendering Index(CRI) 80
Total Harmonics 15 %
Beam Angle 5013539 Degree
Driver Efficiency 85 %
Power Factor 5013539
Rated Voltage For Performance And Life 220-240 Volt
Operating Voltage Range 100-300 Volt
Ingress Protection In IP 5013539
EMC Test Yes
LED Tubelight Life Of 25,000hours Predicted As Per TM21 Report On Data Obtained As Per Test Conducted For 6000 Hours As Per LM80 Yes
Lumen Maintenance@25°C After 6000 Hrs 5013539 %
Certificare For Luminaire Photometric Data As Per LM79 Yes
Certificate No And Date Of Luminaire Photometric Data As Per LM 79 Report NA
Surge Voltage Withstand 2.5 KV
Compulsory Registration (CRS) BIS For Safety To IS 16102-I Yes
BIS Registration Certificate Under (CRS) No. & Date 5013539
Warranty For Free Replacement 3 Years
LED Fixture With Al Back, Front With Polycarbonate/Acrylic Diffuser More Than 85%efficiency Of Lig With
Temprature Cyling Test And Supply Voltage Switching Test (1)product Shall Be Subjected To Minus 10 Degree C For 1 Hour,then Switch To 50 Degree C For 1 Hour In Total 5 Cycles.(2)30 Sec ON And 30 Sec Off .At The End Of Test As Per (1) And(2) ,no Visual Damage Shall Be Observed And Light Should Alight For More Than 15 Min After The Test Yes

Price Dekho Price Dekho Price List in india