Keysight TechnologiesDSOX1102G DSO 70MHz 2CH InfiniiVision 1000X-Series oscilloscopes are engineered to give you quality, industry-proven technology at unbelievably low prices. Now its easy to get professional measurements and accessible expertise at your fingertips. Dont settle for less and test to impress. Keysight Model DSOX1102G 70MHz Bandwidth, 50000 waveform/s update rate, record length 1Mpts,Segmented Memory,Mask/Limit Test for pass/fail analysis,built 3-digit Digital Voltmeter,Frequency Counter,Integrated 20MHz FunctionGenerator provides stimulus output of sine, square, ramp, pulse, DC and noise waveforms to your device under test, with AM/FM/FSK Modulation,Built-in Help Training Signals.Lowest Vertical Sensitivity500microV/Div.Automatic Measurement including math,FFT,BodePlot,USBInterface, 3Yearwarranty. Optional analog bus and protocol triggering/decode and bandwidth upgrade available. Refer Keysight datasheet for detailed specifications.Prices indicated including GST@18perc.
Other Specifications Download Specification | |
---|---|
Type | Digital |
Operating System | Non -Windows |
Bandwidth Upgradability | Yes |
No. Of Analog Channels | 2 Number |
Digital Channels | No |
No. Of Digital Channels | NA Number |
Record Length Per Digital Channel Simultaneously | NA GS/sec GS/sec |
Sampling Rate Per Digital Channel Simultaneously | NA Mega Points Mega Points |
Min. Detectable Pulse Width | NA ns ns |
Memory Upgradability | No |
Segmented Memory Feature Availability | Yes |
Vertical Sensitivity | 500mV per Div to 10 V/div |
Vertical Resolution | 8 bits |
Coupling | AC, DC, Ground on Screen |
Time Base Range | 5 ns/div to 50 s/div |
Trigger Types | Edge, pulse width, video, pattern/state, External |
Measurements | 24 Automatic Measurement in single snap shot, Peak-to-peak, maximum, minimum, amplitude, top, base, overshoot, pre-shoot, average- N cycles, average-full screen, DC RMS-N cycles, DC RMS-full screen, AC RMS-N cycles, AC RMS-full screen & standard deviation, Period, frequency, counter, + width, - width, +duty cycle, -duty cycle, bit rate, rise time, fall time, delay, phase, X at min Y, X at max Y |
Frequency Analysis Feature | Yes |
In-built Frequency Counter | Yes |
In-built Function Generator | Yes |
Acquisition Modes | Normal, Peak Detect, Averaging, High Resolution |
Display Type | Colour |
Display Size | 7 Inches WVGA Display CM CM |
I/O Interface | USB Interface |
Standard Accessories To Be Supplied | Two Nos. 1:1/10:1 Switchable 200MHz Passive Probe, Power Chord |
Operating Temperature Range | 0 to +50 °C Degree C Degree C |
Operating Humidity (RH) | Up to 95% RH at or below +40 °C non condensing % % |
Power Supply | 230V +- 10% , 50Hz |
Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : 1. Dry Heat Test : 45 Deg C For 16 Hours As Per IS:9000/Pt.3/sec.5/1977 (reaffirmed In 2007) 2. Cold Test : 0 Deg C For 4 Hours As Per IS:9000/Pt.2/sec.4/1977 (reaffirmed In 2007) 3. Damp Heat Test: 95% RH At 40 Deg C, Two Cycles Of 24 Hours Each Separated By A Gap Of 4 Hours As Per IS:9000/Pt.5/sec. 1/1991 (reaffirmed In 2007) The Oscilloscopes Shall Be Checked Functionally Before And After Recovery Period Of 1-2 Hours Of The The Environmental Test Sequence As Above. Functional Tests Shall Include Switching ON And Calibration | yes |
Test Report No. | DSOX1102GCN57096373 |
Test Report Date | 24-FEB-2017 |
Name Of The Lab | Keysight Technologies Malaysia |
Warranty | 3 Year |
Real Time Bandwidth | 70 MHz |
Record Length Per Analog Channel Simultaneously | 1 Mpts Mega Point Mega Point |
Sample Rate Per Analog Channel Simultaneously | 1 GSa/s GS/sec GS/sec |
Waveform Update Rate | 50000 wfrm/s Waveforms/ Waveforms/ |
Time Base Accuracy | 50 PPM |