LED Tube Aluminium Extrusion Environment friendly, energy saving, T8 LED tube, with aluminium extrusion heat sink, for optimum performance, with high luminous efficacy an easy replacement of 36 W. Available in 18 Watt.
Other Specifications Download Specification | |
---|---|
LED Lamp Efficacy | 100 Lm/W |
Led Tube Light Power Rating & Corresponding Min Luminious Flux | 18 Watt/1800 lumen |
Colour Temperature | 6500 K |
Light Source | SMD LED Chip |
LED Make | OSRAM/EDISON/EVERLITE |
LED Chip Wattage (Individual) | 0.2 Watt |
Length Of Tube Light (Nominal) | 1219.2 mm |
Type Of Tube Light Cap | G-13 Bi-pin |
Lamp Shell Material | Glass |
LED Chip Efficacy | 130 Lm/W |
Colour Rendering Index(CRI) | 80 |
Total Harmonics | 15 % |
Beam Angle | 120 Degree |
Driver Efficiency | 90 % |
Power Factor | .9 |
Rated Voltage For Performance And Life | 220-240 Volt |
Operating Voltage Range | 100-300 Volt |
Ingress Protection In IP | 20 |
EMC Test | Yes |
LED Tubelight Life Of 25,000hours Predicted As Per TM21 Report On Data Obtained As Per Test Conducted For 6000 Hours As Per LM80 | Yes |
Lumen Maintenance@25°C After 6000 Hrs | 80 % |
Certificare For Luminaire Photometric Data As Per LM79 | Yes |
Certificate No And Date Of Luminaire Photometric Data As Per LM 79 Report | 12/12/2016 |
Surge Voltage Withstand | 2.5 KV |
Compulsory Registration (CRS) BIS For Safety To IS 16102-I | Yes |
BIS Registration Certificate Under (CRS) No. & Date | 12/12/2016 |
Warranty For Free Replacement | 3 Years |
LED Fixture With Al Back, Front With Polycarbonate/Acrylic Diffuser More Than 85%efficiency Of Lig | Without |
Temprature Cyling Test And Supply Voltage Switching Test (1)product Shall Be Subjected To Minus 10 Degree C For 1 Hour,then Switch To 50 Degree C For 1 Hour In Total 5 Cycles.(2)30 Sec ON And 30 Sec Off .At The End Of Test As Per (1) And(2) ,no Visual Damage Shall Be Observed And Light Should Alight For More Than 15 Min After The Test | Yes |