1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
Expand Your Measurement Range with Increased Flexibility. You can measure around awkward sized conductors with the Fluke 376 True RMS Clamp Meter with iFlex, expanding your measurement range to 2500 A AC. With True RMS voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both AC and DC modes.The Fluke 376 is the direct replacement for the Fluke 337 Clamp Meter.iFlex Flexible Current Probe expands the measurement range to 2500 A AC-CAT IV 600 V, CAT III 1000 V-True RMS AC voltage and current for accurate measurements on non-linear signals-Min, max, average and Inrush recording to capture variations automatically-Integrated low pass filter and state-of-the-art signal processing allows for use in noisy electrical environments while providing stable readings-Proprietary Inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it-Ergonomic design fits in your hand..
| Other Specifications Download Specification | |
|---|---|
| Type | Hand Held |
| Display | Backlit |
| Measurement Type | True RMS |
| AC Current Measurement Range | 0 to 999.9 Ampere |
| AC Current Measurement Accuracy | + or - 2 % |
| AC Voltage Measurement Range | 0 to 1000 Volt |
| AC Voltage Measurement Accuracy Upto 600 Volts | + or - 1 % |
| AC Voltage Measurement Accuracy Beyond 600 Volts | + or - 1.5 % |
| Inrush Current (Integration Time) | 100 millisecon |
| DC Current Measurement Range | 0 to 999.9 Ampere |
| DC Current Measurement Accuracy | + or - 2 % |
| DC Voltage Measurement Range | 1000 Volt |
| DC Voltage Measurement Accuracy | + or - 1 % |
| Resistance Measurement Range | 0 to 4000 Ohm |
| Resistance Measurement Accuracy | + or - 1.5 % |
| Continuity | < or = 30 Ohm |
| Frequency Measurement Range | 10 to 400 |
| Frequency Measurement Accuracy | + or - 0.5 |
| Jaw Size (Dia In Closed State) | 34mm |
| Satety Rating | Category III 600 V of IEC 61010 -2-D31 |
| Operating Temperature Range | -10 C +50 C Degree C |
| Operating Humidity (RH) | 90 RH % |
| Power Requirements | Battery Operated |
| Safety Certification (Certificate To Be Furnished When Demanded By Buyer) | UL |
| Standard Accessories Supplied With The Equipment | True-rms AC/DC Clamp Included accessories: 18-inch iFlex flexible current probe Coated instruction card Safety information sheet Soft carrying case TL75 test leads Two AA Alkaline batteries |
| Dimensions (H X W X L) | 246 mm x 83 m x 43 mm mm x mm x |
| Weight | 388gm gms |
| Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : (a) Dry Heat : For 16 Hrs. At A Temp. Of 55 Degree C In Accordance With IS:9000/part-3/section-5/1977 (reaffirmed In 2007). (b) Cold Test : For 4 Hrs. At A Temp. Of -20 Degree C In Accordance With IS:9000/part-2/section-4/1977 (reaffirmed In 2007). (c) Damp Heat (Cyclic)Test : For 2 Cycles Of 24 H Each At A Temp. Of 40 Degree C & 95% RH In Accordance With IS:9000/part-5/section-1/ 1991 (reaffirmed In 2007). After Environmental Conditioning Sequence As Above And A Recovery Period Of Two Hours, The Instrument Shall Be Checked For Complete Functional Parameters, Which Should Be With In Limits.(Test Reports Are To Be Furnished When Demanded By Buyer) | Yes |
| Test Report No. | NABL14 |
| Test Report Date | 12.01.2018 |
| Name Of The Lab | NABL APPROVED LAB |
| Warranty | 3 Year |
Price Dekho Price List in india© 2018 GeM All rights reserved.
