1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
Anritsu latest generation of handheld spectrum analyzers is the MS2720T Spectrum Master. This represents the company s highest performance Handheld Spectrum Analyzer. Continuous frequency coverage from 9 kHz to 32 GHz for MS2720T-0732 gives the wireless professional the performance needed for the most demanding measurements. Whether your application is spectrum monitoring, hidden signal detection, RF and microwave signal measurements, microwave backhaul testing, or cellular signal measurements, the Spectrum Master MS2720T gives you the tools you need to make the job easier and more productive. Exciting new features and options bring more value and speed to the user. Broadband preamplifiers over the whole frequency range for increased sensitivity approximately 17 dB, Resolution and Video Bandwidths from 1 Hz to 10 MHz. New triggering choices, including hysteresis, hold-off, and delay Burst detect captures 200s bursts the first time and every time are some of the key features..
| Other Specifications Download Specification | |
|---|---|
| Description Of The Item | Spectrum analyzers 26.5GHz |
| Frequency Range | 9 kHz to 26.5 GHz |
| Aging Rate Of Spectrum Analyzer Frequency: Better Than 1x10-6 /Year | Yes |
| Frequency Counter Resolution(min.) | 1 Hz |
| Frequency Span | 0Hz(zero span),1kHz to 3GHz |
| Spectral Purity:SSB Phase Noise @10KHz Offset Shall Be Less Than -90dBc/Hz At 1GHz | Yes |
| Spectral Purity :Harmonics @ -40 DBm Level Shall Be Less Than Or Equal To -60dBc | Yes |
| Sweep Time @span >or= 1 KHz | 0.1S to 1000 s |
| Sweep Time @span = 0 Hz | 10 micro S to 2000 S |
| Resolution Bandwidth (-3dB) | 10 Hz to 3 MHz in steps |
| Video Bandwidth | 10Hz to 1 MHz in steps |
| Amplitude : Max Input Level For Protection | +30 dBm |
| Amplitude : Max Input Level For Measurement | +20 dBm |
| Amplitude :level Measurement Uncertainity | dB |
| Average Noise Level Displayed | 300HzRBW,10Hz VBW: |
| Markers | Normal and delta |
| Trigger | Free run, video, External |
| Display | TFT Colour display with provision for three traces |
| Interface | USB and LAN |
| Measurement Features | CN ratio,AM,time domain power measurement,channel power measurement,Phase noise measurement,TOI,OBW |
| Software For Transfer Of Screen Shot/measurement Data To PC | Yes |
| 2-port Vector Network Analyzer Functionality ,for General Purpose Testing Applications In The Field,specially For Cable And Antenna Measurements, Is Available. | NA |
| Frequency Range For 2port Vector Network Analyzer | 2 MHz to 3 GHz |
| Frequency Resolution (CW ON) For 2port Vector Network Analyzer | NA Hz |
| Return Loss For 2port Vector Network Analyzer | NA dB |
| VSWR For 2port Vector Network Analyzer | NA |
| Cable Loss For 2port Vector Network Analyzer | NA dB |
| For 2port Vector Network Analyzer: Calibration With Precision Calibration Components-open, Short, Load Should Be Included To Achieve Directivity > 35 DB | NA |
| For 2port Vector Network Analyzer: Distance-to-fault In Co-axial Cables Shall Be Possible | NA |
| Phase Range For 2port Vector Network Analyzer | NA degree |
| Phase Resolution For 2port Vector Network Analyzer | NA deg |
| RF Output Port For 2port Vector Network Analyzer | Type N, female, 50Ohm |
| Dynamic Range For 2port Vector Network Analyzer | NA dB |
| Nominal Port Power Output For 2port Vector Network Analyzer:Hi Power/Lo-Power Selectable(power Levels Corresponding To Hi And Lo Levels Shall Be Indicated By Bidder. | NA |
| Measurement Of S11 & S21 And Smith Chart Measurement Shall Be Possible | NA |
| For 2port Vector Network Analyzer :Vector Voltmeter For Comparision And Verification Of The Phase Of The Phase-matched Cables Shall Be Available | NA |
| For 2port Vector Network Analyzer:Group Delay Measurement Shall Be Possible.Details To Be Declared | NA |
| Operating Temperature | 5 to 40 degree C & 80 RH 40 degree C |
| Power Requirement | 230 +- 10 VAC, 50Hz & External DC Input +12.5V to 15V with rechargeable battery of 1500 mAH or higher |
| Warranty | 3 years |
| OEM Shall Have ISO:14001 Certification For Their Manufacturing Works | yes |
| One Set Of Operation And Maintenance Manual Shall Be Supplied | yes |
| Standard Accessories Shall Be Supplied | yes |
| Availability Of Test Reports From Central Govt/NABL/ILAC Accredited Lab Covering All The Features & Functional Requirements Including Environmental Tests As Per Specifications | yes |
| Test Report No | A2L Certificate No. 2160.01 |
| Test Report Date | 01.06.2016 |
| Name Of Lab | Anritsu Company, USA |
| Address Of The Lab | 490 Jarvis Drive Morgan Hill CA-095037 |
Price Dekho Price List in india© 2018 GeM All rights reserved.
