Boot Ankle Textile-Jungle Boot Direct Moulded PU Sole Colour Olive Green and Black.
Other Specifications Download Specification | |
---|---|
Conforming To FDDI (FOOTWEAR DESIGN & DEVELOPMENT INSTITUTE, A - 10 / A, Sector-24, NOIDA) Specification No. FDDI/SPEC/Jungle Boot/08:2014 (Revised), Approved By MHA Vide Their Letter No-U.II-98(Spec)/2012-13-Prov-9775 Dated 10/12/2014, And As Per Following Technical Requirements | YES |
Size | 8 |
Colour | Olive Green |
Mass Per Pair For Size-8 Shall Be 750 To 850 Gms (with Increase Or Decrease Of 50 Grams For Each Bigger And Smaller Size Respectively) | YES |
Leg Height For Size-8 Shall Be 160 Mm (with Increase Or Decrease Of 2 Mm For Each Bigger And Smaller Size Respectively) | YES |
Sole | Direct Moulded Polyurethane |
Minimum Thickness Of Sole | 4 mm |
Cleat Height | 2.5 mm |
Thickness Of Sole When Measured At Forepart From Outside With Side Wall | 20 mm |
Thickness Of Sole When Measured At Waist From Outside With Side Wall | 16 mm |
Thickness Of Sole When Measured At Heel From Outside With Side Wall | 35 mm |
Colour Of Sole And Toe Cap | Black ( For all other Boots) |
Upper Material | Upper shell consist of Polyester viscose fabric,Water Repellent as an outer layer and 100 % non-woven Nylon (cambrille type) lining as an inner layer. The two fabrics shall be adhered together with flexible adhesive and polyurethane foam of 5 mm thickness. |
Blend Composition Of Polyester Viscose Fabric Water Repellent | Polyester-80% Viscose-Remainder |
Binding Material Of Polyester Blended Fabric, Black Having Blend Composition Of Polyester-67%, Cotton-33% & Confirming To IS:15852-2009 For Colour Fastness To Light,washing & PH Value | YES |
Insocks | Covered with cambrille type non woven material black |
Thermoplastic Toe Puff And Counter Stiffner Thickness When Extacted From Boot Shall Be 1.7 Mm To 1.9 Mm | YES |
Full Chrome Leather For Toe Cap And Arch Piece Confirming To IS 5677-1986 For Heat Resistance, Colour Fastness To Rubbing Crocking, Solvent Extractable Substances, Water Soluble Matters, Chromium Contents & PH Value Of Water Soluble | YES |
Thickness Of Full Chrome Leather For Toe Cap And Arch Piece Shall Be 1.2 Mm To 1.8 Mm | YES |
Length Of Nylon Laces | 160 cm |
Width Of Laces | 6 mm |
Mass Per 10 Pairs | 125 g |
Breaking Load Of Laces ( 20 Cm Between Grips ) (Test Method- IS: 1969) | 750 |
Dye Fastness To Light (Test Method- IS: 2454) Shall Be Above 4 | YES |
Dye Fastness To Washing Shall Be Above 4 (Test Method- IS/ ISO 105-C10: 2006) (Test Condition As Per Table-2, Test Number-C(3)) | YES |
PH Value Of Aqueous Extract Shall Be 6.5 To 8.5 | YES |
Sewing Threads | Polyester Sewing thread confirming to IS 9543-1980 (Variety No- 7) |
Availability Of Test Report From NABL/ ILAC Accredited Or Central Government Lab To Prove Conformity Of Products To The Specification. | YES |
Test Report No. | ART-24-08/2017 |
Test Report Date | 22/08/2017 |
Name Of The Lab | AROMA LABORATORIES PVT LTD |
Address Of The Lab | 20A, CHANNAMAL PARK, PUNJABI BAGH(EAST), DELHI-26 |
Test Reports To Be Furnished To Buyer On Demand | YES |