× All the transactions performed on 2.0 is available here. To access Market click "Home".

Dell SCv3000 3Ux16 Drive Storage Array (DELLEMC)(Dell SCv3000 3Ux16 Drive Storage Array)

` 1,648,163.83

  • MRP: `1977796.60

Dell SCv3000 3Ux16 Drive Storage Array, SCv30X0 Dual Controller Components, 16Gb FC, 2Port, PCI-E, Full height, 1.8TB, SAS, 12Gb, 10K, 3.5 HDD.

  • Availability: 5 In Stock
  • Min. Qty. Per Consignee: 1
  • Type of Drive - SAS
  • Minimum number of Front end ports - 4
  • Minimum number of back end ports - 2
  • Drive slot Scalability - 190 No.
  • Broad Specification of SAN System on SATA II/NL-SAS Drive 0n 7.2 K RPM : The system comprise of : 1. Set of fibre channel cables with LC-LC connectors 5 m long (for each active port on the storage). 2. Min Two controllers (or as applicable for model uploaded on the GeM ) in specified configuration. 3. SATA II disk array populated with dual ported SATA II or NL-SAS drives, redundant power supply and fans, hot-swappable. 4. Two redundant hot-swappable active-active RAID controllers configured for RAID 0, 5/6 RAID levels or better. The usable capacity should be configured on RAID 5/6 or better. For every 30 disk, one spare disks needs to be configured over and above the required capacity. 5. Storage management software for configuration and multi-pathing (part of the supply). 6. Multi-pathing and load balancing and fail over software with license for 16 windows/Linux servers or shall support native multipathing of OS (part of the supply). 7. All interconnecting cables and connectors. 8. Snapshot license of the provisioned capacity (part of the supply). 9. The array is supplied with 4 x 1 Gbps or higher iSCSI ports native or through additional controllers (part of the supply). The System shall support : 1. 1/2/3/4TB LFF 7200RPM SATA/NL-SAS drives. 2. Hardware based data replication at the array controller level. 3. The array is capable to support remote replication to DR location. 4. On line micro code upgrade and disk expansion upgrade without downtime. 5. Configuration in "No Single Point of Failure" for disk drives, power supply. 6. SAN Storage to be configured with Host kits which will connect to the SAN Storage. - In-compliance with the specifications
Other Specifications Download Specification
Usable Capacity Of SAN System 10 TB
Type Of Drive SAS
Minimum Number Of Front End Ports 4
Minimum Number Of Back End Ports 2
Total Configrable Cache Per Controller 4 GB
Drive Slot Scalability 190 No.
No Of Drive Slots Populated In The SAN System YES (1 Disk Enclosure) No.
Broad Specification Of SAN System On 6Gbps Or Higher On SAS Drive 10 K RPM / SSD : The System Comprise Of : 1. Set Of Fibre Channel Cables With LC-LC Connectors 5 M Long (for Each Active Port On The Storage). 2. Min Two Controllers (or As Applicable For Model Uploaded On The GeM )in Specified Configuration With Front End Port, Back End Port And Disc With 6 Gbps Speed. 3. Disk Array Populated With Dual Ported Drives Of 6Gbps Or Higher Disk, Redundant Power Supply And Fans, Hot-swappable. For Every 30 Disk, One Spare Disks Needs To Be Configured Over And Above The Required Capacity. 4. Two Redundant Hot-swappable Active-active RAID Controllers Configured For RAID 5/6 RAID Levels Or Better. The Useable Capacity Shall Be Configured On RAID 5/6 Or Better. 5. Storage Management Software For Configuration And Multi-pathing(part Of The Supply). 6. Multi-pathing And Load Balancing And Fail Over Software (part Of Supply) With License For 16 Windows/Linux Servers Or Shall Support Native Multipathing Of OS. 7. All Interconnecting Cables And Connectors. 8. The Array Be Supplied With 4 X 1 Gbps Or Higher ISCSI Ports Native Or Through Additional Controllers(part Of The Supply) For Item Uploaded. 9. Snapshot License Of The Provisioned Capacity (part Of The Supply). 10. The Storage Is Configured To Connect Minimum 16 Hosts. 11. The Storage Is Configured Along With Host Kit. The System Supports: 1. Hardware Based Data Replication At The Array Controller Level. 2. Storage Array Based Management Of Complete Array, The Software For Array Management Shall Be Turning On Array Controllers In High Availability. 3. The Array Is Capable To Support Remote Replication To DR Location. 4. On Line Micro Code Upgrade And Disk Expansion Upgrade Without Downtime. 5. Configuration In "No Single Point Of Failure" For Disk Drives, Power Supply. 6. SAN Storage To Be Configured With Host Kits Which Will Connect To The SAN Storage. In-compliance with the specifications
Broad Specification Of SAN System On SATA II/NL-SAS Drive 0n 7.2 K RPM : The System Comprise Of : 1. Set Of Fibre Channel Cables With LC-LC Connectors 5 M Long (for Each Active Port On The Storage). 2. Min Two Controllers (or As Applicable For Model Uploaded On The GeM ) In Specified Configuration. 3. SATA II Disk Array Populated With Dual Ported SATA II Or NL-SAS Drives, Redundant Power Supply And Fans, Hot-swappable. 4. Two Redundant Hot-swappable Active-active RAID Controllers Configured For RAID 0, 5/6 RAID Levels Or Better. The Usable Capacity Should Be Configured On RAID 5/6 Or Better. For Every 30 Disk, One Spare Disks Needs To Be Configured Over And Above The Required Capacity. 5. Storage Management Software For Configuration And Multi-pathing (part Of The Supply). 6. Multi-pathing And Load Balancing And Fail Over Software With License For 16 Windows/Linux Servers Or Shall Support Native Multipathing Of OS (part Of The Supply). 7. All Interconnecting Cables And Connectors. 8. Snapshot License Of The Provisioned Capacity (part Of The Supply). 9. The Array Is Supplied With 4 X 1 Gbps Or Higher ISCSI Ports Native Or Through Additional Controllers (part Of The Supply). The System Shall Support : 1. 1/2/3/4TB LFF 7200RPM SATA/NL-SAS Drives. 2. Hardware Based Data Replication At The Array Controller Level. 3. The Array Is Capable To Support Remote Replication To DR Location. 4. On Line Micro Code Upgrade And Disk Expansion Upgrade Without Downtime. 5. Configuration In "No Single Point Of Failure" For Disk Drives, Power Supply. 6. SAN Storage To Be Configured With Host Kits Which Will Connect To The SAN Storage. In-compliance with the specifications
SAN Switch Available
Storage System Is Compliance With IPv6 Yes
Scope Of Supply It includes installation, commissioning & integaration togather with all necessary software to make the system fully functional as intended.
Additional Capacity (Compatible With Main Usable Capacity Of SAN) Yes
If Yes, Additional Capacity Added Capacity as desired can be added upto 222 drives with same chassis. TB
Capacity Of Each Drive, Number Of Drive & Type Of Drive To Achieve Additional Capacity Dell EMC SCv3020 supprotsSSD/ SAS/NL-SAS drives for different capacity for future expansion
Operating Temp. Range 10 TO 35 Degree C
Storage Temp. Range 10 TO 35 Degree C
Operating Humidity (Rh) 10 TO 80 %
Storage Humidity (Rh) 5 TO 95 %
BIS Registration Under CRS Of MeiTY Yes
BIS Registration No ( Shall Be Furnished When Demanded By The Buyer) Will be available on demand of Buyer
Other International Certification Yes
If Yes, Type Of Certification & Certification No (Shall Be Furnished When Demanded By Buyer) Will be available on demand of Buyer
Warranty 3 Year
No Of Contrllers Available In SAN System 2
Capacity Of Drive And Type 1.8TB SAS 10K RPM
RAID Option RAID5
No Of SAN Switch Provided With The Sorage System 1
If Available, Type Of SAN Switch (@ 8Gbps Or Higher FC) NA
No Of Active Ports In The SAN Switch 8 FC ports 8Gbps
Standby Power Consumption Of System 1.485 KW
Max Power Consumption Of System 1.485 KW
Hardware Form Factor Of SAN System 3 RU
Hardware Form Factor Of SAN Switch 1 RU
Protocols Supported By The Storage From Day 1 FC/ iSCSI
Operating System Platforms And Clustering Supported By The Storage From Day 1 All Industry standrd OS

Price Dekho Price Dekho Price List in india