FAB ANALYSIS OF FRONIUS GRID TIED PRODUCTSLCD for Users Action and Interpretations of WorkingInteractive LCD display for user friendly Interface.Programmable outputs available to integrate with other similar devises.Self diagnostics, it can guide the user for cause and solution of any misbehavior.Input VariationCompatible with DG in absence of grid.Multimode - Active MPPTEasy string sizing due to wide MPPT voltage range.ProtectionsIP 66 enclosure ready for all environmental conditions.Overload protection by operating point shift power limitationReverse Polarity ProtectionData AnalysisInbuilt data logger with detail metering.Energy Management Option.MTTR / ServiceabilitySnap in technology. Wireless connectivity . WIFi/Ethernet/ RS485 wide variety of integrationoptions available with third party monitoring devices.Easy to install - detail installation support manual availableModular Architecture. Easy to service-less number of spares are required for maintenance.
Other Specifications Download Specification | |
---|---|
Rating Of Inverter | 25 KVA |
ISI Marked | YES |
If ISI Marked Yes, CM/L No. | IS 6943:1984 |
Mode Of Operation | To be used in conjunction with AC mains |
Nos. Of Phase | single |
Inverter's Output Wave Form | Pure sine wave |
Inverter Efficiency | 95 |
Switching Device | IGBT |
Total Harmonic Distortion | 3 % |
Operating AC Voltage Range | 240 -850 Volts |
Operating Frequency Range | 0-50 Hz |
Operating Temperature | -25 TO +65 degree cel |
Operating Relative Humidity | 1-100 % |
Load Power Factor | 0.95 |
Maximum Power Point Tracking(MPPT) | yes |
Galvanic Isolation Between Input DC & Output AC | yes |
Ingress Protection Rating Of Inverter | IP 65 for outdoor use |
Built In Protection For AC High/low Voltage & Frequency If Connected To AC Mains | IP 65 for outdoor use |
Output Regulation At Rated Voltage | Yes |
By-pass Facility If Connected To AC Mains | IP 65 for outdoor use |
Over Load Protection 110% For 60 Seconds ,125% For 30 Seconds And 150% For 5 Seconds | yes |
Display Type | LCD |
Display Parameters Like DC Voltage(V),DC Current (A), AC Voltage (V) | YES |
Conformity Of Inverter To Environmental Testing Conditions As Per IEC 600688-2 (1,2,14,30) Or Equivalent BIS Standard | YES |
Sequence Of Power Drawing | 1. SPV 2. AC Mains( if connected with AC power) 3. Battery bank |
Nos. Of Modules In An Array | 100 NOS. |
Rating Of Individual PV Module | 250 Wp |
Efficiency Of Solar Panel | 15.6 % |
Reverse Polarity Protection For PV Modules | yes |
90% Performance Warranty For SPV | 10 years |
80% Performance Warranty For SPV | 25 years |
Salt Mist Corrosion Resistant Material For Body & Frame Of SPV Module | Aluminium |
Area Required For Installation Of Solar Pannels With Mounting Structure | 150 sq. mt |
TTC For PV Module From Any MNRE Lab As Per MNRE 2015-2016 | yes |
Test Report Number | KIP0001136 |
Date Of Test Report | 04/28/2016 |
Name And Address Of Laboratory | KIWA |
OEM Test Report For Indigenously Produced PV Module(s) | yes |
Provision For Solar Generation Meter | yes |
Provision For Bidirectional Meter(Net Meter) | yes |
Provision Of Anti Rusting/ Non Corrosive Mounting Structure | yes |
Material Of Mounting Structure | Galvanised steel |
Sustainability Of Wind Speed. | 150 KM/Hr |
Type Of Battery | VRLA KM/Hr |
Battery Backup Time At Rated Load | 2 Hour |
Battery Bank Voltage | 290 Volt |
Capacity Of Battery Bank | 50000 VAH |
3 Stage Battey Charging ( Float, Boost & Equalize Stage ) For Long Life Of The Battery | yes |
Reverse Polarity Protection | yes |
Complete Installation Work To Be Done By Supplier | yes |
Gross Weight Of The Inverter | 45 kg |
Availability Of Type Test Report For Inverter Including Environmental Tests From Central Government/NABL/ILAC Accridiated Laboratory To Prove Conformity To The Specification | yes |
Test Report Number | 201605301 |
Date Of Test Report | 04/15/2016 |
Name And Address Of Laboratory | ENERTECH UPS PUNE |
Type Test Report To Be Furnished On Buyers Demand | yes |