Keysight S-Series 4GHz Mixed Signal Oscilloscope incorporate 4-Analog plus 16-digital Channels with new 10-bit ADC and low-noise industry best signal integrity, solid state drive for fast boot-up, 15Inch capacitive touch display for easy touch capability and high-powered motherboard for fast processing. Capture a longer signal trace with 20GSa per sec max sample rate and 50Mpts per channel of standard memory.Get superior signal integrity with system ENOB of 7.4 bits and 10-bit analog-to-digital converter ADC,Low-noise front end for precision signal viewing, 90microV noise at 1mV per div and 1GHz bandwidth, System ENOB values in excess of 8, SFDR values down to minus 73 dBC, 2mV per div vertical scaling supported in hardware, Low intrinsic jitter. Offered Model MSOS404A having 4 no. 500MHz passive probe,keyboard, mouse,16-Channel Logic Probe etc.Standard 3 year warranty.Refer Keysight datasheet for detailed specifications.Prices indicated including GST@18 percent.Delivery period 60 days.
Other Specifications Download Specification | |
---|---|
Type | Mixed Signal |
Operating System | Windows |
Bandwidth Upgradability | Yes |
No. Of Analog Channels | 4 Number |
Digital Channels | Yes |
No. Of Digital Channels | 16 Number |
Record Length Per Digital Channel Simultaneously | 128/64 Mpts with 2 GSa/s, 64/32 Mpts with sampling < 2 GSa/s (single/repetitive mode) GS/sec |
Sampling Rate Per Digital Channel Simultaneously | 2 GSa/s Mega Points |
Min. Detectable Pulse Width | 2 ns ns |
Memory Upgradability | Yes |
Segmented Memory Feature Availability | Yes |
Vertical Sensitivity | 1mV/Div to 5 V/Div |
Vertical Resolution | 10 bits |
Coupling | AC, DC and Ground on Screen |
Time Base Range | 5ps/div to 20 s/div |
Trigger Types | Edge, pulse width, glitch, line, runt, timeout, setup/hold, window, protocol, zone-qualified. |
Measurements | >50 Built -In Automatic Measurement with up to 16 independent functions, upto 20 simultaneous measurements. Peak-to-peak, minimum, maximum, average, RMS, amplitude, pulse top, pulse base, pulse amplitude, Rise time, fall time, period, frequency, positive width, negative width, duty cycle, Tmin, Tmax, Tvolt, delta time, channel-to-channel phase, burst width, burst period, burst interval, setup time,hold time, FFT frequency, FFT magnitude, FFT delta frequency, FFT delta magnitude and many more. |
Frequency Analysis Feature | No |
In-built Frequency Counter | No |
In-built Function Generator | No |
Acquisition Modes | Sample, peak detect, Average, high resolution, Segmented |
Display Type | Colour |
Display Size | XGA 15 capacitive touch screen display with 16 grids CM |
I/O Interface | USB, LAN, VGA |
Standard Accessories To Be Supplied | Four 500-MHz passive probes Probe, accessory pouch, I/O libraries suite, Localized power cord, front panel cover, 8 GHz BNC calibration cable, Keyboard and mouse, User guide and programmers guide ship on oscilloscope drive |
Operating Temperature Range | 5 to 40 degree C Degree C |
Operating Humidity (RH) | up to 90 Percent relative humidity (non-condensing) at +40 Degree C % |
Power Supply | 230V +- 10 , 50Hz |
Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : 1. Dry Heat Test : 45 Deg C For 16 Hours As Per IS:9000/Pt.3/sec.5/1977 (reaffirmed In 2007) 2. Cold Test : 0 Deg C For 4 Hours As Per IS:9000/Pt.2/sec.4/1977 (reaffirmed In 2007) 3. Damp Heat Test: 95% RH At 40 Deg C, Two Cycles Of 24 Hours Each Separated By A Gap Of 4 Hours As Per IS:9000/Pt.5/sec. 1/1991 (reaffirmed In 2007) The Oscilloscopes Shall Be Checked Functionally Before And After Recovery Period Of 1-2 Hours Of The The Environmental Test Sequence As Above. Functional Tests Shall Include Switching ON And Calibration | yes |
Test Report No. | PENANG4254782-5147769-1 |
Test Report Date | 07-NOV-2017 |
Name Of The Lab | Keysight Technologies Penang Malaysia |
Warranty | 3 Year |
Real Time Bandwidth | 4000 MHz |
Record Length Per Analog Channel Simultaneously | 100 Mpts (2 channels), 50 Mpts (4 channels) Mega Point |
Sample Rate Per Analog Channel Simultaneously | 20 GSa/s (2 channels), 10 GSa/s (4 channels) GS/sec |
Waveform Update Rate | 250000 wfrm/s Waveforms/ |
Time Base Accuracy | 0.1 PPM |