SAFETY SHOE CONFORMING TO EN 20345/2011/ IS 15298/2011 DGMS PROTECTION LEVEL S1 CATEGORY- Design A-DESIGN -CONSTRUCTION - Special Injection Molded Construction For Enhanced Strength.SEAT REGION - CLOSEDHEIGHT OF UPPER - Less Than 113 MmTHREAD - Black 6 PlyEYELET - 6 Nos Aluminum PassivativeLACES - 90 CM Round Nylon Laces With Breaking Strength 55-60 KgWEIGHT - Approx. 1 Kg/Pair For Size 8.GENERAL- Toe-Caps Are Incorporated In Such A Way That They Cannot Be Removed. Footwear Is Lined In The Toe Section. The Lining At The Edge Of The Toe Caps Extends To More Than 5 Mm Beneath It, And More Than 10 Mm Behind It.CONSTRUCTION- Made From High Carb INTERNAL LENGTH OF TOE CAP- Above 39mmIMPACT RESISTANCE- When Tested At An Impact Energy Of 200 Joules, The Clearance Under The Toe Caps at Impact Is Above 14.0 Mm.COMPRESSION RESISTANCE - When Tested At A Compression Load Of 15 Kn, The Clearance Under The Toe Caps At Impact Above 14.0 MmCORROSION RESISTANCE - Exhibits Less Than 2.5 Mm Square Area Of Corrosion Under Test Conditions. CONSTRUCTION - Made From Buff Apollo Black Leather. THICKNESS - 2.00 Mm 0.2 MmTEAR STRENGTH - Above 120 N.WATER VAPOUR PERMEABILITY - Above 0.8 Mg/Cm2/H WATER VAPOUR CO-EFFICIENCY - Above 20.0 Mg/Cm Sq. WATER PENETRATION - NA CHROME VI CONTENT - No Harmful Chrome Content Detected TEAR STRENGTH - NATEAR STRENGTH - Above 15 N.MARTINDALE ABRASION RESISTANCE - The Lining Does Not Develop Holes When Exposed To 25,600 Dry Cycles, And 12,800 Wet Cycles WATER VAPOUR PERMEABILITY - Above 2.0 Mg/Cm2/H.WATER VAPOUR CO-EFFICIENCY- Above 30 Mg/Cm2/H. CONSTRUCTION - Soft Cambrel Grey Inner Lining TEAR STRENGTH - Above 15 N. MARTINDALE ABRASION RESISTANCE - The Lining Does Not Develop Holes When Exposed To 25,600 Dry Cycles, And 12,800 Wet Cycles WATER VAPOUR PERMEABILITY - Above 2.0 Mg/Cm2/H. WATER VAPOUR CO-EFFICIENCY - Above 20 Mg/Cm2/H. CONSTRUCTION - Insole Is Incorporated In Such A Way That It Cannot Be Removed. THICKNESS - 2.0 Mm. WATER ABSORPTION DESORPTION - Above 35 . Above 40 . ABRASION RESISTANCE - No Damage To The Insole When Exposed To 400 Cycles. MATERIAL COLOUR - THICKNESS- Above 2 Mm MARTINDALE ABRASION RESISTANCE - The Lining Does Not Develop Holes When Expose To 25,600 Dry Cycles, And 12,800 Wet Cycles CONSTRUCTION - Single Density Polyurethane COLOUR- BlackTHICKNESS- Above 6 MmTEAR STRENGTH- More Than 6 Kn/Mm.ABRASION RESISTANCE- Volume Loss Is Below 250 Mm3FLEXING RESISTANCE - Cut Growth Is Below 4 Mm.30,000 CYCLES HYDROLYSIS-150,000 CYCLES INTERLAYER BOND - NASTRENGTHUPPER OUTSOLE BOND STRENGTH- Above 4 N/Mm 3N/Mm In Case Of Leather TearingRESISTANCE TO FUEL OIL- Below 12.CLEATED OUTSOLE- More Than 45 Of Fore-Part Covered With Cleats After Conditioning In A Dry And Wet Atmosphere, TheENERGY- Above 20 Joules.ABSORPTION OF SEAT REGION ANTI SLIP - Co-Efficient Of Friction Is More Than 0.28 For Heel Region More Than 0.32 For Flat Region PROPERTY HEAT - Below 220 C. The Insulation Cannot Be Damaged Without Damaging The Footwear INSULATION OF SOLE COMPLEX COLD - Below 100 C. The Insulation Cannot Be Damaged Without Damaging The Footwear INSULATION OF SOLE COMPLEXHOT CONTACT - No Damage To TPU Sole When Exposed To A Temperature Of 1500 C For 1 Minute. PU SOLE NOTE-PLEASE IGNORE BELOW SPECIFICATION.

• Availability: 500 In Stock
• Min. Qty. Per Consignee: 50

• Product Id: 64520
• Sold by: 1 Seller(s)

• Type - General purpose safety shoes (Type 1)
• Design - Other designs
• Upper leather colour - Black
• Upper leather print - Other print
• Insole material - Chrome fibre board