1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
Signal Generator.
| Other Specifications Download Specification | |
|---|---|
| Type | RF Signal Generator |
| Frequency Range | 9 KHz to 6 GHz |
| Frequency Resolution | 0,1 Hz |
| Ageing Rate For Reference Frequency (As Declared By OEM) | Less than 2 PPM/Year |
| Temperature Stability For Reference Frequency | Less than 2 PPM |
| SSB Phase Noise At 1GHz,on 20KHz Offset (dBc/Hz) | less than -105 dBc |
| Harmonics At 3 GHz Level At 0 DBm | less than -30 dBc |
| Non Harmonics (>10 KHz Carrier Offset) | less than -60 dBc |
| Non Harmonics (>50 KHz Carrier Offset) | NA dBc |
| Reverse Power Protection | 50V DC, 20W at 6GHz Watt Watt |
| Minimum Output Level | -120 dBm |
| Maximum Output Level | +13 dBm |
| Output Level Resolution | 0,1 dB |
| Total Accuracy Forall Specified Output Level At 25 Degree C In Continuous Wave Mode | +-0.8 dB |
| VSWR On All Operating Frequencies | 1.9 |
| Memory (Minimum Storage Settings) | 1000 |
| Amplitude Modulation (AM) Operating Modes | Internal & External |
| Minimum Amplitude Modulation Frequency (3 DB), F > 100 KHz | DC or 10Hz Hz Hz |
| Maximum Amplitude Modulation Frequency (3 DB), F > 100 KHz | 50 KHZ KHz |
| Modulation Depth | 0 to 100 % |
| Resolution Of AM | 0.10 |
| AM Distortion At 1 KHz | <2 |
| Frequency Modulation (FM) Operating Modes | Internal & External |
| Minimum Frequency Modulation Frequency (-3 DB) Standard | DC or 1Hz |
| Maximum Frequency Modulation Frequency (-3 DB) Standard | 7 MHZ |
| Minimum Frequency Deviation | 1 |
| Maximum Frequency Deviation | 40 MHZ KHz |
| Resolution Of FM | 0.025 of deviation or 1 Hz |
| Setting Error (at AF=1 KHz And 50% Max. Deviation) For FM | <0.4 |
| Phase Modulation | Available |
| If Available, Phase Modulation Operatinf Mode | Internal & External |
| Minimum Phase Deviation | 1.25 Rad Radians Radians |
| Maximum Phase Deviation | 20 Radians Radians Radians |
| Resolution Of Phase Modulation | 1 % |
| Setting Error (at AF=1 KHz) For Phase Modulation | < 0.2 (typ) [1 kHz rate |
| Internal Modulation Generator For AM/FM/PM | 0.1 Hz to 2 MHz tunable to 3 MHz with resolution of 0.1 Hz |
| Pulse Modulation | Not-Available |
| If Available, Pulse Modulation Operating Modes | NA |
| Rise And Fall Time | NA ns |
| On/Off Ratio | NA dB |
| Minimum Pulse Width | NA ns |
| Input Level | NA |
| RF Digital Sweep Range And Width | 9KHz to 6GHz |
| RF Digital Sweep Time Range | 100 s to 100 s |
| RF Analog Sweep | Not-Available |
| If Available, RF Analog Sweep Range And Width | NA |
| RF Analog Sweep Time Range | NA |
| Pulse Generator | Not-Available |
| If Available, Pulse Generator Operating Mode | NA |
| Pulse Width | NA |
| Pulse Delay | NA |
| Pulse Period | NA |
| Vector Modulation | Not-Available |
| Internal Base Band Generator Bandwidth | NA MHz |
| Arbitory Waveform Memory | NA Mega samples |
| Modulation | NA |
| Error Vector Magnitude (EVM) | 0 % |
| Phase Modulator | Not-Available |
| If Available, Range Of Modulating Signal (Wide Mode) | NA |
| If Available, Range Of Modulating Signal (Narrow Mode) | NA |
| Interface Available | USB, LAN, GPIB |
| Standard Acessories (To Be Supplied) | Country-specific power cord Documentation set (CD-ROM) 3-year return-to-JK warranty |
| Power Requirements | 230 V +/-10 AC, 50 Hz +/- 3 |
| Operating Temperature Range | 0 to 55 degree Degree C |
| Operating Humidity (RH) | Relative humidity at 95, 40 degree C % |
| "Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : 1. Dry Heat Test : 45 Deg C For 16 Hours As Per IS:9000/Pt.3/sec.5/1977 (reaffirmed In 2007) 2. Cold Test : 0 Deg C For 4 Hours As Per IS:9000/Pt.2/sec.4/1977 (reaffirmed In 2007) 3. Damp Heat Test: 95% RH At 45 Deg C, Two Cycles Of 24 Hours Each Separated By A Gap Of 4 Hours As Per IS:9000/Pt.5/sec. 1/1991 (reaffirmed In 2007) All The Functional Paramteres Are To Be Verified Before And After Recovery Period Of 1 Hours Of Above Environmental Test Sequence As Above. There Shall Be No Deterioration In Functional Parameters. | Yes |
| Test Report No. | 1016QFL04 |
| Test Report Date | 05/09/2016 |
| Name Of The Lab | JAS-ANZ |
| Warranty | 3 Years |
Price Dekho Price List in india© 2018 GeM All rights reserved.
