× All the transactions performed on 2.0 is available here. To access Market click "Home".

lathe machine (ami)(ami)

` 212,220.00

  • Offered Price: ` 235800.00
  • MRP: `262000.00

SS and SC cente lathe all geared and having centre height 150mm and centre distance 1000mm along with 4 jaw chucks, auto feed system, safety gaurds, taper turning attachement, motorized coolant system and lightning arrangements with standard accessories...

  • Availability: 10 In Stock
  • Min. Qty. Per Consignee: 1
  • Lathe Machine Confirming to IS 210 :1993 with latest amndmt. - Yes
  • Manually Operated Lathe - Yes
  • Geared Mechanism - Yes
  • Type - Standard
  • Center Height - 150 mm
Other Specifications Download Specification
Lathe Machine Confirming To IS 6893-1988part 1 With Latest Amndmt. Yes
Lathe Machine Confirming To IS 210 :1993 With Latest Amndmt. Yes
Manually Operated Lathe Yes
Geared Mechanism Yes
Distance Between Centers (mm) X Swing Over Bed (mm) 1000 x 300
Type Standard
Distance Between Centres 1000 mm
Swing Over Bed 300 mm
Center Height 150 mm
Swing Over Cross Slide 190 mm
Swing Over Carriage Wing 120 mm
Swing In Gap 50 mm
Width Of Gap In Front 150 mm
Type Of Bed centre lathe
Length Of Bed 1000 mm
Width Of Bed 450 mm
Gap In Bed 350 mm
Rapid Transverse Of Saddle 00 mm
Rapid Transverse Of Cross Slide 00 mm
Maximum Feed Force 150 N
Maximum Facing Diameter 150 mm
Maximum Weight Of Workpiece That Can Be Held Between Chuck And Supported By Live Centre 100 kg
Maximum Weight Of Workpiece That Can Be Held Between Chuck And Supported By Dead Centre 150 kg
Torque ,Maximum On Spindle 500 Nm
Type Of Spindle TAPER
Size Of Spindle 60 mm
Type Of Spindle Nose TAIL
Taper Bore In Spindle As Per IS 2582-1972 With Latest Amndmt. MT-3
Taper Bore In Spindle Sleeve As Per IS1715-1986 With Latest Amndmt. MT-3
Bore In Spindle 40 mm
No. Of Spindle Speed In Forward Direction 2
No. Of Spindle Speed In Reverse Direction 2
Spindle Speed Range In Forward Direction 4
Spindle Speed Range In Reverse Direction 4
Type Of Chuck 4 Jaw Independent
Diameter Of Chuck ,Maximum 5 mm
Diameter Of Chuck ,Minimum 5 mm
Travel Of Cross Slide 00 mm
Travel Of Top Slide 00 mm
Type Of Tool Holder HANDLE
Tool Shank Size As Per IS 1983:1958 With Latest Amndmt.(mm X Mm) 25*25
Tail Stock Sleeve Diameter 00 mm
Tail Stock Spindle Taper As Per IS 1715:1986 With Latest Amndmt. 00
Maximum Offset Of Tailstock On Either Side Of Center Line 00 mm
Sleeve Travel Type ( Tail Stock) Manual
Travel Of Sleeve 00 mm
Lead Screw Diameter 25 mm
Lead Screw Pitch 00 mm
Lead Screw Feed Range ( Longitudnal Mm/min) 00
Lead Screw Feed Range ( Cross In Mm/min) 00
Metric Thread Range In Mm 00
British Thread Range In TPI NA
Module Of Thread 00 mm
Diameteral Pitch 40 mm
Rapid Traverse Motor Power In Kw 0.746 kw
Type Of Cooling COOLANT
Coolant Pump Output As Per IS 2161 :1962 With Latest Amndmt. 6 kw
Coolant Pump Speed In Rev/min 250
Coolant Pump Discharge At Maximum Working Height As Per IS 2161 :1962 With Latest Amndmt.in L/min 005
Type Of Lubrication MANUAL
Length Of Lathe Machine 1500 mm
Width Of Lathe Machine 450 mm
Height Of Lathe Machine 1200 mm
Weight Of Lathe Machine With Electrical And Standards Accessories 400 kg
Noise Emitted By Machine As Per IS 10998:1984with Latest Amndmt. 78 dB
Mechanical Guarding As Per IS 9474 :1980 With Latest Amndmt. Yes
Colour Of Lathe Machine As Per IS 5 :1978with Latest Amndmt. GREY,BLUE,GREEN
In Possession Of Technical Evaluation Report As Per IS :11118 Yes
Lead Screw -Ground Profile& Pitch Accuracy 0.03 Mm Over A Length Of 300 Mm. Yes
Machine Confirming Full Power Cutting Load Test To Full Length Turning Capacity Of Machine Yes
Lubrication System Requirement As Per IS:11118 Yes
Cooling System Requirement As Per IS :11118 Yes
Positioning Accuracy Meets The Minimum Requirement As Per IS:1878 For Cumulative Error Yes
Positioning Accuracy Meets The Minimum Requirement As Per IS:1878 For Repeatibility Yes
Positioning Accuracy Meets The Minimum Requirement As Per IS:1878 For Backlash Yes
Positioning Accuracy Meets The Minimum Requirement As Per IS:1878 For Minimum Possible Requirement Yes
Geometric Accuracy Test Of General Purpose Parallel Lathe Machines As Per IS 1878-1971 With Latest Amndmt. Yes
Geometric Accuracy Test Of Precision Lathe Machines As Per IS 6040-1972 With Latest Amndmt. Yes
Machine Bed & Tail Stock Casting Grade Confirming To FG-260 With Hardness 180-230BHN As Per IS 11118-1997 With Latest Amndmt. Yes
Tailstock Sleeve Case Hardening Steel 15Ni7Cr4M02 ,, Hardened And Ground To A Hardness Of 58-62 HRCas Per IS 1118-1997 With Latest Amndmt. Yes
Head Stock Drive Gears Confirming To Alloy Steel Material Specification 15 Ni 7 Cr 4 M02 , Hardened 58-62 HRC And Profile Ground With 0.8 Micron Surface Roughness Ra Value Yes
Main Spindle Confirming To C2R Grade Forged Steel And Hardened 58-62 HRC. / Ground With 0.8 Micron Surface Roughness Ra Value Yes
Main Spindle Bearing Confirming Pre-loaded GAMET/TIMKEN Make Spindle Bearing High Precision Class Double Row Taper Roller Bearings At Front & Single Row Taper Roller Bearing At Back Yes
Machine Confirming Dynamically Balanced Spindle And Other Parts Rotating With Peripheral Speed Of More Than 3m/sec Yes
Spindle Forward/Reverse Drive Transmission Through Hydraulic Friction Clutch Yes
"Electric Equipment I.e. Motor And Control Gear Suitable For Operation On 415 V, 3 Phase, 50 Hz., 4 Wire, A.C.supply With Suitable Ammeter " Yes
DRIVING PLATE WITH PEG Yes
Coolant Equipment & Swarf Tray Yes
SPLASH GAURD : Yes
SPINDLE REDUCTION SLEEVE: Yes
60Deg.DEAD CENTRE-2 Nos.: Yes
ROTATING CENTE-1Nos.: Yes
QUICK CHANGE TOOL POST WITH TOOL HOLDERS Yes
QUICK INDEXIBLE SQUARE TOOL POST Yes
SET OPERTING INSTRUCTION MANUAL& A SET OF OPERATING TOOLS. Yes
3Jaw Self Centring Chuck Yes
Precision 3 Jaw Self Centring Chuck ( Hydraulic /Pneumatic Complete Chuck ) No
Chuck Gurad Yes
Rear Tool Post Yes
Universal Face Plate Yes
Precision Face Plate Yes
Cast Iron Face Plate Yes
Collet Chuck & Collets. Yes
Rear Tool Holder. Yes
Steady Rest. Yes
Roller Steady Rest Yes
Follow Rest Yes
Longitudinal Stop. Yes
Roller Stop. Yes
Taper Turning Attachment. Yes
A Set Of Change Gear For DP Threads. Yes
Multi Copying Attachment Yes
Machine Lamp Yes
Swraf Tray Complete With Coolant Equipment Yes
Four Jaw Chuck Yes
Availability Of Drawing For Foundation Yes
Warranty 1 Years
Annual Maintenance Contract For Machine Yes
Period Of AMC 0 Years
Availability Of Test Report From Central Govt./NABL/ILAC Acredited Lab To Prove Confirmity To Specification Yes
Test Report No. 1546
Test Report Date 26/10/2017
Name Of The Lab QMS CERTIFICATION
Address Of The Lab NEW DELHI
Purpose Classification General Purpose
Lathe Machine Type Center Lathe
Main Motor Power ( For Light Duty Lathe ≥ 3kw,For High Speed Precision Lathe ≥ 11kw, For Heavy Duty Lathe ≥ 18kw) 3 kw
Erection And Commisioning Charges Included In Offered Prices Without Foundation Yes
Spindle Forward/Reverse Drive Transmission Through Electro Magnetic Double Clutch Yes
Nature Of Duty Of Operation Of Lathe Light Duty Lathe

Price Dekho Price Dekho Price List in india