Android based Point of Sale/ Hand Held Terminal - Adhaar Enabled / PCI , EMV Certified, IP 54/ ISO 786 Card Reader/ 5.5 Inches IPS Display 1280x720/ 1GB RAM/ 8GB Internal Storage expandable to 32GB/ Android/ Quad Core Processor 1.1GHZ/ Onscreen keypad/ Dual SIM 4G/LTE/3G/2G/ WIFI, BLUETOOTH/ GPS/ Micro USB Port/ Camera - 5MP/ Battery Backup of 8-10 Hrs/ Debit -Credit card reader/ integrated 2 inch Thermal Printer/STQC certified Finger Print Scanner/ Can drop test/ resistance 1.2 Mtr Drop Test on Concrete/ Camera for QR Code Reader/ Magnetic Card Reader/ Smart Card Reader/ Contact less Card Reader/ CE, EMV 4.3 L1 and L2, PCI, BIS/ Including Mobile Device management for Managing the Terminal Remotely..
Other Specifications Download Specification | |
---|---|
Display Size | 139.7mm mm |
Display Type | Scratch resistant multi point capacitive touch screen |
Display Resolution | 1280x700 Pixels |
Processor | Dual Core or higher ARM |
Processor Speed | 1.1 GHz |
Operating System | Android 5.1 or higher |
RAM | 1024 MB |
Inbuilt Storage (Flash Memory) | 8 or higher GB |
Storage Expandability Through Micro SD Card | 8 GB |
Integrated QRcode/ Barcode Reader | Not Available |
If Available, Scanning Speed | NA Scans/sec |
Camera (for Reading QRcode/ Barcode) | Available |
If Available, Camera Resolution | Minimum 5 Mega Pixel |
Key Pad | Soft in case of Touch Screen |
Interface | USB 2.0 or higher |
WI-fi Connectivity | Available |
Bluetooth Connectivity | Available |
GPS Connectivity | Available |
GSM SIM Slot | Available |
SAM Slot | Available |
Built-in Speaker | Available |
Battery Chemistry | Lithium Ion Battery |
Battery Capacity | 7.4/2200 MAh mAH mAH |
Battery Back Up (Device In Operation While All Function Of Device Active) | Minimum 8 Hours |
Connectivity (presence/absence) Indicator | Available |
Signal Strength Indicator | Available |
Battery Status Indicator | Available |
Accessories To Be Supplied With The Equipment | nbuilt 2" or Higher Thermal Printer integrated with Hand held Device/ Power Adaptor/ Data cable/ User mannual. |
Terminal Management | Device is remotely manageable in secured mode for Software/Patches updation through available communication |
Certification Available | BIS |
Drop /Free Fall Test | Drop /Free Fall test in unpacked, switched off and normal handling conditions (Height: 1 m , Total No. of falls:2) |
Vibration Test | Vibration Test should be in packed condition, switched off condition (10-150Hz, 0.15mm/2g, 10 sweep , cycles/axes) |
Bump Test | Bump test should be in packed condition, switched off condition. (1000 Bumps, 40g, in vertical position |
Dimensions (H X W X L) | 50x80x200 mm x mm x |
Weight | Less than 800Gms gms gms |
BIS Registration No. Under Compulsory Registration Scheme & Its Validity | R-41071447,Valid Till 20/08/2019 |
Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : (a) Dry Heat : For 16 Hrs. At A Temp. Of 55 Degree C In Accordance With IS:9000/part-3/section-5/1977 (reaffirmed In 2007). (b) Cold Test : For 4 Hrs. At A Temp. Of -10 Degree C In Accordance With IS:9000/part-2/section-4/1977 (reaffirmed In 2007). (c) Damp Heat (Cyclic)Test : For 2 Cycles Of 24 H Each At A Temp. Of 40 Degree C & 95% RH In Accordance With IS:9000/part-5/section-1/ 1991 (reaffirmed In 2007). After Environmental Conditioning Sequence As Above And A Recovery Period Of Two Hours, The Instrument Shall Be Checked For Complete Functional Parameters, Which Should Be With In Limits Including 1:1 Authentication (Test Reports Are To Be Furnished When Demanded By Buyer) | Yes |
Test Report No. | R-41071447 |
Test Report Date | 21-08-2017 |
Name Of The Lab | BIS |
Warranty | 3 Year |