1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
Hydraulic oil centrifugal system to remove solid contamination only. It is suitable to achieve desired NAS values..
| Other Specifications Download Specification | |
|---|---|
| Mode Of Working | Offline |
| Type | Portable |
| Type Of Oil For Which Machine Is To Be Used For Cleaning | Hydraulic Oil |
| Type Of Cleaning | Removal of Solid Contamination Only |
| Nominal Flow Rate | 2000 LPH |
| Centrifuge Pump Flow Rate | 25 LPM |
| Centrifuge Motor Capacity | 0.5 HP |
| Centrifuge Make Of Motor | others Confirming to IS 325:1996 reaffirmed 2007 with ISI Marked |
| Suction Pump Flow Rate | 50 LPM |
| Suction Pump Motor Capacity | 2 HP |
| Make Of Motor(Suction Pump) | others Confirming to IS 325:1996 reaffirmed 2007 with ISI Marked |
| Discharge Pump Flow Rate | 50 LPM |
| Discharge Pump Motor Capacity | 2 HP |
| Make Of Motor( Discharge Pump) | others Confirming to IS 325:1996 reaffirmed 2007 with ISI Marked |
| Dirt Holding Capacity | others grams |
| Dirt Holding Capacity( For Others) | 5000 grams |
| Minimum Size Of Dirt( Including Metallic ,Non Metallic ,Suspended Soild Particle ) | upto 5 micron |
| Length Of Inlet Wire Braided Hose Pipe | 5000 mm |
| Diameter Of Inlet Wire Braided Hose Pipe | 25 mm |
| Length Of Outlet Wire Braided Hose Pipe | 5000 mm |
| Diameter Of Outlet Wire Braided Hose Pipe | 25 mm |
| Vacuum Pump For First Stage | No |
| Vacuum Pump For Second Stage | No |
| Vacuum Pump Motor Capacity ( For First Stage ) | NA HP |
| Vacuum Pump Motor Capacity ( For Second Stage ) | NA HP |
| Vacuum Booster For First Stage | No |
| Vacuum Booster For Second Stage | No |
| Vacuum Booster Motor Capacity ( For First Stage ) | NA HP |
| Vacuum Booster Motor Capacity ( For Second Stage ) | NA HP |
| Vacuum Blower | No |
| Vacuum Blower Motor Capacity | NA hp |
| Moisture Separator | No |
| If Yes Then Moisture Separating Capacity (otherwise Put NA) | NA ml |
| Moisture Seperator Capacity (for Others ) | NA ml |
| Operating Pressure ,Max | upto 5 Bar |
| Operating Temperature | upto 60 Degree Celcius |
| Heating System | Yes |
| Heater Capacity | Heating NOT REQUIRED kw |
| Degassing Chamber | Yes |
| Dimensions Of Degassing Chamber (Diameter X Height) | Degassification NOT REQUIRED mm x mm |
| Capacity Of Degassing Chamber | NA ltrs |
| Ionic Reaction Cartridge | No |
| Oil Reclamation Cartridge | No |
| Water Adsorption Cartridge | No |
| Filter Cartridge ( For Solid Contamination Removal Only) | Consumable |
| Magnetic Strainer | No |
| Length Of The Centrifugal Oil Cleaning Machine | 1165 approx mm |
| Width Of The CentrifugalOil Cleaning Machine | 600 approx mm |
| Height Of The Centrifugal Oil Cleaning Machine | 1050 approx mm |
| Weight Of The Centrifugal Oil Cleaning Machine | 1200 approx Kg |
| Make Of Control Panel (All Parts) | Others Confirming to IS |
| Dimensions Of Panel Box Confirming To IS 10322/1982Reaffirmed 2005( Length X Width X Height ) | others mm x mm x mm |
| If Others Then Specify The Dimensions In LxWx H) | 600 X 250 X 550 approx mm x mm x mm |
| Thickness Of Panel Box Confirming To IS 10322/1982Reaffirmed 2005 | 250 approx mm |
| Online Moisture PPM Sensor | No |
| Tramp Oil Skimmer | No |
| Flowmeter | Yes |
| Voltmeter (0-500 V) With Inbuilt Selector Switch | Yes |
| Control Transformer | Yes |
| Ammeter Digital 0-20 Amps | Yes |
| Hours Counter Meter | Yes |
| Indicator Light 3-ph | Yes |
| No. Of Push Button | 4 |
| Legent Plate 3mm Thick | Yes |
| MCB TP 10-32 Amp | Yes |
| MCB SP 2- Amp For Volt/Cont | Yes |
| 12 Amp Contactor 3 Pole | Yes |
| O/L Relay 4-6.5 Amp | Yes |
| Terminal Block 2.5 Mm | Yes |
| Protection Relay Model -VSP-D1 | Yes |
| Over Load Trip Indication 22.5 Mm Dia | Yes |
| PVC Gland 13.5 /16x4x1.5 Mm | Yes |
| Cable 4Cx 1.5 Mm(5 Meter) | Yes |
| Machine Enclosure | Open Type |
| Machine Wheels | Castor |
| Lsit Of Standards Accessories Of Panel Box With Numbers To Be Provided | Indicator Light 3 phase - 3 Nos. Volt meter - 1 Nos. Amp. meter - 1 Nos. Hour Counter - 1 Nos. Push Button - 4 Nos. MCB TP 32 Amp - 1 Nos. MCB SP 6 Amp - 3 Nos. Contractor - 12 Amp 3 pole 2 Nos. O/L Relay - 2.5-4 Amp - 2 Nos. Protection relay - VSP- D-1 Cable Wire - 4C X 1.5mm2 |
| Availability Of Test Report From Central Govt./NABL/ILAC Acredited Lab To Prove Confirmity To Specification | Yes |
| Test Report No. | 2434-R |
| Test Report Date | 25-Oct-2013 |
| Name Of The Lab | Narang Metallurgical & Spectro Services |
| Address Of The Lab | New Delhi |
Price Dekho Price List in india© 2018 GeM All rights reserved.
